Red RC

August 4, 2015

Lutz doubles at OS/Futaba Nitro Challenge

The OS/Futaba Nitro Challenge was held at the St. Louis Dirtburners track with a turnout of over 200 entries. The Levi Jackson built track was a lot of fun, watered and the grip level was pretty decent. As the sun got strong though the track began to dry quicker and it was made a decision to let it groove in early and hopes were it would hold together. By the end of practice on Friday everyone became aware that this wasn’t going as planned. The track got super dry and while there was a nice groove it had little holes in that groove that continually grew and spit out sand, dirt, and rocks. By the end of the weekend the track was a complete challenge as finding a setup to traverse the conditions was tricky. Everyone bemoaned about finding consistency and some found themselves using medium hardness tires, even though the conditions were loose.

Click here to continue reading

August 4, 2015

Upgrade RC Vortex 10 Seven 1/10th buggy rear wing

Upgrade RC’s Vortex 10 Seven Lexan wing was designed to suit mid-motor 2WD and 4WD 1/10th buggies. Just like its predecessor the unique Dimple System helps to decrease friction drag at higher speeds and increases downforce with reduced drag at low speeds. The wing comes with a set of two side number plates and mounting grids for easy installation.

Source: Upgrade RC [rcidcustom.com]

August 3, 2015

HPI Racing Pro-Series Temp Driver

The HPI Racing Pro-Series Temp Driver is a combined infra-red temperature gauge and a flat blade screw driver to adjust the needles of nitro engine carburettors. No longer multiple tools are needed trackside or while bashing to obtain perfect engine tuning. The tool allows to check the temperature of any nitro engine properly as the plug obtains the correct temperature reading, while the flat blade driver helps to fine-tune all carburettor needles. The tool is supplied in a metal tin and it can also be used by electric drivers wanting to keep an eye on motor, speedo, battery or tyre temperatures.

Click here to view the specifications and more photos

August 3, 2015

1/5th & 1/8th GT World Cup warm-up race – Report

The warm-up race for the 2015 1/5th and 1/8th GT World Cup took place last weekend in Kepong, Kuala Lumpur, Malaysia. Apart from the two classes of the World Cup, the race also saw 1/8th and 1/10th nitro on-road racing. In the 1/8th GT Class, Thailand’s Paphon C would take the TQ ahead of local drivers KL Lim and Nick Chong. In the 1/8th class Nelson Lee came out fastest from Alvin Ng.

Click here to continue reading the report

August 3, 2015

Xray NT1 1° king pin angle steering blocks

Xray have new steering blocks for the NT1 200mm nitro on-road car available. Designed for the use with carbon fibre aerodiscs the steering knuckles feature 1 degree king pin angle for improved in-corner steering. The parts are marked for easy identification and they are available separately for the left and right hand side of the car.

Source: Xray [teamxray.com]

August 3, 2015

Mon-Tech MF-10 bodyshell & moulded Formula wings

Italian company Mon-Tech has a new 200mm pan car bodyshell and moulded wing for 1/10th Formula models available. Starting with the body, the MF-10 is based off of the M-10 with both sharing pretty similar front end designs but the MF-10 has a more “1/8th scale-ish” rear portion with incorporated side dams and a large tunnel behind the cockpit to channel the airflow towards the rear wing. Moulded from high-quality 0.75mm polycarbonate material the body includes decals and window masks.

Click here to continue reading

August 3, 2015

Xray Work.Shop Denmark – Announcement

Glostrup RC track in Denmark will play host for the Xray Work.Shop Denmark on the 8th and 9th of August. Xray’s Mike Gosvig will sit down with interested Xray owners to provide technical and setup support for the company’s T4, XB4 2WD and 4WD cars. More information can be found here.

Source: Xray [teamxray.com]

August 3, 2015

Tonisport Onroad Series Austria – Report

Tonisport Onroad Series Austria

The pilot race of the Tonisport Onroad Series Austria was held at the 1. MRC Wiener Neustadt track in Vienna over the weekend. Despite being scheduled on the weekend before the EFRA 1/10th Electric Off-road European Championships in the UK the event attracted more than 100 drivers including international guests such as Bruo Coelho, Ronald Völker, Yannic Prümper and Marc Rheinard to name just a few. In the Touring Car Modified class Ronald Völker and Bruno Coelho fought for the TQ position with Marc Rheinard also being in the mix. At the end it was Ronald who came out fastest from Bruno and Marc.

Click here to continue reading the report