Made for the Hot Bodies D413 1/10th 4WD buggy is this suspension arm cover set. It includes four inserts for the front and the rear lower A-arms to replace the standard composite parts with items of higher rigidity. Running less flexible arms can be beneficial in high ambient temperatures and on very high bite surfaces as stiffer arms result in improved steering precision and slightly reduced overall traction.
Source: HPI Racing [hpiracing.com]
Reflex Racing introduce the RSD lightweight suspension kit for the Team Associated TC6.2 touring car. The parts not only shave weight, but also offer a revised geometry, with the front arms being wider and the rears being narrower, which makes the car more consistent and faster over a full race compared to the stock components. These parts are also far tougher and do not have quite the slop the stock parts have on the car. Included in the kit, that is available for pre-order now, are front and rear carbon arms, 4 degree C-hubs, rear hub carriers, outer hinge pins, arm shims, AE compatible rod ends and ball cups as well as pivot bushings and king pins along necessary hardware.
Click here to view more photos
Following a first teaser some time ago, Serpent now officially introduce the Natrix 748 1/10th 200mm nitro on-road car. Designed by Michael Salven and using input from Serpent’s key team drivers from around the World the 748 is the evolution step of the successful 747. The car makes use of many design features seen on the 1/8th scale Viper 977, such as the fully adjustable steering block system or the throttle linkage. The laydown steering and throttle servos are located in a 1-piece mount and as close to the centreline of the car as possible for improved handling. Also new and centrally mounted is a small radio box with the radio plate sporting a holder for the receiver battery plug that then can act as an on/off switch.
Click here to continue reading
Last weekend the final round of the Central German Championship took place at the WMC Wiesbaden track. In the Expert class it was a close fight for the TQ between the Shepherd drivers Oliver Mack, and Freddy Südhoff at his second outing with the Velox V8. After 4 rounds it was Oliver Mack who was on top of the time sheets with less than a second in front of Freddy Südhoff.
Click here to continue reading the report
Robert Batlle set the pace in the opening round of seeding practice at the 1:8 Offroad European Championships in Germany, the Mugen driver fastest over 5-minutes from the Kyosho of defending Champion David Ronnefalk. Winning his second European title the last time the championships visited the Sand am Main track, the Spaniard would outpace his Swedish rival by 2.644 seconds with Team Xray’s Martin Bayer completing the Top 3 a further 1.704 off.
Continue reading this report here or view our complete event coverage here.
The final race of the Mibosport Summer On-Road Cup 2014 took place at the permanent on-road track in Blansko with over 40 drivers from the Czech Republic, Slovakia and Poland in attendance. The TQ holder in the Touring Car Modified class was open till the very last qualifying session. After three sessions, David Nemcek held the prestigious TQ spot as his main rival, Radek Flek had very bad luck due to technical problems followed by a mistake of a marshal, who put another car right into Radek’s racing line, which cost him a broken suspension and a retirement from the qualifying round. Despite all those problems, Radek did not give up and he grabbed the TQ in the last qualifying session with the fastest time of 24 laps in 5:02.438.
Click here to continue reading the report
Avid now have this acrylic tweak plate for touring cars available. The car will be placed on top of it, the top deck screws will be loosened and tighten back up while pressing down on the car at the top and bottom of the battery and at the servo and speedo. This will help settle the chassis and get a true setting on the top deck. This acrylic tweak plate is an alternative to other units on the market and helps to save weight while travelling or keeping weight in that wallet.
Source: Avid [avidrc.com]
The International Indoor Championships announce that the official spec tire for the 10th Anniversary of the IIC will be the Gravity RC Type C. The tire comes pre-mounted on the marked Gravity RC rim, made from a blend of plastic and polycarbonate, and known to be durable and true. The part number for the tires are GRC130 G-Spec Type C and they are available from your local hobby shop or directly from the Gravity RC website.
