September 24, 2009

KM Racing NT1 & MTX-4 Copper Battery tray

KM Racing NT1 & MTX-4 Brass Battery tray

In addition to the version released earlier for the Kyosho V-One RRR, KM Racing have come out with these new battery trays for the Xray NT1 and Mugen MTX-4. Made from brass, the tray brings weight to the lowest and most central point on the car, which not only helps increase chassis rigidity but also helps stop the car from traction rolling in high grip conditions. Machined with 2 grooves for tape to mount the battery, it sports the KM Racing logo engraved on the bottom.

Source: KM Racing [km-rc.com]


September 23, 2009

Alienpower Raptor 8BB RTR brushless buggy

Alienpower Raptor 8BB RTR brushless buggy

Alienpower have announced the release of their new Raptor 8BB RTR brushless buggy. This 1/8th scale chassis features a newly designed C-hub steering system that has the king pin axis extend to the wheel center which claims to improve steering performance. There is also a newly developed suspension system with twin adjustable rear suspension modes for flexible driving mode & smooth driving mode, while the car’s narrow solid aluminium chassis has a centralized design for quicker steering and faster response. Supplied with 16mm big bore shocks, the car has a an optional mechanical brake for accurate braking and better control in the air.

Click here for more photos of the car


September 23, 2009

Team Epic 12.5mm Duo & Duo2 Rotor

Team Epic 12.5mm Duo & Duo2 Rotor

New from Team Epic is this larger 12.5mm diameter rotor for the DUO2 and DUO ROAR 10.5, 13.5, 17.5 & 21.5 spec motors. The new size rotor helps increases low end power for short tight tracks or heavy 4wd vehicles. Meets all ROAR dimensional specs.

Source: Team Epic [teamepiconline.com]


September 23, 2009

European Pan Series – Announcement

European Pan Series - Announcement

The organisers of the Xceed backed European Pan Series, Markus Mobers from Germany & Vesa Yli from Finland, were in contact to announce their new 1/12th scale series. Created to promote racing with pan type cars, this series hopes to allow this category grow bigger and stronger and is a response to the growing popularity of the 1/12 scale class together with its bigger brother World GT. The 2009/10 EPS series kicks of in Germany in October (2-4), before moving to Belgium in November for round 2 and finally to Holland for the season finale in January 2010. Entry is currently open and you can find more information about the series by visiting the official site here.


September 23, 2009

Stockman & Vekemans take final Belgian National

Stockman & Vekemans take final Belgian National

The final race of the Belgian Electro season was held at the beautiful ‘De Baanbrekers’ track in Rucphen. In the EFRA class the Champion Olivier Bultynck had already been crowned last race but everything was still possible for the third place. Following qualification, it was Nick Joosens who took the pole in front of Thomas Stockman and on third place Olivier Bultynck. The first final saw a very nice battle between the three first drivers on the grid, Nick Joosens was very fast on this nice track and took the win in front of Olivier Bultynck and Thomas Stockman. In the second final it was Thomas Stockman who attacked very strong on leader Nick Joosens and could take the lead after Nick made a mistake. Meanwhile it was Manuel Henriet who took second place in front of Olivier Bultynck. The third final would be a hard battle, everything was still open and from the start it was again Thomas Stockman who attacked Nick Joosens and took the lead in front of Olivier Bultynck with Nick dropping back to third spot. Thomas Stockman would hold on for the win and Nick Joosens recovering to second in front of Olivier Bultynck. Thomas Stockman became the overall winner, TQ Nick Joosens was second and the new Champion 2009 Olivier Bultynck took the third step on the podium.

Continue reading the report here


September 23, 2009

Xray 30g Brass Chassis Weight for NT1

Xray 30g Brass Chassis Weight for NT1

Seen for the first time on the car of Martin Hudy back at the European Championships in Gubbio, Italy, Xray have finally released this high-quality, CNC-machined 30g brass chassis weight for the NT1. Made to fit in the lowest part of the chassis center line, to get the best possible balance of the car, it has been black coated for a modern look and comes supplied with mounting screws. Fits both standard 3mm and optional 4mm chassis.

Click here to see the weight mounted


September 23, 2009

Much More 5200mAh 7.4V 40C LiPo pack

Much More 5200mAh 7.4V 40C LiPo pack

Much More have released their new 5200mAh hard case competition LiPo pack. The 7.4V 40C pack is your standard affair which comes in an impact-resistant carbon patterned hard case that has low height euro connectors as well as 2mm balancing plug and is supplied with the relevant connectors. High-performance lithium polymer (LiPo) technology has been engineered for 1/10 scale applications and its high-output rating provides enough extreme power for the most demanding levels of competition.

Source: Much More [much-more.co.kr]


September 23, 2009

Marco Zambon wins 2009 Italian UISP title

Marco Zambon wins 2009 Italian UISP title

Team Durango have announced that their new DEX410 has won the Italian UISP 2009 Championship. In the final round of the series, their team took the top 4 positions in the final, with Marco Zambon winning ahead of Francesco Martini, Davide Carbone and Andrea Nerone. This result was enough to give the car the overall title with Zambon taking the Championship ahead of team mates Andrea Nerone and Davide Carbone who completed the top 3.

Source: Durango [team-durango.com]


Tonisport
Mibosport
LC Racing
VP Racing
T-Works