Red RC

November 30, 2012

Craig Collinson doubles at Chadderton

The Batley Buggy Club hosted the second round of their Chadderton winter series, held at Radclyffe Athletics Centre. With over 120 entrants, a full days’ racing was ahead of the drivers. The multi-surface track looked fantastic with a good mix of jumps, bumps, carpet and the usual cork flooring. The track was also laid out to run anti-clockwise just to mix things up a bit. As qualifying got under way it was clear to see the fast guys were all running dBoots Terrabytes tyres (A compound), as these proved to provide the most grip on the cork flooring and looked super consistent between surfaces. Just like in the first round both 2WD and 4WD classes were run on the same day, so it was all systems go for those competing in both classes. There was some great and close racing throughout the four rounds, but it was Team Durango driver Craig Collinson who was on form again, taking three out of four qualifying rounds with both his DEX410v3 and DEX210, to give him the overall TQ spot with both cars. Steve Lawson qualified second in 2WD and Conor Cocker took the second qualifier spot in 4WD, also driving a Team Durango DEX410v3.

Click here to continue reading

November 30, 2012

Yokomo R12C pan car kit

Yokomo is proud to announce the release of the R12C, an exact copy of the car Naoto Matsukura took to World Championship honors in 2012. The kit contains a weight balance optimized chassis, a new centre point steering assembly to improve the Ackermann geometry, a highly adjustable rear width to help adapt the car to different grip levels and the kit also comes with a newly designed left side rear wheel hub.

Click here to view more images

November 30, 2012

Darren Lord wins GCRC Raceway Series

GCRC Raceway, a purpose built indoor clay 1/10th race track in Australia would host a 13 round race series. Panther team driver Darren Lord took the series by storm in the 4WD Pro SC division. Eleven TQs and twelve 1st place finishes secured Darren the hard fought title.

Source: Panther [panthertires.com]

November 30, 2012

Chris Cristo wins Mod Truck at Gobbler Classic

Chris Cristo and John Cravotta dominated the modified truck class at the eighth running of the Gobbler Classic held by R/C Excitement in Fitchburg, MA with a total number of nearly 150 entries. Cristo drove the soon-to-be-released X Factory X–60CF to wins in both qualifiers and the A main, followed closely by John Cravotta with an original X–60.

Source: X Factory [xfactoryrc.com]

November 30, 2012

CRC sweep U.S Indoor Championships

The annual U.S. Indoor Championships in Cleveland is a premier road racing event for 1/12th and 1/10th pan cars and touring cars. For over 30 years, the ‘Champs’ has created many exciting finishes and fond memories. For 2012, there were big changes to the schedule and a new venue. For the first time in 25 years, racers would no longer travel to the Holiday Inn in Independence, OH, instead the new location for the race was the Holiday Inn in Strongsville, Ohio. Also new this year, no car would hit the track on Thanksgiving day, making it a shorter more affordable race.

Click here to continue reading

November 30, 2012

Spec-R touring car & M-type dish wheels

Spec-R introduce new dish wheels for 1/10th touring and M-class on-road cars. Starting with the touring car wheels they are available as standard and low-rib variant. White of colour the 24mm wheels weight 9.8g per piece and come in sets of four rims. Also new are 24mm M-class dish wheels in white colour and sets of four. Just like the touring car wheels they are available in a standard and low-rib variant.

Click here to view more photos

November 30, 2012

JConcepts 1/10th truck & buggy profiled inserts

JConcepts have released two new profiled inserts for 1/10th truck and 1/10th buggy. The insert for 1/10th racing trucks was debuted during the 2012 Cactus Classic and has been used in a testing phase throughout 2012. The material and design is very similar to the popular 1/10th buggy rear insert giving it a medium to firm feel. The new 3206-3 1/10th buggy rear insert comes on the heels of the success of the 3206-2 insert. The -3 insert as it is called, utilizes the same inner and outer cuts as the -2 but with a slightly rounder profile, the insert rounds the shape of the tire slightly which is advantageous in loose conditions with treaded tires or when using slick type tires.

View the buggy insert here

November 29, 2012

RDRP Ultra set-up board

After receiving a large amount of interest for their upcoming team driver-only aluminium set-up board, Sven and Michael from Revolution Design have decided to make it available also for the public. The Ultra Set-up Board comes in 3 cool anodized colours, black, gold and hard-anodized olive green and is 570 x 440 x 2mm. The graphic on the board is made for buggies but also fits touring cars and features lines for toe-in and easy identification of wheelbase.

Source: RDRP [revolution-rc.com]