Red RC

June 19, 2017

RC-Cox 5mm LiPo battery safety plugs

PPM RC Racing have introduced the new RC-Cox 5mm LiPo battery safety plugs. Made from a soft material the plugs were designed to cover the unused openings of through-type LiPo battery connector tubes, keeping them from becoming dirty and damaged while also avoiding putting the battery in the car the wrong way around which can result in short circuits during hectic plug in routines. The plugs are easy to remove yet strong enough to not fall off even when the going gets tough and they come in sets of ten, enough to outfit five 5mm connector battery packs.

Source: PPM Racing [ppm-rcracing.com]

June 19, 2017

Teamsaxo F1-180-V2 aluminium main chassis & pod plate

Coming from Teamsaxo are an aluminium main chassis and rear pod plate for the F1-180-V2 formula car. Machined from high-quality 7075-T6 aluminium and coming black anodised and with silver edge details, the chassis and pod plate will add overall rigidity to the chassis assembly which results in improved balance and a more stable car especially in high-grip conditions. Both the chassis and rear pod plate are available separately.

Source: Teamsaxo [saxoracing.com]

June 18, 2017

Coelho cruises to A1 win as Matsukura snatches 2nd

Having wrapped up his second consecutive Euro Touring Series title by taking the TQ in Slovakia this morning, Bruno Coelho made light work of his opposition to cruise to the win in A1. Almost immediately the Xray driver would establish a lead while the rest of the field backed up behind team-mate Alexander Hagberg. Spinning out on the curbing at the one & a half minute mark would end Marc Rheinard’s race as he got collected by Infinity team-mate Akio Sobue resulting in the front left corner being pulling off the German’s car. This would take the pressure from behind off Matsukura allowing him to focus on finding his way passed Hagberg, the Japanese driver forcing a mistake from the Swede on the penultimate lap to get passed for second. Despite setting the slowest fastest lap of the race, Ronald Volker would finish 4th behind Hagberg, the World Champion clearly having to dig deep to make up for his car’s lack of pace.

Continue reading this report here or view our complete event coverage here.

June 18, 2017

Coelho wraps up title with TQ at ETS Slovakia

Bruno Coelho has wrapped up his second Euro Touring Series title after the Xray driver claimed the overall TQ this morning in Slovakia. The reigning champion secured his fourth TQ of the season when he again topped the times in the second of the qualifiers at the rain effected 5th round with the bonus championship for the TQ putting amends to his only remaining title rival coming into the weekend, Ronald Volker. Behind Coelho, Alexander Hagberg made it an Xray 1-2 line up for the triple A-Mains as he managed to better the Q1 time of Naoto Matsukura to move ahead of the Infinity driver. Behind Matsukura, team-mate Marc Rheinard will line up 4th with Volker completing the top half of the grid.

Continue reading this report here or view our complete event coverage here.

June 17, 2017

2nd qualifier deferred to final day at ETS Slovakia

Despite efforts to get the track dry to allow for a second round of qualifying today at ETS Slovakia, the decision has been made to defer Q2 to the tomorrow’s final day at the penultimate round of the championship. Having just managed to get the first round of qualifying completed after a wet start to the day and Friday having been a washout, the rain returned to the Hudy Arena as Q2 got underway stopping the action once again. Starting as a light drizzle it worsened and while many drivers took to sweeping and drying the track once the rain stopped, the evening drop in temperature and lack of sunshine mean’t it never completely dried. Opened for free practice, cars struggling to get around, the decision was then made to call it a day. With Sunday’s forecast showing a nice dry day in Trencin, the organisers have set a 07:00 start time so as to get a second round of qualifying in ahead of running the finals. With just two rounds of qualifying, drivers will count their best round with the fastest time the tie breaker leaving overnight Top Qualifier Bruno Coelho in a strong position to take the overall TQ. Such an outcome would secure the Xray driver back to back ETS titles.

View our complete event coverage here.

June 17, 2017

Coelho takes important Q1 from Matsukura at rain effected ETS Slovakia

With rain effectively wiping out yesterday’s action at the Hudy Arena, qualifying at Euro Touring Series finally got underway this afternoon with Bruno Coelho taking an important TQ run in the first of the 3 rescheduled qualifiers from a surprise Naoto Matsukura. With drivers getting only 3-minutes of running yesterday, they would again have to play the waiting game this morning as further rain delayed proceedings at the 5th round of the championship. Getting another 3-minute practice run once the track had dried after the morning downpour the expectation of further rain meant the stakes for Q1 were high. Having topped Thursday’s sun drenched free practice, it would be Marc Rheinard who led away the top heat but a minute in the Infinity driver would make a mistake. This left team-mate Matsukura to go to the top but a strong finish from Coelho, who had issues with his Xray being blown around the track by the wind, allowed the champion elect to TQ by 7/10ths from Matsukura with Alexander Hagberg getting third ahead of Rheinard. For Coelho’s only remaining title contender, Ronald Volker, the event is proving hugely challenging with the Yokomo driver describing his P6 as a ‘miracle’.

Continue reading this report here or view our complete event coverage here.

June 16, 2017

Protoform RT-C lightweight rubber tyre oval body shell

Protoform’s latest oval racing lid is the RT-C lightweight rubber tyre body shell. The XFINITY Series continues to provide full scale stock car fans with close exciting racing in 2017. Protoform now presents an oval body inspired by the newest generation of these cars. The RT-C has a bit of a twist though, as it is configured to fit perfectly over the taller rubber and capped tyres. Rubber tyres on carpet oval cars have put driving skill and a new element of fun into the oval scene. The longer lasting rubber tyre format saves time and money as well, eliminating the tyre truing process. The RT-C offers a large rear spoiler to aid in tuning – for that perfect front to rear balance, while the left side of the body is bumped out for extra battery clearance. The RT-C is produced in high-quality .025″ polycarbonate and includes spoiler mounting hardware, protective film, window masks and a decal sheet. This body will also fit most popular 200mm sedan chassis.

View more images here

June 16, 2017

MIP TLR 22 Bi-Metal Super Diff kit

Coming from MIP and made for the TLR 22 series of buggies and trucks is the Bi-Metal Super Diff kit. It features a race-proven 2-piece outdrive design that helps to shed about 30 percent of the OEM rotational mass without sacrificing strength and durability. To compliment the advantages of the Bi-Metal outdrives it also includes all-American diff components including tungsten carbide diff balls, diff rings, 2-piece captured thrust assembly, bearings, machined aluminium T-Nut, and a new spring/screw. Also part of the package are updated aluminium diff hubs that now accept the TLR dimension diff rings, allowing for easier rebuilds. The diff fits all 22 series vehicles and it is available now.

View another image here