Red RC

May 14, 2014

Kiss-Orban wins at Hungarian nitro on-road nats Rd1

The Hungarian nitro on-road national series kicked off last weekend at the Hungaroring. The weather was a little bit tricky and the qualification heats where run under rainy condition, but fortunately the 30 minute final would be run under dry conditions. The TQ went to Zsolt Bajusz (Capricorn/Max), but he soon lost the first place due to a small mistake. This allowed Laszlo Kiss-Orban (Capricorn/Reds) to pass Zsolt and from that moment on he never looked back to take the win from Zsolt Bajusz and Matyas Mohl (Serpent/Picco).

Source: Capricorn [capricornrc.com]

May 14, 2014

Schumacher Cat/Cougar 1 degree rear hubs

Schumacher introduce new 1 degree rear hubs for the Cat 4WD and Cougar 2WD line of buggies. Made from high quality aluminium, the rear hub carrier is a popular upgrade part with more optional camber link holes and a CNC black alloy look. It has now been further improved with a brass insert for better life and less wearing of the pin and hub interface.

Source: Schumacher [racing-cars.com]

May 14, 2014

Team Orion Vortex R10.1 brushless speed controller

Seen for the first time at this year’s Nuremberg International Toyfair Team Orion’s latest competition 1/10th scale speed controller is about to hit the market. The Vortext R10.1 is the follow-up model of the successful R10 and features a new case design with a new-shape heatsink, a slightly redesigned black-colour case, a rubber cap to close the empty sensor port when needed and also all-black receiver and switch wires. Inside the 2S-compatible R10.1 sports new hardware for a lower internal resistance and increased current load capacities. The firmware also received an update for added punch in “boosted” stock classes while offering improved overall drivability to make for even smoother throttle response. We understand that the controller becomes available very soon.

Source: Team Orion [teamorion.com]

May 14, 2014

Tuning Haus charge accessories & mounting tape

Tuning Haus introduce several new products such as a pre-wired charge lead set, 4/5mm bullet connectors and two mounting tapes. Starting with the charge lead, the harness is designed for the use with the popular iCharger series, as well as many other chargers. The main leads are 460mm long and constructed from 10AWG silicone wire. The convenient double-sided bullet plugs allow convenient charging of packs with either 4mm or 5mm receptacles. The unused plug sides are covered with included rubber caps to safeguard against accidents. Balancing leads are configured for precision balance charging and the harness is finished with a mesh wire wrap to keep pit space work areas organised.

Click here to continue reading

May 14, 2014

Euro Contest 2014 – Announcement

Euro Contest 2014 - Announcement

The 2014 Euro Contest will take place on the weekend of the 29th of June at the Barco-Off track in Barco, Italy. The race sees an 1/8th Buggy Pro F1, Open F2 and 1/8th E-Buggy class with the 3-day event starting on Friday the 27th with free practice. More information about the event can be found on the organiser’s website, where you can also sign-in for the race, by clicking here.

May 14, 2014

Reedy 2S charge harness for 5mm connectors

Available now is this Reedy 2S charge harness for all 2S LiPo battery packs with 5mm bullet type connectors. The harness comes pre-assembled with 5mm gold-plated male plugs, and a JST-XH balancer connector. The 12AWG silicone wires can be equipped with a plug compatible to your favourite charger.

Source: Team Associated [rc10.com]

May 14, 2014

WRC F-One ‘014 kit & STX option parts

WRC F-One '014 kit & STX option parts

Italian company WRC Racing introduce their latest formula 1 kit in the form of the F-One ‘014 as well as new option parts for the STX touring car. Starting with the kit, information about the exact features are not available yet but looking at the renderings the car received quite a makeover compared to its predecessor with new front suspension parts that now feature vertical lower and horizontally mounted upper pivot balls, the steering is of a single bellcrank design with the steering links sitting very low as does the bellcrank thanks to a special design where the servo links attach from above while the actual steering lever sits below in a mid-deck. The main chassis place is cut from carbon fibre and very short, compared to the usual designs as the front of the chassis is made up by a separate parts that houses a low-profile steering servo and the steering assembly. The battery compartment takes a 2S shorty pack and the rear motor pod also looks redesigned but we have to await official information on the full features.

Click here to view more images and the other new parts

May 14, 2014

Drake doubles at JBRL Nitro Series Rd2

This past weekend was the second round of the 2014 JBRL Nitro Series at Palm Desert Raceway. The event had 180 entries including Adam Drake, Cody King, Drew Moller, Cody Smith and Jeremy Kortz. At the start of the Buggy final Drake, Moller, and King pulled away from the rest of the field. Moller then ran out of fuel trying to do minute pit stops which gave Drake a comfortable 7-8 second lead over Cody King. In the closing laps of the race King ran out of fuel giving Drake almost a full lap lead over Cody Smith. Drake went on to take the victory followed by Cody Smith in second and Cody King in third.

Click here to continue reading