Red RC

February 22, 2018

7075.it Air Killer shock & diff air remover tool

Coming from Italian company 7075 Special Parts is the Air Killer air remover tool for shock absorbers and gear differentials. The compact device will create a vacuum, without the need for an additional pump, that removes air bubbles that can occur in freshly-built shocks and diffs and that are known to hamper performance and consistency. The tool, made using high-quality 7075 alloy, sports an inner shock and diff stand for convenient use with flashy black and white graphics making it stand out.

View another image here

February 22, 2018

WRC GTX 1.4 1/8th nitro on-road kit

WRC Racing keep updating their range of nitro and electric on-road kits with the latest being the GTX 1/8th car that has received a make-over and is now called the GTX 1.4. Subtle changes were made to areas such as the radio plate that sports an innovative floating design up front to optimise the chassis’ flex characteristics. Also new are redesigned servo mounts for a lower centre of gravity, the belt tensioner underwent an update and the kit features reinforced belts for greater durability. Last but not least comes a new, adjustable rear body mount. The GTX 1.4 is available now.

View more images here

February 22, 2018

Yeah Racing M07 black aluminium essential conversion kit

Yeah Racing’s recently introduced aluminium essential conversion kit for the Tamiya M07 M-chassis car is now also available in black colour. The set includes ball-raced C-hubs for a more precise and smooth front suspension and steering action, it utilises alloy front knuckles was well as 3 degree toe rear alloy uprights for improved precision especially on higher grip surfaces. Also included are lower A-arms that use O-rings to prevent the droop screws from getting loose over time and disturbing the suspension setting.

View more images here

February 22, 2018

X-Grip nitro engine motor bag

European X-Grip distributors Mikimodel have introduced a new motor bag for nitro on-road engines. The bag measures 220x290x60mm and it sports pre-cut protective inner foams to ensure safe storage and transportation of .12 or .21 on-road or off-road engines. Each bag can take up to two power plants and the bag, made from tough fabric, features a sturdy handle, a durable zipper and a transparent pocket to easily mark the bag in case more than one is in use.

View another image here

February 22, 2018

Xpress Execute XQ1 4.8mm low profile ball end set

Xpress have introduce a set of 4.8mm low profile ball ends for the Execute XQ1 touring car. They replace the standard closed-type ball ends with open type variants that allow for greater wheel clearance when used on the outer camper link positions. In addition the hard-composite ball ends will provide greater durability. Xpress has also announced a free upgrade program with existing XQ1 owners can receive a full set free of charge when contacting their Xpress dealer.

Source: Xpress [rc-xpress.com]

February 22, 2018

Exotek TLR 22-4 13.5 spec centre spool set

Coming from Exotek and made for the TLR 22-4 2.0 1/10th 4WD buggy is a 13.5 spec centre spool set. The super light slipper lock-out conversion greatly reduces the rotating mass of the 22-4 drive line for improved acceleration and lower motor temps which is needed in the very competitive 13.5 spec classes. The complete stock slipper assembly weighs in at 32g while the complete Exotek spool is only 19.7g. The axle is made of titanium to reduce weight but maintain durability and the locking plates are lightened polished aluminium. These eliminates the heavy steel shaft, slipper pads, springs and plates all while using the TLR spur gears and pulleys for easy replacement when needed. Due to the lightweight nature of the conversion it is recommended for 13.5T and 17.5T motors.

View more images here

February 22, 2018

PSM A215SV carbon fibre shock towers

PSM from Germany have introduced two carbon fibre shock towers for the popular Agama A215SV buggy. The front shock stay is machined from 5mm high-quality carbon fibre and was designed for heavy duty use thanks to its durable design. It features PSM’s unique double stacked rip machining for cool looks and a lower weight. The 4mm rear variant was developed to simplify vehicle setup while improving traction characteristics and it also spots a double stacked rib design. Both shock towers are available separately from now on.

View the rear shock tower here

February 22, 2018

2018 IFMAR Drift World Cup – Announcement

The world-famous Yatabe Arena in Tsukuba, Japan will play host for the 2018 IFMAR RC Drift World Cup from April 20th to 22nd. The race is organised by the R.C.D.C. Japan R/C Drift Community, that is spearheaded by Atsushi Ito and RC icon Masami Hirosaka, and the aim is to attract both current and future drift racers from around the world to compete in this exciting and constantly growing RC category. The race will be held in AWD and RWD classes and full information – including travel, hotel and sign-up information – can be found in the Stage 1 report here (large PDF file).