Red RC

June 12, 2017

Schumacher BTCC Rd3 – Report

The Schumacher BTCC series Rd3 moved on to the midlands based Stafford track this weekend. Over the four classes there were some epic battles across the board. In modified the usual suspects Olly Jefferies, Elliott Harper and Chris Grainger were battling it out for top spot in what were tricky conditions for the high powered cars. Super high winds and lower traction after overnight rain made it tough for the competitors. Olly pipped Elliott for overall TQ by less than a second after the tie break of two wins each, Chris Grainger qualified third. In the two legged finals Olly took the wins ahead of Elliott with Zak Smith coming from 4th on the grid up to 3rd overall.

Continue reading the report here

June 12, 2017

Jokerteam GT12 Championship Rd4 – Report

With track temperatures reaching 57°C degrees during the afternoon’s finals, the drivers who gathered in Bolzano (Italy) for the fourth round of the Jokerteam 2017 GT12 Championship struggled to find the right setup for their cars in order to allow the tires to last the whole 6 minutes of each A-main. With the Championship being at the half-way mark and Mattia Dall’Oca being able to deliver a hat-trick in the previous rounds, bets were on in the pits to see if the Team Schumacher driver was able to make it four in a row.

Continue reading the report here

June 12, 2017

Dominic Quek takes rd6 of Urban Touring Series

Round 6 of Singapore’s Urban Touring Series saw a bigger than normal turnout this past weekend. With most of the top Singapore drivers participating, Dominic Quek (Xray) was made to work for his 5th win of the season. The morning’s seeding practice saw Leonard Sim (Awesomatix), who finished 2nd in Round 5, state his intentions when he put in the quickest 3-lap run. PY Tang (ARC), making his first appearance of the year in the series, would be seeded 2nd just 0.062 secs behind, while series leader Dominic was seeded 3rd.

Continue reading the report here

June 12, 2017

HB Racing multi function tool

HB Racing have released this multi function tool, an essential item for in your tool box. Able to punch perfect vent holes in tires, with 1/10 and 1/8 punch sizes included, it securely holds shock shafts without scratching the finish (3/4/5mm shafts), holds 1/8 shock bodies and caps for maintenance and allows the assembly and disassembly of uniballs. The MFT is precision machined from aluminium and anodized black, it’s spring loaded and can be locked with a body clip.

Source: HB Racing [hbracing.com]

June 12, 2017

Speedzone 7200mAh 100C LiPo Pack

Speedzone have released this 7200mAh 100C LiPo Pack to their Peerless Series Line. Coming in standard 2S dimensions and meeting ROAR, EFRA, BRCA and IFMAR specs the packs are available with 4mm bullet connectors as well as pre-wired packs with Deans and Traxxas style plugs.

Source: Speedzone [speedzoneusa.com]

June 9, 2017

Ty Tessmann & Xray win at Manufacturers’ Cup

AMain Performance Hobbies hosted the Inaugural Manufacturers’ Cup presented by Tekin at Silver Dollar RC Raceway last weekend. The race pitted the top pros against one another in four heads-up 14-minute races. Many of the elite drivers were in attendance including: Ryan Maifield, Adam Drake, Ryan Cavalieri, Ty Tessmann, Ryan Lutz, CJ Jelin, Austin Blair, Joe Bornhorst and Jared Tebo.

Continue reading the report here

June 9, 2017

Caroli & Laubscher win Rd2 of South African 1/12th Nats

The second round of the 2017 South-African ORE 1/12th national championship series was held at the Welkom RC Arena on Saturday 03 June 2017, host of the WC in 2018. Most of the drivers arrived Friday for some practise and setup and from the practise times set it was clear that the local man Antonio Caroli was the driver to beat in Modified and Francois Laubscher in the 13.5T blinky stock class.

Continue reading the report here

June 9, 2017

Raceform Lazer Jig 1/8th truggy tyre gluing jig

Raceform have introduced their latest Lazer Jig, a dedicated tyre glueing station, this time for 1/8th truggy tyres. Compact and lightweight the jig features a clincher roller that peels off the tyre bead while automatically aligning the bead after applying the glue and further rotating the tyre. When turned anticlockwise, the roller also presses the tyre towards the rim. The overall design makes for extremely convenient operation while an anti-slip under site allows for a secure stand on the pit table or workbench. The tool is machined from high-quality plexiglas, it takes all standard 1/8th truly rims and tyres and comes with a 3-piece needle applicator and decal sheet.

View more images here