Red RC

March 17, 2017

Factory RC YZ-4 carbon shock towers & battery brace

Factory RC have introduced new carbon fibre option parts for the Yokomo YZ-4 1/10th 4WD off-road buggy. First up are front and rear shock towers made from 4mm black carbon fibre. Both the front and rear tower are of a beefier design while the rear part also allows for adjustable wing height. Thanks to Factory RC’s Leading Edge treatment the parts sport chamfered edges that make sanding unnecessary. Also new is the shorty battery brace that was specifically designed for a precise fit while allowing plenty of adjustment when running the battery cross wise in the chassis. Moulded Delrin stop blocks hold the battery firmly in place and full forward and reward battery placement can be achieved as well as in between positions and other configuration. Due to the thinner 3mm carbon fibre material full chassis flex will be retained.

View the other new parts here

March 17, 2017

HEC Asia Cup Rd2 – Report

Round two of the HEC Asia Cup, run in collaboration with the Serpent GT Cup, was held at Tom Racing Circuit in Hong Kong with about 70 entries in several nitro on-road classes. Ng Chiu Man would top qualify in the 1/8th nitro class and after a good start into the A-main he looked like he would bring home the win but some tome into the race 5th place qualifier, Kelvin Hui was able to close the gap to the leader quickly. At about the 35-minute mark both were only separated by about a second but with less than two minutes to go Hui’s car suffered an engine failure on the straight which allowed Ng Chiu Man to cruise to the win. 3rd placed Nelso Woo could not capitalise from Kelvin’s issue so he had to settle for 3rd while a lucky Kelvin snatched the runner-up spot.

Continue reading the report here

March 16, 2017

Orlowski targets first EOS title at Arena33

The Euro Offroad Series makes its second trip of the season to Germany this weekend (March 17-19) with the all new Arena 33 the venue for the penultimate round of the championship. With three of the expanded five round calendar to count, both Michal Orlowski and Bruno Coelho will be targeting wrapping up the Season #6 titles. Completing back to back victories in 2WD last time out at the Hudy Arena, a third consecutive win in Andernach would bring Orlowski and Schumacher their first EOS title and end Yokomo’s three year reign as champions of electric offroad’s premiere class.

Continue reading preview here

March 16, 2017

JConcepts Skull snapback hat

JConcepts have introduced their latest merchandise sporting the new-for-2017 JC Skull logo, a snapback hat. The front sports the new logo in patch form on the black snapback hat material while the rear of the hat features mesh type material to stay cool for those warm days at the track.

Source: JConcepts [jconcepts.net]

March 16, 2017

Eric Anderson takes ROAR 1/12th 13.5T title

The 2017 ROAR carpet nationals were held at 360v2 in New Rochelle, New York. The track is one of the bigger tracks in the US and it offered high bite and a fast flowing layout. In the 1/12th 13.5T class it was Xray’s Eric Anderson that took the win after the triple A-mains, courtesy of a 2nd, 1st and 4th place finish. Behind him Team Associated’s Joe Trandell would come in second with a 3rd and two 2nd place finishes while Speedmerchant’s Chris Tosilini would round out the top 3 with a win and two 3rd place finishes.

View the final results here

March 16, 2017

Factory RC B64 blue weave carbon fibre option parts

Coming from Factory RC and made for the Team Associated B64 series of 4WD buggies are blue weave carbon fibre option parts. The range includes a floating servo mount plate made from 2.5mm material and incorporating an antenna mount, next up is a 4mm battery strap that utilises the stock hardware and also new is an 18mm bellcrank input arm that offers reduced weight. Next up are 4mm front and rear shock towers with increased void volume in the centre for additional airflow towards the windscreen and improved airflow in the rear of the body. Also new are 2.5mm steering arms that are lighter than the aluminium parts and the range is rounded out by a 3-piece rear diff shim set including 0.5mm, 1.0mm and 2.0mm shims that allow to raise the rear or front diff case for improved dog bone plunge and increased grip. The blue weave carbon parts sport Factory RC’s Leading Edge chamfered edges which makes sealing the parts with CA glue a snap.

View the other new parts here

March 16, 2017

Jacky Mouton successful at French 1/8th Classic opener

The opening round of the French 1/8th Classic on-road Championship was held in Montbonnot, Grenoble, France. A total of 94 racers signed in, divided into 70 nitro and 24 electric class entries. In the nitro class, Jacky Mouton (Forfaster/VS Engines) came out successful in the main final from Serge Christiani (Forfaster/Forfaster) in second and Stephan Nicaud (Forfaster/VS Racing) third.

Source: Victosport [victosport.com]

March 16, 2017

Kalle Lehto takes FinTrack Tour Prostock title

The indoor portion of the FinTrack Tour recently concluded in Äänekoski with the fourth and final round. In the Touring 13.5T Prostock class the race for the title was on between Kalle Lehto and 2016 Champion, Vesa Yli. Vesa had won the opening round in Lahti while Kalle stroke back in round two and three, so Vesa needed to win at the finale in order to have a shot at the title. Right from the get go Kalle had an advantage though while Vesa struggled from an understeering car. After a good start into the third and final A-main Vesa was given a stop & go penalty for a crash he didn’t commit and so he had to settle for third overall behind Teemu Saarinen while Kalle took the day’s win and with it the overall title.

Continue reading the report here