Red RC

May 24, 2017

RPM B6-series rear bumper & skid plate

RPM have introduced a rear bumper and skid plate for the Team Associated B6 and B6D buggies. Weighing in at only 5.5g the part hardly adds any weight but it is 52mm wide and extends rearward by roughly 32mm at a 45 degree angle for added rear bulkhead, A-arms and differential protection. Additionally it sits 2.4mm beneath the chassis. This skid area of the bumper lends extreme skid resistance to the back of that expensive aluminium chassis and helps reduce skid and impact damage to the rear of the buggy.

View another image here

May 24, 2017

JConcepts YZ-2 DTM Fin titanium turnbuckle set

Coming from JConcepts and made for the Yokomo YZ-2 DTM 2WD buggy is the Fin titanium turnbuckle set. Designed to replace the kit’s standard steel turnbuckles, the 6-piece set includes lightweight yet durable links whose design is centred around a .143″ titanium hex size which gradually tapers down into a 3mm thread base design which accepts the standard Yokomo ball-cup configuration. The focus of the styling surrounds the lengthened adjustment hex area and the “finned” cuts that rotate about the centre. The JConcepts turnbuckles are produced with left and right hand threads, the left conveniently marked for easy orientation.

View another image here

May 24, 2017

RC-Lemans Series Rd2 – Report

The second round of the RC-Lemans Series was held at the Dutch Apeldoorn track. A dusty track on Friday made things challenging for the handful of drivers that attended the free practice with overnight rain solving the dust issue but the track still offered relatively low traction. In the fast LMP1 Modified class Reinder Wilms laid down the fastest run after the three rounds of qualifying. The traction level increased from round to round and already in Q2 Reinder was a lap quicker compared to Q1 with Tim and Kai Altmann coming in 2nd and 3rd. Despite two quick runs from Reinder, Kai would snatch the overall TQ in the final round from Tim and Reinder. Christian Fischer and Joachim Behnken completed the top 5 result.

Continue reading the report here

May 23, 2017

Associated B64 HRC suspension mounts & steel weights

Coming from Team Associated and made for the B64 series of 1/10th 4WD buggies are new high roll centre C and D mounts as well as Factory Team steel chassis weights. Starting with the suspension mounts, they are of the high roll centre configuration, adding more roll centre options to AE’s latest 4WD buggy. The suspension hangers are available separately, they are made from blue anodised aluminium and fit both the B64 and B64D.

Continue reading here

May 23, 2017

Xray XT8 2017 nitro truggy kit – Coming soon

Xray’s latest off-road kit to receive the 2017 treatment will be the forthcoming XT8 1/8th nitro off-road truggy. No details are available yet but expect the kit to hit stores very soon with the full presentation with all photos and information becoming available in time for the release.

Source: Xray [teamxray.com]

May 23, 2017

Swiss Nitro On-road Nationals Rd2 – Report

The second round of the Swiss Nitro On-road Nationals was held at the Aigen track in changing weather conditions. The event started off on Friday with practice rounds on a sugared track but during the afternoon it started to rain. On Saturday morning the track was still wet but it dried fast, allowing for another 20 minutes of practice to adapt the drivers and cars to the now much lower traction. Unfortunately during qualifying it started to rain again and in the 1/8th class it was Simon Kurzbuch who made the best out of the conditions to take the TQ in front of Hächler and Pesenti.

Continue reading the report here

May 23, 2017

Yee Kok Leong TQs & wins Kuala Lumpur Grand Prix

The 2017 encounter of the Malaysian Kuala Lumpur Grand Prix was held recently and in the premier 1/8th nitro on-road category it was an all Shepherd affair with Yee Kok Leong managing to secure the TQ position and leading from the start to the checkered flag with a faultless drive. Behind Yee it was Wong Yoong Keong who constantly fought his way up from his starting position at the back of the grid to finish 2nd in front of KK Lim in 3rd position.

Source: Shepherd [team-shepherd.com]

May 23, 2017

Savvas Savva wins at RCE Championship Rd2

Round 2 of the RCE Championship was held in Nicosia, Cyprus in windy and warm weather conditions. The bumpy high grip track made things interesting on the track and after the qualifiers it was Rafael Panayi who took the TQ with his Xray. Unfortunately in the main final he had to retire due to a servo problem and so it was Xray teammate Savvas Savva who obtained the top spot after the final, leaving Pantelis Makrides (Agama) and Antonis Panayiotou (Kyosho) behind in 2nd and 3rd respectively.

View the final results here