Red RC

February 6, 2018

Juan Carlos Canas sweeps Sevilla Championship Rd1

The opening round of the Sevilla-Huelva Championship was held at the Lebrija track last weekend and it was Mugen’s Juan Carlos Canas with the TQ and win in the 1/8th Nitro Buggy class. Juan Carlos would have a pretty easy main, leading from start to finish as HB Racing’s David Ronnefalk, coming from the 3 spot on the grid, obtained the runner-up spot. The podium was rounded out by Agama’s Dani Vega, who started from P7.

Source: Modelix Racing [modelixracing.com]

February 6, 2018

Xray XB2 graphite composite rear upright

Xray have introduced the new graphite composite rear upright for the XB2 and XT2 series of buggies and trucks. The part is moulded from a special graphite material that is harder than the previous “hard” compound, making the hubs ideal for racing in high to very high traction conditions where they can improve handling and corner speed. The zero degree toe uprights are usable on the left and right hand side of the car, they offer seven outer ball stud positions and utilise an outer 5x12mm and an inner 5x10mm ball bearing.

Source: Xray [teamxray.com]

February 6, 2018

Yeah Racing M07 bearing-supported steering rack

Yeah Racing have introduced the first in a line of forthcoming upgrade parts for Tamiya’s M07 M-chassis kit in the form of a bearing-supported steering rack. The design allows for 2mm steering Ackermann adjustments and greatly reduces the excess play that is hampering the original steering. Ball bearings make for smooth steering action and the blue anodising and silver edge details add visual impact to the car.

View another image here

February 6, 2018

RC Cars Cavalieri MBX8 CF arm inserts & tank guard

Coming from RC Cars Cavalieri and made for the Mugen MBX8 are a set of carbon fibre suspension arm inserts and a fuel tank guard. The 1.5mm carbon fibre arms inserts come in sets of four for the front and rear of the buggy and they allow to reinforce the lower A-arms as it can be useful in high-traction or high ambient temperature conditions in order to create a more precise handling. Also new is an add-on fuel tank guards that was designed to protect the tank from the heat of the exhaust system. All parts are a direct fit and available now.

View the tank guard here

February 6, 2018

Capricorn ONE GT 3.5cc nitro engine

Capricorn have introduced their new XRD-based ONE GT engine that as developed for the International GT class. The power plant features the same crankshaft and crankcase timing as the on-road engine but the cylinder is on a 5-port design and the engine makes use of a 7mm diameter venturi to comply with IFMAR rules. The unit also features a super-lightweight, low profile cooling head while a rear ceramic bearing can be installed upon request.

View another image here

February 6, 2018

Kyosho MP9 TKI4 hard dish wheels

Coming soon from Kyosho are hard dish wheels for the MP9 TKI4 series of 1/8th off-road buggies. According to Kyosho’s Yuichi Kanai the hard composite wheels, that fit most of today’s 1/8th off-road buggies, will perform better in high temperature and high humidity conditions and as they are of the same shape as the previous wheels, they will be marked with a large dot on the inside of the rim. The hard wheels will come in packs of four, in fluorescent yellow or white colour and they are about to hit stores soon.

Source: Kyosho [kyosho.com]

February 6, 2018

RPM Stampede 2WD rear bumper

Coming from RPM and made for Traxxas’ Stampede 2WD truck is an additional rear bumper. It combines scale looks with performance that works as it is designed to protect the rear of the chassis, the motor and the body, all while still allowing the use of a stock Traxxas wheelie bar. Additionally, if drivers decide to run without the wheelie bar, the rear bumper is so versatile, it will adapt and allow either configuration. The bumper for the Stampede 2wd consists of a scale bumper that uses design elements from many of today’s top full-scale bumper manufacturers. RPM start with an upper tubular shape, followed by faux stamped sheet metal filleted holes, a scale license plate area and with a final touch of a pair of scale 3” square openings for 5mm LEDs. The RPM bumper supports are designed tough, with serious impact absorption characteristics built in. With the use of an optional RPM rear bumper mount, the protection for the motor becomes nearly indestructible. The rear bumper is available in black or blue colour and it is made from engineering grade nylons.

View more images here

February 6, 2018

JConcepts Super Cup Championship Series Rd2 – Report

Round 2 of the 2018 JConcepts Super Cup Championship Series made its way over to Newberry, Florida, home to one of the raddest RC tracks in the Sunshine state. Without a doubt, the size and premise of Newberry’s track are just about perfect for a 1/10th scale outdoor track. With a dialed, low-style driver stand to bring you closer to the action is a recipe for an exciting time in Newberry. Florida’s winter is actually nice for those who aren’t accustomed to 20°C weather in early February. However, since the track is located in an open field, constant wind gusts combined with below 5°C temps did make it a “cold” day by Floridian standards. Nonetheless, the sun did shine reminding everyone the beauty of outdoor racing. With nearly 190 entries on hand, the energy was soaring and the racing top notch.

Continue reading the report here