December 19, 2014

Ellis Stafford renews with Team Losi Racing

Ellis Stafford renews with Team Losi Racing

Horizon Hobby announce that Ellis Stafford has extended his contract with Horizon Hobby and TLR for the 2015 race season. Ellis has been the lead figure for the 1/10th scale team in the UK with some great results in his first season and with this experience he will be looking to better this years performance undoubtedly. He will continue to provide feedback on the UK race scene to the team in the states as well as developing set ups and contesting in the UK national series as well as the Euros that are to be held at the RHR facility amongst regional and club events.

Source: Horizon Hobby [horizonhobby.co.uk]

December 19, 2014

CS Electronic CS-Rocket V4 speed controller

CS Electronic CS-Rocket V4 speed controller

German company CS-Electronic introduce their latest 1/10th brushless speed controller, the CS-Rocket V4. The follow-up model of the controller that won the 2009 IFMAR 1/10th Buggy Worlds features a black anodised aluminium case, a 120A rating for a 3.0T motor limit, it is usable with 2S to 3S LiPo packs and comes with a 6V/3A BEC system. As for the software features the controller incorporates 10 Modified, Boosted and Blinky class profiles, and it is highly adjustable using an optional programming box or the included USB interface. The speedo is available in a standard or pre-wired version both of which include an add-on fan unit, power capacitor board, sensor wire, USB interface and PC software.

Click here to view the specifications and more photos

December 19, 2014

RDRP B5 series VTS Slipper Option Kit

RDRP B5 series VTS Slipper Option Kit

Revolution Design Racing Products introduce the VTS Slipper Option Kit for the B5 and B5M, designed to make the most out of the original Team Associated clutch. The 4-piece kit replaces the standard outer and inner aluminium slipper plates with vented variants for improved heat dissipation and fading-free operation. Also the centre VTS plate is replaced with a vented and hard-coated aluminium plate while the VTS slipper housing, originally a moulded composite part, is supplied in a lightweight, blue anodised and laser-etched aluminium variant. Like the slipper plate the housing is of a vented design to not only allow for better heat dissipation but to also lower its weight. All parts are precision machined from 7075-T6 aluminium and they are a direct fit on both the B5 and B5M.

Click here to view a photo of the parts installed

December 19, 2014

Xray 1/8th off-road graphite clutch shoes

Xray 1/8th off-road graphite clutch shoes

Xray release new graphite clutch shoes for their 1/8th nitro off-road clutches. They are made of a specially formulated composite material to ensure a long life due to less slip, which additionally increases the life of the aluminium clutch shoes if you choose to run these. The 2-piece set helps to fine-tune the clutch engagement as two alloy and one graphite shoe make for a smoother clutch action over an all-alloy clutch whereas one alloy and two graphite shoes give an even smoother engagement.

Source: Xray [teamxray.com]

December 19, 2014

Tyler Hook wraps up RC Pro Series Titles

Tyler Hook wraps up RC Pro Series Titles

The RCPro Series finals and Toys for Tots race was held this past weekend and it the 1/8th E-Buggy class Tyler Hooks was able to take the overall TQ over teammate Brian Henn. The two would fight it out taking 1-2 which would give Tyler the overall RC Pro Series Title. Tyler then would start 2nd in the 1/8 E-Truggy class and he would handily take A1 and A2 to wrap up his second RC Pro Series Title of the weekend.

Source: Tekin [teamtekin.com]

December 19, 2014

Exotek B44.3 aluminium front bulkhead

Exotek B44.3 aluminium front bulkhead-1

From Exotek comes an aluminium front bulkhead for the Team Associated B44.3 buggy. Machined from 7075 material the part incorporates two rubber arm bushings that help protect the front factory arms from cracking. The bushings coned shape holds the arms firmly in place but compresses down to absorb hard forward hits and the sleeved rubber portion dampens the arms and hinge pins further. The bulkheads also fits the B44.2 and it comes  blue or black anodised and laser-etched.

Click here to view more photos

December 19, 2014

Pro-Line B-Max2 Phantom bodyshell

Pro-Line B-Max2 Phantom bodyshell

Pro-Line’s distinctive Phantom bodyshell design is now also available for the Yokomo B-Max2 2WD buggy. From the mind of IFMAR World Championship runner-up Lee Martin the body is featuring a stealthy cab forward look and sweeping body lines that flow back to a single point. The optional centre fin adds additional high speed stability and finishes off the design of this unique looking body. The B-Max 2 Phantom fits snugly around the chassis for an ultra-low and super sleek look and the body includes window masks and a decal sheet.

Click here to view more photos

Tonisport
Mibosport
LC Racing
VP Racing
SRT
Monaco RC
T-Works