Red RC

December 3, 2021

Exotek F1 Ultra Pro front sway bar & damper tubes

Exotek Racing have introduced two new front end options for their F1 Ultra chassis. The first is a pro style front sway bar set which comes with 3 sway bar weights included (soft, medium, hard) so that you can tune for track conditions. The set also includes ball bearing supported mount that attaches to most standard F104 type wings such as Montech, Tamiya, Protoform etc. The mount also has cantering screws to insure it stays centred on the wing and the sway bar’s tension can be adjusted for proper left right balance with the quick tension adjust ball cup design included. Also new is the lightweight damper tubes for the F1 to minimise bumpy asphalt track conditions. Extra lightweight and positioned for low centre of gravity and tucked away to avoid frontal impacts for more durability the set includes machined POM barrels and alloy tubes with included steel ball ends.

View more images of the new options here

December 3, 2021

T-Works X4 caster bushings

T-Works have produced a range of caster bushings for the new Xray X4. The bushings are machined from aluminium and black anodised, with 3 different versions available offering 6 alternative settings. The 1 dot offers 2.5, 3.5 & 5.0 degrees, the 2 dot version 1.5, 4.0 & 4.5 degrees and the 3 dot version 0.5, 3 & 5.5 degrees.

View the other bushings here

December 3, 2021

Power HD S15-X servo for X4

Having recently released a specific MTC2 servo, Power HD has today announced the release of their Xray X4 specific servo called the S15-X. With the integrated mount and reverse receiver wire output, this S15-X could perfectly mount to the X4 directly. Having lower gravity centre and neater wiring, S15-X is superior in performance to the PGB-S15, and can be programmed with the Power HD program box to set your favourite parameters according to different tracks.

View more details of the S15-X here

December 2, 2021

PowerStar PM-1805 low profile digital servo

PowerStar have introduced their new waterproof low profile IP65 waterproof digital servo, the PM-1805. Sporting a precision machined aluminium housing with built in heat sink, internally it sports a high efficiency brushless motor, double ball bearings and stainless steel teeth. All of these features combined proved a stable performance and strong explosive force for 1/12th and 1/10th applications.

View more details of the PM-1805 here

December 2, 2021

Antonia Kovalszki joins SWorkz junior factory team

SWorkz have announced the signing of top young Austrian driver Antonia Kovalszki to their junior factory team. She will run SWorkz 1/10 and 1/8 cars in the next years. On the deal, Sworkz’ team manager Max Sonnleitner said ‘I am extremely happy that Antonia has chosen SWorkz for her future home. For sure she is one of the greatest female talents in RC.’

Source: MW RC Cars [mwrccars.at]

December 2, 2021

JConcepts Regulator brass option parts

JConcepts have introduced a bunch of new brass options for their Regulator MT chassis conversion. First up is a stackable chassis weight, the machined brass unit can be easily added to the bottom of the chassis to increase weight to one of the lowest locations on the vehicle. The design allows the ability to stack additional weights if necessary to the same footprint with (not included) hardware. Weight added to the chassis area on a retro monster truck can improve suspension performance by increasing the sprung weight. This allows for better jump handling and landing and the ability to plant the tires into the racing surface via front to rear weight transfer.

View the other new options here

December 1, 2021

BRCA British GP 2021 – Report

The BRCA 1/12th section British Grand Prix was held recently in Eastbourne. The event was a celebration of return to racing following the disruption caused by the COVID pandemic. The Grand Prix was a different format to typical national meetings and had two classes, LMP12 and GT12 racing at the same event over two days. Saturday would see controlled practise and four rounds of qualifying before a further two rounds of qualifying and three finals for all drivers on the Sunday. An entry of 44 LMP12 drivers and 25 GT12 drivers gave a great atmosphere and competitive racing throughout the field. The Eastbourne club laid out a large track using the carpet which had been previously run at the 2020 World Championships. A large technical track provided a challenge for the drivers and the extra space allowed for great racing.

Continue reading the report here

December 1, 2021

Donathen RC charge leads with QS8 connector

Donathen RC now have a line of charge leads featuring the QS8 connector. The QS8 connector is the choice for many drag race champions and features Anti-Spark technology, and can handle extremely high amp draw and voltage requirements. The connector can handle 110 amp continuous and 300 amp peak, features 8mm gold plated connector for extremely low resistance and has a stealthy black colour with red lettering.

Source: Donathen RC [drcproshop.com]