T-Works has released aluminium and brass front bulkhead options for the Team Associated RC10B7 1:10 2WD Buggy. Available in 0 degree and +/- 2.5 degree variants, the machined aluminium bulkheads are the same as the original while the brass versions weigh a heavier 26grams and 27grams respectively for the 0 degree and +/- 2.5 degree options. This allows you to fine tune the front end weight balance of the buggy depending the track conditions.
New from 175RC is this Carbon Fibre battery hold down system for Team Associated’s RC10B7 1:10 2WD Buggy. This system features carbon straps that replace the stock plastic holders, and uses quick release urethane straps to keep your battery in place during hard cornering and landings. These straps provide a nice cushion for your battery to ride against, instead of hard plastic tabs wearing on the case, and causing your battery unnecessary stress. This system also comes with upgraded Ti-Look screws for that Factory Team look.
Having previously released them for 1:8 Buggy, VP Pro has now released their Inner Sidewall Support Adapters for 1:10 Buggy tyres. Sold as a pack of 12-pieces, by adding the inner sidewall support adaptor which is glued into place, the sidewall becomes much stiffer helping to alleviate the issue of soft rubber flex too much in high grip conditions.
Last weekend Red RC made our third trip to Manila for the world class offroad event that is the Philippine Masters. Famed as being Asia’s biggest annual 1:8 Offroad race, the Circulo Verde track is renowned for its difficulty and 3D style build with this year’s 12 edition of the race using a new method to seal the surface. This resulted in minimal tyre wear even over the 1-hour Main final in which Team Associated’s Davide Ongaro recovered from an early flame out to take his fourth win in the capital city. The first time Sparko was officially represented at the race, a great driver by Ryan Pavidis netted the American runner-up spot. Great to see the legendary Atsushi Hara back racing at the the front end. It was great to once again do a chassis focus with him, Sworkz hooking him up for the event, and it great to see the former World Champion enjoying his racing so much once again. Attracting 205 entries from 16-nations, we got the chance to photograph buggies from 9 drivers representing 7 different manufacturers as well as the TQ & winning Sworks truggy of Bulgaria visitor Plamen Petrov we will have compiled into our latest Chassis Focus Index.
Australia’s Smokem Racing has released new Caster Indicators for use when setting up your ARC A10-25 1:10 Electric Touring Car. The set if four, they make setting up and maintaining your ARC A10-25 an absolute breeze. Made from high quality 3D-printed polymer, the Caster Indicators simply slip over the A10-25’s alloy steering hubs. Designed to suit all popular setup stations, they even provide clearance over the bearing clamping cap screws.
ARC has released a new Aero bumper designed for their R8.X 1:8 Onroad series of nitro and electric power cars. The new Aero bumper surface is increased by 25% and can cover the front lower end more than old one with the main difference being the front edge extends 15.3mm further. This helps the bodyshell touch the bumper more forward and increase the steering response. Pre-marked with different thicknesses, this allows the user to cut the bumper and make more air go through the holes, more bumper hole cuts can increase steering more. The new Aero bumper is produced from the same material as the lightweight bumper and with a thinner shape it is 2g lighter than the old one.
Hobbywing has released a new waterproof version of its very popular XeRun XR10 Pro ESC called the XR10 Pro WC. Distinguished by its colour, its waterproof and dust-proof design exceeds IP67 industrial standards. Suitable for Modified and Stock competition in 1:10 onroad and 1:10 offroad it features built-in reverse polarity protection circuit, newly added smart fan start & stop function, and the maximum brake force adjustment has been expanded with it supporting 101%-150% active braking.
Team Associated is now offering its 1:14 scale Reflex 14B Kit 4WD electric buggy in kit form. Designed with performance in mind, the buggy is fully adjustable through the turnbuckles, springs, fluids, shock tower hole placement, gearing, and the included Factory Team parts making the Reflex 14B Kit perfect for any terrain you can throw at it. Additional features include three sealed differentials, aluminium steering rack, and lightweight aluminium center driveshaft. These innovations have increased the potential for grip and corner speed, which leads to faster lap times and an overall thrilling-to-drive feel.
View features & more images here
