Red RC

November 10, 2020

JConcepts RC10 Mono wheels

JConcepts supports the vintage RC enthusiast with the release of new Mono wheels. The original offset front and rear wheels for the RC10, RC10B2 and RC10B3 have been highly sought-after for years by drivers looking to outfit a restoration project or racers actively racing their vehicles. The 2.2” Mono wheels are inspired by the originals, feature the iconic dish shape with the rear wheels utilising the pin drive setup for 3/16” axles while the fronts accept a non-flanged 3/16 x 3/8” bearing. JConcepts has taken the liberty of increasing the wheel width to the inside in order to accommodate today’s race tires. The wheels include a vent hole on the outer diameter and an added outer “catch” to reduce the ability for glue to run down the face of the wheel during application and curing. Mono wheels are available in bright white and fluorescent racing yellow and packaged 4 pieces per pack.

View the Mono front wheels here

November 10, 2020

T-Works adjustable clamping servo horns

T-Works have introduced their new adjustable clamping servo horns. Available in two different versions, standard and +5 as well as for both 23T and 25T splines, the new horn features an insert to precisely locate the lever mounting hole. Between the two inserts there is a range of mounting position from 17mm to 20mm from the pivot point and with both the insert and servo arm made from high quality aluminium, as well as the use of a clamping screw, the entire arm assembly is rock solid.

View the other servo horn type here

November 9, 2020

Yokomo YD-2 hybrid front shock tower

Coming from Yokomo is this new hybrid front shock tower that fits all YD-2 series cars. The upper shock tower has been made from 3mm thick graphite to ensure rigidity and light weight, while the upper arm holder is machined from aluminium to increase rigidity and accuracy. The set is available in three anodised colours, black, red or purple to match the other available optional aluminium parts and together, the lighter weight and lower centre of gravity improves the performance and suspension response stability as well as looking great.

Source: Yokomo [teamyokomo.com]

November 9, 2020

LC Racing LE lightweight pit mat

New from LC Racing to commemorate their 7th Anniversary, comes a limited edition lightweight pit mat. The mat measures 100x50cm and with a thickness of 1.5mm, it is made from a special durable fabric that will stand up to regular usage while looking new for an extended period of time. The pit mat is made of black material and it features LC Racing along with the outline of their LC10 B5 4wd buggy.

Source: LC Racing [lcracing.net]

November 9, 2020

Infinity small parts storage box

Adding to their previously announced line up of parts boxes & storage cases, Creation Model have released their latest Infinity plastic case for storing and managing small parts such as shims and washers. Containing 7 small cases (76 x 24 x 17mm) with each featuring 3 compartments, storing the recently released Infinity shim set is a perfect use for these containers and can be easily identified if used together with their supplied identification label sticker. The case’s external dimensions are approximately 86 x 179 x 20mm.

View another image of the case here

November 9, 2020

Cavalieri, Tebo & Maifield take Pro classes at AMS 11.0

The 2020 Alabama Manufacturers Shootout presented by Racetime Entertainment took place last weekend in Cullman, Alabama. In the Pro Buggy class it was Mugen’s Ryan Maifield that claimed the top spot in qualifying but in the 45 minute final, following a thrilling battle with Sworkz’ Ryan Cavalieri it was Cav who would take the victory by less than a second in front of his long time rival. Jared Tebo (Tekno) would complete the top 3 less than a lap back, with Cole Ogden (HB Racing) and Brandon Rose (Agama) rounding out the top 5. Pro Truggy saw a dominant performance by Tekno’s Jared Tebo to take a clear win from the pole position ahead of the impressive Tyler Jones (Agama), with Spencer Rivkin a few seconds back in 3rd. Daktah Phend (TLR) and Joe Bornhorst (Tekno) would complete the top 5. In Pro eBuggy, Ryan Maifield took his Mugen to the TQ spot in qualifying, edging out Dakotah Phend on a tie break, with Tyler Jones starting 3rd. The double leg finals saw Maifield win both to take the overall with Cavalieri coming through to take the runner up spot ahead of Jones in 3rd, Phend in 4th and Rivkin in 5th.

View the other Pro podiums here

November 9, 2020

T-Works 3.5mm turnbuckle wrench

This new turnbuckle wrench from T-Works has been made from black hard coated spring steel. Suitable for turnbuckle knuckles of 3.5mm, its size allows it to get into tight spots to make quick and precise adjustments.

Source: T-Works [rc-tworks.com]

November 9, 2020

STRC Limitless rear wing support & bellcrank plate

ST Racing Concepts have produced two new items for the Arrma Limitless with their new graphite high-downforce rear wing support and graphite steering bellcrank plate. The high-quality rear wing support with its CNC machined aluminium cross member provides the ultimate aero dynamic package for the rear wing of your Limitless. This package will drastically reduce any vibration and flex of the rear wing and support the wing for maximum rear traction during those insane high-speed runs. Available in red, gun metal and silver. The graphite steering bellcrank upper plate for the Outcast and Infraction/Limitless tightens up the precision of the steering bellcrank system and adds great factory looks to your Arrma vehicle.

View the bellcrank upper plate here