Red RC

October 15, 2014

Danielsen & Johnsen win at PileCup Rd1

Brondby Racing Club near Copenhagen recently held the 1st round of the PileCup in the four classes of Touring Car Modified, Super Stock, LeMans and Formula 1. The most exciting class was the Touring Car Super Stock category with Patrick Danielsen and Jack Holger Sorensen fighting for the win. After both scored a leg win in the opening A-mains the third and last final would be the decisive one and at the end it was Patrick who held everything together to take the win from Jack Holger Sorensen and Caspar Morgen.

Click here to continue reading

October 14, 2014

Mike Gosvig wins Danish 1/8th off-road nats Rd7

The 7th and final round of the Danish 1/8th off-road nationals was held in Bramming. The purpose-built track was located within a large indoor riding arena and offered quite a low grip and one or the other tricky jump. Following Saturday’s 1/8th E-buggy race the nitro buggies would race on Sunday. The opening qualifier saw Magnus Frandsen taking the round TQ from Mike Gosvig and Henning Warner. In the second round Mike stroke back on new tyres, securing himself the TQ some 2 seconds in front of Magnus Frandsen and Pelle Culmsee. For the third round Mike changed his tactics and tried to get the maximum out of his buggy which at the end paid out as the TQ’d the round some 11 seconds from Jan D. Hansen in 2nd spot.

Click here to continue reading

October 14, 2014

JConcepts CT4.2 4mm carbon fibre rear shock tower

Made for the Centro CT4.2 conversion kit is the JConcepts 4mm carbon fibre rear shock tower that has all the necessary adjustments including the standard outer (CT4.2) camber link positions and the newly added inboard camber link holes to accommodate a narrow pivot rear suspension. The shock tower has the JConcepts touch, including a strong design and genuine carbon fibre material. The strength is added where appropriate and to allow big bore shock and transmission clearance where necessary. The tower requires the use of the JConcepts #2320 rear bulkhead.

Click here to view another photo

October 14, 2014

Reds Racing HCX horizontal carburettor

Seen for the first time during the recent IFMAR 1/8th Gas Buggy Worlds, Reds Racing now officially introduce the HCX horizontal carburettor. Featuring a differently positioned top end needle than found on conventional carbs, the main needle on the HCX is placed horizontally for easier access, improved idle stability, a more precise tuning and higher mod and top end power. The new carburettor is usable with all Reds Racing off-road engines such as the R5R, R5T Team Edition and R7 Evoke.

Click here to view more photos

October 14, 2014

MIP 5ive-T header lock wire kit

MIP introduce the Losi 5ive-T header lock wire set for Losi’s large scale truck. Including a pair of pipe screws, split lock washers, M5 safety wire nuts and 2 feet of spring wire the set helps to secure the header screws and nuts of most gasoline engines to prevent them from vibrating loose during operation. The lock wire routes through the nuts, limiting their movement once they accidentally come loose due to heat and vibrations, and although they may still move a little bit they still hold the pipe in place making sure you can complete the run without sacrificing engine performance.

Source: MIP [miponline.com]

October 14, 2014

ZZRacing Schumacher & Hot Bodies screw kits

ZZRacing have new stainless steel and titanium screw sets available for a range of Schumacher and Hot Bodies kits. Beside weight saving titanium and cooler looking silver stainless steel screws the sets also include purple colour aluminium washers and aluminium nyloc nuts and they are currently available for the Schumacher Mi5, Mi5 Evo, Cat K1, Cougar KR/KF/SV2 as well as the SupaStox kit. As for the Hot Bodies range, specific sets for the TC-FD and TCXX are available.

Source: ZZRacing [zzracing.net]

October 14, 2014

Fenix Racing quick-change multi-tool set

Italian company Fenix Racing introduce a multi-tool set featuring two quick-change tool handles and a range of metric tips. While the handles are machined from lightweight aluminium the tool tips are made from high-quality and precision-ground steel for maximised life and minimum wear. Included in the set are a total of 12 quick change tool tips in the form of 1.5mm to 3mm standard and 2mm to 3mm ball hex wrenches, 5mm to 7mm socket drivers, and 3.5mm and 4mm Phillips screw drivers. The tool set comes in a handy storage box.

Source: Fenix Racing [fenix-racing.com]

October 14, 2014

Adam Drake triples at JBRL Nitro Series Rd6

Round 6 of the JBRL Nitro Series was held at Revelation Raceway in Ontario, CA. Once again the series attracted a good amount of local talent and internationally experienced factory drivers. The event saw TLR’s Adam Drake walking away with the win in the 1/8th Expert Buggy class while Cody King (Kyosho) and Cody Smith (TLR) came in 2nd and 3rd respectively.

Click here to continue reading