Red RC

December 20, 2017

2017 Keilor Cup & Victorian Drivers Series Rd4 – Report

The fourth and final round of the Victorian Drivers Series was held at the Keilor Track in Melbourne. Over 130 entries were received for the event, which was re-run two weeks later than planned due to unseasonal summer rain washing out the original date. The Keilor club had prepared a classic outdoor dirt track which grooved up through the weekend but still had a fine dust layer in the hot summer weather, making tyre choice and setup critical to get maximum traction. Racers had travelled from as far away as Broken Hill, Mildura and Adelaide to join in this successful series. The Keilor Cup this year had extra meaning due to the recent passing of life member and long time president Mark Polistena, and many racers carried memorial stickers on their vehicles to honour his memory.

Continue reading the report here

December 20, 2017

XTR introduce new module 1 on-road pinion gears

Coming from XTR Racing are new module 1 pinion gears especially for on-road applications. Available as 23T to 26T variants the gears come in handy especially for 1/8th GT cars as their larger tooth numbers help to extract more top speed.

Source: XTR [xtr-rc.com]

December 20, 2017

Xray XB2 & XT2 soft graphite chassis side guard brace

Xray have introduced a graphite chassis side guard brace in “soft” configuration. The set allows to adjust the front chassis stiffness, making the vehicle easier to drive and increasing corner speed in certain track conditions. In addition the parts make for more forgiving landings. The set is usable for the XB2C, XB2D and XT2.

Source: Xray [teamxray.com]

December 20, 2017

RCManiacs Cup – Report

The RCManiacs Cup was held recently at the RCManiacs asphalt outdoor track with racers from Athens, Patra and Argos in attendance. Kiriazis Michalis took the TQ in the Touring Modified class while posting a new lap record in the process. In the A-mains, Kiriazis would score three wins to secure an undefeated win, however he was in a close battle with Fillipos Issakidis 2nd and Christos Vasilopoilos 3rd.

Continue reading the report here

December 20, 2017

ProTek Graphene LiHV & lightweight RX battery packs

AMain Hobbies have introduced two new Silicone Graphene LiHV battery packs as well as a lightweight LiPo receiver battery. Starting with the LiHV packs, first up is the 2S 7.6V 100C Silicone Graphene LCG pack with a capacity of 5600mAh. It measures 138.5×46.5×22.5mm, weighs in at 245g and comes in handy in all applications that require a medium capacity and lightweight battery. The hardcore battery utilises 5mm bullet-type power connectors and a standard 2mm balancer tube.

Continue reading here

December 20, 2017

IGT8 GT pinion remover tool

IGT8 have introduced their new pinion remover tool for 1/8th nitro GT cars. Machined from aluminium and coming red anodised the part holds the clutch bell in place while fastening or undoing the 1st and 2nd gear pinions, ensuring easy handling while being gentle to the gears.

View more images here

December 20, 2017

Mibosport Cup Rd3 – Report

The third round of the Mibosport Cup was held at its traditional location, a sports hall in the small town of Hrotovice in the Czech Republic. Taking place the weekend before Christmas added to a holiday atmosphere and everybody seemed to enjoy themselves, as racers could be found wearing Santa’s caps and under the smell of brake cleaner was a nice touch of vanilla coming from sweets in little boxes. And even though the holidays are around the corner, the race again counted 230 entries, showing the series has place in everybody’s calendar despite it being Christmas time. The event kicked off with free practice on Friday and the majority of racers used the opportunity to fine-tune their gear. Especially the Formula class was a nice surprise, attracting 35 drivers.

Continue reading the report here

December 20, 2017

SMJ TC wing endplates, body patches & antenna pipes

SMJ have introduced a range of accessories such as pre-cut wing endplates for 1/10th touring car body shells, body mount patches and also flex antenna tubes. Starting with the endplates, they are available pre-painted in black colour or with a mirror finish and due to being pre-cut they help to speed up body preparation. The black endplates come in pairs and are available in standard 0.8mm or lightweight 0.5mm thickness while the mirror-type plates are available exclusively in 0.5mm thickness.

Continue reading here