Red RC

October 20, 2010

IDM Factory tuned engines & new tire range

Daniele Ielasi was in contact with us to tell us about his new IDM product releases including an update to his line of .21 and .12 engines. The new individually numbered special edition versions of the Evo4 motor are Factory tuned and feature extra internal tuning for extra performance. IDM have also released their new tire & wheels with the rims featuring carbon fibre inside the material for increased hardness so that the wheel always stays constant even in extremely hot conditions. Available for 1/8th and 1/10th scale cars, they come in the usual range of shores.

View the tire range here

October 20, 2010

LRP ‘Boost 0’ speed control proposal

LRP have announced that they are sending a rule proposal for ‘Boost 0 speed controls’ to all the important RC federations to help create a new standard for this setting in all ESCs. As there was no exact definition of ‘Boost 0’, the drivers couldn’t be sure that the ‘Boost 0’ speed controls from the different manufacturers were on the same performance level. With the LRP rule proposal, the definite technical meaning of ‘Boost 0’ is now clearly defined for the very first time. Other manufacturers also get a firm base to ensure that ‘Boost 0’ speed controls of different manufacturers can be allowed in one class, because they are based on the same preconditions. Speed controllers eligible for ‘Boost 0’ classes must provide zero timing advance, along with disabling advanced motor control functions (i.e. Boost, Cheat Mode, Turbo, etc). When the ‘Boost 0’ profile is enabled, it shall be indicated by a blinking LED while the ESC is armed and in neutral position. The commutation sequence is limited to ‘6-step’ type and commutation of the speed control must follow the motors hall sensor signals 1:1, e.g. no shifted timing (no matter if advanced or retarded) is allowed at any RPM.

Source: LRP [lrp.cc]

October 20, 2010

HoBao 1/8th offroad tire inserts

HoBao have released 3 new molded foam inserts for off-road racers. Available in 3 different compounds the black (firm) insert is ideal for maximising control as the extra firmness allows the tyre to maintain its shape. This in turn means the tyre has increased traction and maneuverability. The grey (medium) compound is better suited for tracks which include jumps. There is more ‘give’ in the insert allowing it to soak up more of the impact when landing. For the best of both worlds you can always go for the more professional dual compound. While more expensive than the other single colour inserts, the dual insert has hardened shoulders with a softer strip in the middle. This means you get the added traction of the black insert with the improved dampening of the grey insert.

Source: CML [cmldistribution.co.uk]

October 20, 2010

Tresrey DEX410 aluminium servo saver crank

New from Tresrey, is this high precision machined aluminium servo saver crank for the Team Durango DEX410/R. This part helps resolve one of the only few weak points of the car and is a perfect replacement with standard plastic crank. Easy to install, Made in Japan, it will be available on late October.

View the part mounted here

October 20, 2010

Speed Power Esprit range of chargers

Speed Power have released their new Esprit series of chargers. First up is the DC A2 Lithium battery balance charger that has a charge current of 0.1 to 3.5A and can handle up to 4 cells. Capable of charging LiPo, LiIon and LiFe batteries, it has a simple operation with information being shown on the LCD display which includes voltage, current, capacity, charging time and battery type. Speed Power also offer the B1 basic charger which takes AC power and has a max charging current of 3 x 650mA and can handle up to 3 cells. You can check out these new Speed Power products along with the Speed Passion and East Coast ranges at this weekend’s iHobby show in Rosemont Illinois at booth 1908.

View the B1 charger here

October 20, 2010

Arrowmax power tool tips

Continuing to grow their tool series, Arrowmax now offers a new range of power tool tips for electric screw drivers. Available in most popular sizes and tips, they are made of a very durable and long life spring steel material. The set includes 1.5mm, 2.0mm, 2.5mm & 3.0mm Allen, 0.63″, 0.78″ and 0.93″ Allen as well as a 3mm, 4mm and 5.8mm Phillips tips.

Source: Free Max [freemaxmp.com]

October 20, 2010

KO Propo RSx servo series

KO Propo have released their new RSx (Racing Servo) series of servos. These new servos are the result of two years of R&D for both on-road and off-road. The new servo line features all new materials for increased strength and new programming to take advantage of today’s current technology.

View the full details here

October 20, 2010

Xray NT1 aluminium belt pulleys

Xray have released this new range of aluminium belt pulleys for the NT1. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, they have been hard coated for extra durability and long life and all have been strategically lightened. Rotating mass is reduced without sacrificing strength or durability. Available for the 2-Speed belt 20T pulley, 2-Speed side 18T pulley, Mid center 19t Pulley and for the Mid side 25T & 26T.

Source: Xray [teamxray.com]