Factory Team has produced this durable and high-performance steering rack upgrade for the RC10B6.4 buggy line. Machined from billet aluminium, the new design utilises a clamping “crush tube” style ball bearing pivot that minimises play in the steering assembly. The result is a more durable and reactive steering assembly that will allow drivers to tune the steering system responsiveness.
German nitro onroad manufacturer Team Shepherd has introduced some new options parts for the Shepherd Velox V8.2 rear suspension. The new aluminium parts make it possible to use the eccentric inserts from the front of the car to adjust the position of the rear upper wishbone pin as needed. The upper/outer position is the same as the upper position of the standard parts while the inner ones increase the length of the upper arm. The set comes with all necessary hardware.
The US Carpet Off Road Championships has announced the spec tyre suppliers for this year’s running of the Cleveland, Ohio, based race. Started in 2021, the week after the legendary US Indoor Champs On Road race, the 2nd edition takes place on December 1-4 with world famous announcer Scotty Ernst in charge of proceedings. While the USCOC event has open tyre classes, for its Spec tyre classes Ernst is proud to announce their partnership with Schumacher and JConcepts. Buggy classes will use Schumacher Tires with the Truck classes running on JConcepts. For 2WD it is the Cut Stagger front and Cactus rear that will be used while 4WD uses the Cactus Fusion 2 front and Cactus rear. In Truck classes it is a Swaggers and Pin Downs combination for both Short Course and Truck.
Source: USCOC [carpetoffroad.com]
R1 Wurks have released some more new option parts for their DC1 drag racing platform. The American brand has added new front and rear arms as part of the ‘Tuned’ line for the DC1. The arms are each 3 grams lighter while maintaining the same durability as the standard kit arms. Also added to the ‘Tuned’ line is their latest front bumper design. The injection molded piece is machined out in house to help reduce weight over the front end of the car. Coming in at 48 grams it is 10 grams lighter compared to the kit front bumper.
Italian company WRC Racing has introduced their new STX.8 1:10 Electric Touring Car. Coming over 2 and half years after its predecessor, the STX.7, the key features of the latest incarnation of their STX series are a new differential system for better rotation on high traction surfaces, a new steering system, a low rear body mount and other details to lower car’s overall centre of gravity.
Klinik RC has through its Racetec brand released this nitro engine compression gauge. The digital gauge makes checking the health of your engines a breeze. Check the health of your engines in or out of the car quickly and easily, document your engines wear and find potential problems with reliability or performance in seconds. Compression is a basic test of any engine from the car you drive to atv’s and now in RC engines. The compression gauge will fit any RC engine with a turbo style glow plug. The gauge requires 2x AAA batteries.
Source: Klinik RC [klinikrc.com]
JConcepts has released the Mono wheel that is now available for the RC10 Classic vehicle in era correct 1.9” diameter. The popular dish style wheel is now available for the RC10 Classic. JConcepts has identified all the key points of the 1.9” diameter wheels and positioned them so racers can now have popular Mono flair built for the classic design. The base style of the Mono wheel revolves around the time-tested dish look which has been around since the beginning of RC Racing, but, this time, designed to fit the legendary RC10 vehicle. The JConcepts wheel is built in an extremely durable material with a racing look that combines the winning combination of racing from yesteryear, and competition of today. The Mono front wheel accepts the 3/16” x 5/16” flanged bearing or bushing found on the original and Classic RC10. Available in white, black, and florescent yellow colour with a shiny face appearance.
Source: JConcepts [jconcepts.net]
JConcepts has introduced new 3.5mm Fin turnbuckle sets designed specifically for style, durability, and performance. The base of the design is centred around a .143” titanium hex size which gradually tapers down into a 3.5mm thread base design which accepts the new Team Associated #92308 ball cups. The focus of the styling surrounds the lengthened adjustment hex area and the “finned” cuts that rotate about the centre. The Fin turnbuckles are lightweight, and the original design brings out the glamour and quality that makes titanium one of the most sought-after exotic materials in the world. The JConcepts turnbuckles are produced with left- and right-hand threads with the left being conveniently marked for easy orientation. The turnbuckle sets are available in two colours, stealth black and burnt blue with the latter having intentional sporadic colouring ranging all around the blue spectrum.
