Red RC

March 26, 2008

Reedy EU Spec IB4600 cells

Reedy have released their new EU Spec IB4600, meeting the shorter length specification of 43mm, which have been treated and matched using the Reedy VMX Concept. This process makes these cells even better by applying an intense energy pulse to new IB4600 EU Spec NiMH cells using high-tech equipment designed in house by their engineering staff. The end results of this exclusive process are reduced internal resistance, increased voltage output, and more power. These enhanced cells are cycled then power-matched using a 35-amp discharge a process that eliminates weak cells and those that do not fall within the exclusive percentage that are good enough to be hand selected as Reedy VMX R-46 grade. Available in 5 or 6 cell sets.

Source: Reedy [rc10.com]

March 26, 2008

Hot Bodies 12th wheels & Ceramic balls

Hot Bodies 1/12th wheels & Ceramic balls

Hot Bodies have released a number of general items beginning with these 1/12th scale dished wheels for both the front and rear of most 1/12th scale chassis’. High quality and running true, the rear wheels fit most 3-hole rear axles, while the front wheels fit most 1/12th scale front axles. Also for 1/12th scale chassis’ but working in any ball diff that accepts 3mm balls is this set of 12 ceramic diff balls. Enabling you to build the smoothest differentials possible, they allow a much smoother action than steel or carbide diff balls.

Click more to see the other parts… content

March 26, 2008

Much More Long type end bars

More new products from Much More with the release of the premium long type end bars for 5-cell battery configurations. Available in gold or silver, in packs of 10, they allow easier access than standard short versions which will also prevents damage to your battery tube.

Click more to see them in action… content

March 26, 2008

Duthie & Burrows win NZ Nationals

Last weekend, Taranaki in New Zealand played host to the country’s gas Nationals for both 1/8th and 1/10th scale. The 1/8th scale class saw the TQ spot go to Mugen racer Andy Ando, but problems in the final meant he could only finish in 6th, leaving the win go to his team mate Luke Duthie, with fellow Mugen racers Andrew Kirk and Selwyn Duthie in 2nd and 3rd, all on the same lap. In 1/10th scale it was Daniel Burrows that started from the pole position and could take the win by 1 lap in front of Mugen team mates Scott Robinson in 2nd and Jayden Duthie in 3rd spot, 3 laps further back.

Click more to see the 1/10th podium… content

March 26, 2008

Much More V-Made instant glue

Much More have released this V-Made instant glue which has been specially developed for 1/8th scale buggy ot truggy tires. It provides better adhesive strength than any other type and instant glues and is also a great choice for touring car rubber tires as well.

Source: Much More [much-more.co.kr]

March 25, 2008

Team Orion 11.1V Graphite Edition 3200

Team Orion have announced the impending release of their Graphite Edition 3200mAh 3 cell 11.1 volt hard cased LiPo pack. Three cells were used to push your vehicle to its limit, and maybe even beyond that, during testing it was too much for most slipper clutches and diffs to handle. Instantly adding 50% more power to your machine while still being able to fit into most vehicles without the need for chassis adjustment your biggest issue is finding a street big enough to handle the blistering speed.

Source: Team Orion [teamorion.com]

March 25, 2008

Team Azarashi Tinted buggy wing

Japanese manufacturer Team Azarashi have introduced an updated version of their popular, high downforce wing. The new type features a smoked colour as standard, something that is apparently very popular these days, saving you the need to paint the wing. Made from high quality lexan the wing set is sold with 1 straight type and 1 round type.

Source: Team Azarashi [team-azarashi.com]

March 25, 2008

JConcepts Goose Bumps 1/10th Tires

JConcepts have released the Goose Bumps tire for use on a variety of 1/10th scale chassis’. The totally unique step pin and bar lug design combined with sticky compounds like green allow even greater control on slightly loamy and wet conditions. A special breed, they have been designed for maximum performance when new or used as the design allows even wear all the way down to the tire body. Once the driver wears through the initial pin, a bar follows to maximize potential on aggressive surfaces. Incorporating a compact tire body with a crisp tread pattern with precise separation for intense racing competition, in new condition they excel on soft surfaces with either dry or wet conditions, while worn versions excel on indoor or outdoor clay tracks where a slight groove has formed. Supplied with firm And-1 foam inserts they are available for 2.2” buggy rear wheel, 2.2” 4wd front wheel and 2.2” truck wheel

Click here to see the other tires… content