Red RC » P On Road

December 20, 2023

MonacoRC Bag Small V2.1

MonacoRC has extended its line of bags designed for the transportation of materials for the RC racers. The new MonacoRC Bag Small V2.1 stands out for its attention to detail with the interior adorned with an elegant print featuring the MonacoRC logo in tone-on-tone red, enhancing the quality of the finish. In addition to the practical tone-on-tone red mesh inner pocket (for the Black and Red version), the exterior is enriched with a MonacoRC label, maintaining that elegant simplicity that has made the bag so appreciated. The series is available in three sizes, easily distinguishable by the colour of the zippers. Measuring 16 cm x 12 cm x 5 cm and featuring a Blue Zipper, the small bag is ideal for holding Shorty batteries, motors, DiffCheck, and other similar items. MonacoRC Bag S Black is 16 cm x 12 cm x 7 cm in size and gets a Black Zipper and is designed to hold the complete Icharger X6 battery charger, Shorty batteries, motors, DiffCheck, and more. Biggest of the three at 16cm x 12 cm x 9 cm is the Red Zipper bag. With its generous height, this bag can carry larger items compared to the other two models, such as scales, motors, or a battery charger with cables.

View more images here

December 18, 2023

Hobbywing XeRun DRX drag racing motors

Hobbywing has announced a new motor specially designed for 1:10 Drag Racing called the XeRun 3652 / 3662 DRX. Available in 6500, 8500 and 8500 KV, the motor is extremely efficient, resulting in less heat when compared to similar motors. Using a 0.23Nm load test, the 3662 motor coil temperature is approximately 20 degrees lower. The outside temperature is 8 percent cooler also. The motor get a ‘Failure Proof Rotor’. This rotor steel sleeve ensure it will withstand the most extreme demands. The motor adopts a modular structure design, which is convenient for routine cleaning and maintenance, effectively prolonging the service life of the motor and maintaining the working efficiency of the motor.

content

December 16, 2023

Ielasi Tuned 2185 FT onroad pipe

Ielasi Tuned has officially presented their new EFRA2185FT pipe for onroad. This new pipe is a single piece with the Ielasi Tuned C5+ manifold and reinforced pipe to avoid breakage in the event of a crash. It will be available only with the Hard Coated treatment and also for the future they will differentiate the two versions as follows: the classic 2185kit will always be sold with the C4 manifold with the C5+ optional but there will no longer be the HD version. The only HD version as previously mentioned will be the Factory Kit 2185FT. This new one-piece pipe has been approved by IFMAR and EFRA so the kit can be used without any problem at all national and international events.

Source: Ielasi Tuned [ielasituned.com]

December 16, 2023

ProTek ‘MUDBoss’ 2S 50C Low IR LiPo Battery

MUDboss has become one of the fastest growing forms of oval racing in the United States and ProTek RC has introduced their new 2S 50C Low IR LiPo Battery (7.4V/5200mAh) specifically made for this popular form of racing. There are two versions of the battery now available, PTK-5136-24 with a T-Style connector and PTK-5137-24 with a XT60 connector. Both versions were developed to comply with the MUDboss racing class rules and bring racers a higher level of performance they can rely on race after race. The battery has industry-leading advanced technology and weighs only 308g with a flatter discharge curve so the cells maintain higher voltage throughout the run with no significant drop off. The ProTek RC low IR batteries also operate at lower temperatures while providing all the punch necessary to run strong throughout your main.

Source: ProTek RC [amainhobbies.com]

December 15, 2023

Infinity IF15-2 Alu optional parts

Creation Model has introduced a number of new optional parts for its Infinity IF15-2 1:10 Nitro Onroad chassis. The reigning World Champion of the category, the first of the new optionals are the alu front diff case cover. This diff cover is machined from high-precision aluminium, which not only makes assembly and maintenance easier, but also reduces differential joint runout for more stable diff performance. Also new are the low-height alu steering servo horns for easy use on the steering side of the IF15-2. The high-precision, high-rigidity machined aluminium servo horn greatly improves steering response and are available in both 23T and 25T option. For the throttle servo they added a side servo horn made of high-precision aluminium for more direct throttle response and stronger braking.

View low height servo horns here

December 15, 2023

Hong Nor X3GTS Nitro WC Edition

Having announced it would be releasing a limited edition kit to celebrate its World Championship victory with Toni Gruber, Hong Nor has released images of its new X3GTS Nitro WC Edition 1:8 GT Nitro kit. The kit is based on the car with which Gruber secured the Taiwanese manufacturer’s first ever IFMAR World Championship title in Australia in October. It features all the optional parts the German ace used at the Worlds and will come in a special colour box design.

View more images here

December 15, 2023

RCtarget Tire/Multipurpose travel bag

New from RCtarget is their Tire/Multipurpose travel bag. Made from high-quality fabric and embroidered with the RCtarget logo, the bag can serve either as a Tire carrier or multi purpose bag. Designed to carry up to 10 sets of Offroad or GT tires, the bag can also be used as a car travel bag and/or parts carrier. The movable dividers allow you many configurations depending on your needs.

View more images

December 14, 2023

Xray X4’24 Alu Flex Chassis 1.5mm – Swiss 7075 T6

Xray have released a special 1.5mm thick aluminium chassis with unique flex characteristics generates more overall traction and improves steering on its X4’24 Electric Touring Car. Suitable for low to medium traction carpet conditions, as well as high traction asphalt tracks. The narrow chassis is 84mm wide with tapered bottom edge of the chassis to reduce contact between the chassis and the ground during cornering to improve speed. Specially CNC-machined countersunk screws from HUDY Spring Steel #913305 (M3x5), #913308 (M3x8) and #913312 (M3x12) must be used to make the assembly possible.

Source: Xray [teamxray.com]