Red RC

August 6, 2014

Serpent Natrix 748 200mm nitro on-road kit

Following a first teaser some time ago, Serpent now officially introduce the Natrix 748 1/10th 200mm nitro on-road car. Designed by Michael Salven and using input from Serpent’s key team drivers from around the World the 748 is the evolution step of the successful 747. The car makes use of many design features seen on the 1/8th scale Viper 977, such as the fully adjustable steering block system or the throttle linkage. The laydown steering and throttle servos are located in a 1-piece mount and as close to the centreline of the car as possible for improved handling. Also new and centrally mounted is a small radio box with the radio plate sporting a holder for the receiver battery plug that then can act as an on/off switch.

Click here to continue reading

August 6, 2014

Mack & Kremer win in Wiesbaden

Last weekend the final round of the Central German Championship took place at the WMC Wiesbaden track. In the Expert class it was a close fight for the TQ between the Shepherd drivers Oliver Mack, and Freddy Südhoff at his second outing with the Velox V8. After 4 rounds it was Oliver Mack who was on top of the time sheets with less than a second in front of Freddy Südhoff.

Click here to continue reading the report

August 6, 2014

Batlle tops first seeding practice

Robert Batlle set the pace in the opening round of seeding practice at the 1:8 Offroad European Championships in Germany, the Mugen driver fastest over 5-minutes from the Kyosho of defending Champion David Ronnefalk. Winning his second European title the last time the championships visited the Sand am Main track, the Spaniard would outpace his Swedish rival by 2.644 seconds with Team Xray’s Martin Bayer completing the Top 3 a further 1.704 off.

Continue reading this report here or view our complete event coverage here.

August 6, 2014

Mibosport Summer On-Road Cup 2014 – Report

The final race of the Mibosport Summer On-Road Cup 2014 took place at the permanent on-road track in Blansko with over 40 drivers from the Czech Republic, Slovakia and Poland in attendance. The TQ holder in the Touring Car Modified class was open till the very last qualifying session. After three sessions, David Nemcek held the prestigious TQ spot as his main rival, Radek Flek had very bad luck due to technical problems followed by a mistake of a marshal, who put another car right into Radek’s racing line, which cost him a broken suspension and a retirement from the qualifying round. Despite all those problems, Radek did not give up and he grabbed the TQ in the last qualifying session with the fastest time of 24 laps in 5:02.438.

Click here to continue reading the report

August 6, 2014

Avid acrylic touring car chassis tweak plate

Avid now have this acrylic tweak plate for touring cars available. The car will be placed on top of it, the top deck screws will be loosened and tighten back up while pressing down on the car at the top and bottom of the battery and at the servo and speedo. This will help settle the chassis and get a true setting on the top deck. This acrylic tweak plate is an alternative to other units on the market and helps to save weight while travelling or keeping weight in that wallet.

Source: Avid [avidrc.com]

August 6, 2014

Official IIC touring car spec tire announced

The International Indoor Championships announce that the official spec tire for the 10th Anniversary of the IIC will be the Gravity RC Type C. The tire comes pre-mounted on the marked Gravity RC rim, made from a blend of plastic and polycarbonate, and known to be durable and true. The part number for the tires are GRC130 G-Spec Type C and they are available from your local hobby shop or directly from the Gravity RC website.

August 6, 2014

RB micro fibre pit towel

RB have a new pit towel available made from soft micro fibre. Measuring 50x100cm and coming in grey or orange colour the pit towel is very compact when folded and not only protects your work space’s surface but it also comes in handy when cleaning parts.

Source: RB [rbproducts.com]

August 6, 2014

Serpent Viper 977 carbon fibre chassis set

Made for the World Championship winning Viper 977 car is this carbon fibre and aluminium chassis set from Serpent. Developed over the period of several month and finally available for release, the set offers a carbon fibre main chassis with aluminium inserts that control both the flex of the chassis as well as act as an engine heat sink. The chassis offers improved flex compared to the stock aluminium part for increased steering and improved overall traction, which can be beneficial in a range of track conditions. While the rear alloy insert is a mandatory part, the front insert is an option to control the overall twist of the chassis. Flanged aluminium inserts keep the parts in place without harming the carbon fibre. Equipped with both inserts the chassis is around 60g lighter than its alloy counterpart and Serpent’s readily available brass inserts allow to up the weight if needed.

Click here to view more photos