Red RC

November 18, 2011

Yeah Racing Infrared Thermometer

The Yeah Racing infrared thermometer is designed for contact-less measuring of temperatures between -50°C and +260°C (-58°F/+500°F). Sporting compact dimensions of 95x45x28mm and a weight of 65g the device is a handy tool for everyone who want to measure battery, motor or engine temperatures to check for the correct gear ratio, speedo setup or carburettor setting. The thermometer sports a black case with a large easy to read display, orange buttons, and an orange cord.

Source: Yeah Racing [yeahracing.com]

November 18, 2011

LRP ZR.32 Spec.2 pull start engine

Team Associated introduce the LRP ZR.32 Spec.2 pull start nitro engine. Equipped with an especially reinforced heavy-duty XTEC T6 engine housing the 5.24cc engine is designed for the use in 1/8 scale off-road buggies, truggies and monster trucks. It is equipped with its smaller brother’s carburetor with 9mm insert and a 5+1 port liner. The big block engine fits in all .21 engine mounts and sports a heavy-duty pull start especially developed for large displacement engines.

Source: Associated [rc10.com]

November 18, 2011

Reflex Racing TC6 carbon rear bumper

Reflex Racing introduce the RSD carbon fibre rear bumper for the Team Associated TC6 touring car. Designed to eliminate the chance of body tucks when racing. Made from 2.5mm carbon material the part is strong yet light of weight the bumper is designed to be used with rear TC6 body posts horizontally, front body posts vertically, or with no posts at all. The part will become available by beginning of December.

Click here to view a picture of the bumper in place

November 18, 2011

Sweep Racing V3 buggy wheel

Sweep Racing are pleased to announce the release of the V3 Dish wheel for 1/8 scale buggies. Sporting a weight of 34 gram at a diameter of 83mm the wheels are both strong and light. Although very light, they are also exceptionally strong and measure the maximum diameter of 83mm. They also feature ten ribs to provide a rigid structure to prevent excessive flex and create a very true running wheel. The gluing beads have a sand paper like finish to improve bonding performance with the tires without additional preparation. An additional glue path on the gluing beads keep the glue from overflowing out of the bead and prevents an overflow into the insert.

Click here to view another picture

November 17, 2011

JConcepts Mono buggy wheels, 12mm hex adaptors & RC8.2e Punisher body

JConcepts introduce the Mono 1/10 scale buggy wheels and RC8.2e Punisher body shell. The new Mono dish disc wheels are available for the TLR/Losi 22 and Kyosho RB5 and Team Associated B4.1/B44.1 when equipped with 12mm hex wheel hubs. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. Designed and manufactured to ensure trueness and durability the Mono wheels are available in white and yellow colour in sets of four rims.

Click here to continue reading and to see the other new parts

November 17, 2011

Kevin Lee joins Kyosho

Kyosho are very proud to announce UK top driver Kevin Lee as their new team driver. He will be running the new Lazer FS2 SP in 4WD and will continue with the Kyosho based Vega mid-motor buggy in 2WD. As well as winning many Nationals, Kevin is a multi European A finalist and his skills and knowledge will be a big asset to Team Kyosho. This is what Kevin had to say about the deal:

“I’ve always been a big Kyosho fan, ever since running the original Lazer ZX a long time ago as a teenager. After running the Vega RB5 SP2 in 2011, I have been converted back, and now can’t wait to start running the Kyosho Lazer once again (some 20 years on..). It’s an honour to be able to represent one of the most respected RC manufacturers in the world, and I hope to be able to contribute to the results of an already successful race team”.

Source: Kyosho Europe [kyoshoeurope.com]

November 17, 2011

Hudy offset throttle servo horns

Hudy introduce the offset throttle servo horns made from CNC-machined aluminium. Offering more durability and precision than composite plastic items the servo horns sport a total of four pre-drilled holes with tapered M3 threads for easy linkage mounting and a strong connection of horn and linkage. Available in three different variants for all popular servo brands including KO Propo, Sanwa, Hitec and Futaba.

Source: Hudy [hudy.net]

November 17, 2011

X Factory Tire Mounting Cleaner

X Factory release the tire mounting cleaner, a specially formulated chemical to remove mould release, oil, grease or general dirt from both the tyre and wheel’s bead in order to provide a perfect underground for gluing tyre and wheels. The cleaner evaporates quickly leaving no residue for a swift workflow.

Source: X Factory [xfactoryrc.com]