Red RC

December 18, 2021

Tanner Denney joins SWorkz factory team

SWorkz have announced that top US racer Tanner Denney is joining their team for the next years. Tanner will race SWorkz cars in 1/8 and 1/10 offroad. He had this to say ‘I would like to thank Max and Georg at SWorkz for the incredible opportunity, and the warm welcome. The future that they have planned is unmatched and I can’t wait for what is to come. To all my fellow SWorkz teammates and customers – Let’s gooo! See everyone at the races in 2022!’

Source: MW RC Cars [mwrccars.at]

December 17, 2021

Zuykov 1/10 TC setup station

Zuykov, new brand of Russian TC driver Denis Zuykov have released amongst other things, this TC setup station. The idea behind this product is that the kit contains everything you need to set up your car including camber, caster, toe, EPA, droop and ride height. The scale for the camber setting is not at the bottom as usual, but at the top of the setup wheel. This scale is closer to the eyes and its location is much more convenient. Each setup wheel uses 2 bearings for a smooth movement and a scale at the top allows for minimal movement of the bottom over the setup board, greatly increasing accuracy. The top plate can be used on cars up to 210mm wide, adjustable from 40mm out to 40mm in. For owners of Awesomatix A800 the kit includes measuring caster blocks. Thanks to the scale on the side of the setup wheel, the caster and camber can be adjusted simultaneously without the need for a calipers. To change the length of the turnbuckle, there is a 3mm and 4mm wrench in the box.

View more details & images of the setup station here

December 17, 2021

Infinity IF18-2 lay down shock stays & flat tip set screws

Creation Model have released this pair of LD lay down front shock stays for the IF18-2. Made with 2.5mm thick carbon fibre and available in standard and wide versions, the LD stay offers a position one step lower than the conventional tower that is included in the kit while the centre position is the same as the lower hole. It’s designed to be lower so that it does not interfere with the body even when a modern body is installed. Also from Creation Model is this M5x4mm set screw with flat tip which is ideal for fixing the GP car muffler to the muffler stay.

View the other new items here

December 17, 2021

Ginting takes Pro Stock at Indonesian EIC 2021

The annual Indonesian Electric Indoor Cup 2021 was held at Graha Tamiya Circuit, Tangerang. Within 40 entries which participated at TC Pro Stock Class, Mini Class and Front Wheel Class. In the Pro Stock class it was Muhammad Izzah who started from pole followed by Bowie Ginting and Ridhwan Suteja. Bowie would go on to take A1 and A2 to secure the overall win, while A3 went to Ridhwan, securing him 2nd while pole-sitter Izzah ended the race in 3rd.

View the complete PS results here

December 17, 2021

T-Works titanium adjustable camber screws

These new adjustable camber screws from T-Works have been machined from high quality titanium. Lightweight and strong they come in two different versions, 4x15mm and 4x18mm, and are sold in pairs. The ends accommodate a 2mm hex driver.

Source: T-Works [rc-tworks.com]

December 17, 2021

Pro-Line 1973 GMC Sierra 3500 Dually clear body

Introducing the 1973 GMC Sierra 3500 Dually Clear Body for 12.3″ crawlers from Pro-Line. Now you have a crawler body specifically made for dually rear wheels like Pro-Line’s Carbine wheels. The Sierra 1 ton dually is an iconic truck for pulling trailers, campers, or anything you can imagine and now you can recreate your dream rig on your 12.3″ crawler. This body is fully licensed by GMC and has all the details you expect including the extra-wide rear fenders to fit dually rear tires. This body comes clear and includes detailed decals, window masks, and overspray film so you can fully customise the look of your truck.

View more images of the GMC Sierra 3500 here

December 16, 2021

Pro-Line Cliffhanger body for SCX24

From Pro-Line, their new Cliffhanger body for the SCX24. Just like the larger Cliffhanger for 12.3″ crawlers, this mini-Cliffhanger features a pinched front end and a dove-tailed rear end for maximum tire clearance while still maintaining a true-to-scale appearance. It is made from a single piece of crystal-clear polycarbonate to save on weight and has a moulded-in drop-down bed to make room for you to add your favourite tiny scale accessories. Everything on the Cliffhanger body has been optimised for maximum crawling performance for your SCX24. This body also includes optional headlight buckets for added scale appearance.

View more images of the Cliffhanger here

December 16, 2021

Pro-Line Axis T Bruggy Edition race body

Introducing the Axis T Bruggy Edition race body for 1:8 Truck, a clean-sheet design from Pro-Line bringing a fresh new look to the class. Designed with the latest in CAD technology, the Axis T features an ultra-low-slung design with sharp lines throughout giving it an unmistakable look on the track. The Axis is a cab-forward design that provides enhanced steering response while the side ridges balance out the rear of the car with the ideal side-bite. The rear of the Axis body has the right amount of clearance for the motor and electronics and fits behind the front shock tower of your race truck. Proudly Made in the USA, the Axis is made from durable polycarbonate material that will give you an edge over the competition. Paint-then-peel overspray film, window masks, and Pro-Line decals are included with the body. Hit the track in fresh, Pro-Line style with the Axis race body.

View more images of the Axis T body here