Red RC

July 11, 2014

MIP Pucks X-6 Cubed 17.5 drive system

The latest vehicle to receive MIP’s Pucks 17.5 drive system treatment is X-Factory’s X-6 Cubed buggy. The Pucks drive system is an aluminium based drivetrain system which includes aluminium diff outdrives, aluminium C-CVD bones, and replaceable plastic orange wear Pucks that take the place of the standard steel pins. This combination greatly increases the longevity of the drivetrain and most importantly decreases the drivetrain’s overall rotating mass by nearly 50 percent, making it ideal for 17.5T stock racing. The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temps. Included in the X-6 Cubed specific kit are also a ball diff set including a new thrust race and a set of blue thread gel, clear silicone and MIP grease.

Source: MIP [miponline.com]

July 11, 2014

Yokomo Europe B-Max2 & B-Max4 chassis decals

Available now from Yokomo Europe are chassis protective decals for the Yokomo B-Max4 III and B-Max2 buggy. The clear decals come printed with black graphics and they are made to prevent the chassis becoming overly scratched on abrasive track surfaces. Included in each package are two pre-cut decals.

Click here to view the other new decal

July 11, 2014

Yokomo YZ-PS25A 25 Amp power supply

Yokomo introduce the YZ-PS25A power supply for the use with 100 to 240VAC input. The device offers 12VDC and a maximum of 25A of output current, enough even for very powerful charger and tyre truers. An LC display informs about the current voltage, wattage and temperature while a separate 5V/1A USB port allows you to power your mobile devices. Due to the design of the power supply it can be directly mated with Yokomo’s YZ-110Duo charger with the help of two dual bullet-type connectors, limiting the amount of wires on your pit table for a clean and sleek look. Both the power supply and charger are also available as a combo set from mid-July.

Click here to view more photos

July 11, 2014

VP Pro 1/10th Mad Runner carpet tyres

VP Pro introduce a new line of 1/10th buggy tyres for the use on ugh grip surfaces such as astro turf, carpet and grass. The Mad Runner is available as 2WD front, 4WD front and 2WD/4WD rear tyre and it makes use of popular and widely used tread patterns, such as a cut-rib design for the 2WD front and small pins for the 4WD front tyre. The Mad Runner will become available by end of August.

Click here to view the other new tyres

July 11, 2014

Yokomo R12 C3.1 1/12th pan car kit

Yokomo introduce the latest incarnation of their 4-time JMRCA National and 2-time IFMAR World Championship winning 1/12th scale car, the R12 C3.1. The kit features the newly developed rear friction tube dampers which consist of small-sized and light weight plastic-moulded tube dampers, a system that is used up front great results for some time now. The dampers reduce roll and improve agility of the car especially on carpet surfaces while the use of thicker rear oil also helps with rear end grip on asphalt surfaces. Up front, the C3.1 inherits the proven, fully adjustable double wishbone suspension and friction dampers from the previous generation R12’s. the C3.1 will be ready for shipping by the end of July.

Click here to view more photos

July 10, 2014

Axial Yeti 1/10 4WD rock racer RTR

Axial introduce their latest 1/10th scale off-road vehicle called the Yeti. The dedicated rock racing vehicle features a solid rear axle and independent front suspension and it is built to withstand the punishment of rock racing at a high level of performance. It’s distinct aesthetic and technical elements were inspired by full-size desert trucks and various off road vehicles. The Yeti is powered by a 3150KV 4-pole brushless motor and controlled by a 3S-compatible and waterproof speed controller. In the suspension department, the off-road racer is equipped with an IFS Independent Front Suspension system to help maintain high speed stability when running through a diverse range of terrain. Precision machined aluminum shocks are standard equipment and deliver smooth suspension movement for consistent handling. The package that also includes a factory-installed steering servo is rounded out by a 2-channel 2.4GHz radio system for glitch-free operation.

Click here view the features and more photos

July 10, 2014

VBC Firebolt 2WD buggy – Body images

Following a set of first production prototype images VBC now also launch two photos of their forthcoming Firebolt 2WD buggy with its body on. The mid/mild-cab forward shell offers a sleek design with a raised rear section to make way for the mid motor, while a low-profile shark fin adds stability and improves airflow towards the large rear wing. According to VBC the buggy is available for pre-order now and the first kits will be shipped by end of July.

Click here to view another photo

July 10, 2014

New Serpent Spyder & Cobra optionals

Serpent have a range of new option parts for the Spyder and Cobra line of vehicles available. Starting with the Spyder, first up is a 21 teeth top shaft for stock racing classes. The part fits all SRX-2 series buggies and trucks and it is available separately or including an adapter.

Click here to continue reading