The MOD 5th & 8th Scale Champs were held at the Fear Farm track this past weekend, attracting nearly 150 entries for the 1/5th and 1/8th scale off-road classes. In 1/8th Pro Buggy and when the dust had settled, it was Mugen’s Ryan Maifield with the overall win, leaving behind Team Associated’s Spencer Rivkin and Mugen’s Tanner Denney who completed the top 3.
Image: Ryan Maifield
Trion have introduced their new low profile carbon fibre shock towers for the Yokomo YZ-4SF buggy. Machined from high-quality 3mm carbon fibre the shock stays place the shock 3mm lower while also featuring an overall lower design which in combination results in improved stability and higher corner speed on high-bite surfaces. The front and rear tower also offer additional upper shock mount positions for a wider tuning window while the rear tower also allows to mount the rear wing in a high or low position. The shock towers are available from now on.
Source: Trion [team-trion.com]
RC-Carbonstore have introduced the new Rebellion-RC narrow carbon fibre main chassis kit for the Awesomatix A800 MMCX mid-motor touring car. Due to the use of much harder carbon fibre material compared to the stock main plate, the designers were able to create a chassis that is 8mm narrower than the stock plate, without sacrificing overall stiffness and flex characteristics, which results in a lot less chassis scrubbing during hard cornering. To further gain advantages of the new narrow design, the old short lower arms mounting positions were removed in favour of a streamlined design that further adds ground clearance during cornering or while riding curbs. In addition to making the chassis slimmer, the main plate also features a 4.5mm more forward battery and a 2.5mm more forward servo position in order to gain smoother corner apex steering while getting a more stable rear end under acceleration. The slimmer chassis design also allowed to reposition the anti-roll bars without having to change anything to the wires or mounts. Other new features include slightly enlarged motor cutouts that allow for easier ESC wire routing underneath the motor can while also preventing the motor from touching the chassis. In order to optimise overall flex, the under-spool and under-diff cutouts were reshaped while additional mounting positions for Rebellion-RC’s new MMCX weight set allow easy mounting of the floating receiver and fan mount plate as well as the forthcoming new Y-stiffener. The chassis is rounded out by mounting positions for Rebellion-RC’s signature under-battery rubber dots, a 0.3×45 degree lower chamfer for looks and durability and it is available in 2.0mm, 2.2mm and 2.5mm thickness.
Coming from T-Works and made for the Serpent SRX8 GTe 1/8th scale electric GT kit are new optionals in the form of a titanium turnbuckle set, a precision ball bearing kit as well as titanium and gold-colour screw sets. The 7-piece titanium turnbuckle set includes all needed turnbuckles to replace the standard steel items with lighter and cooler looking parts. While scrubbing a good amount of weight, the titanium spanners also are of greater corrosion resistance when running in wet weather conditions.
Coming from JConcepts is the JCI Junior Mortician body for the Axial SMT10 and similar vehicles. The converted to panel truck body is competition friendly with its compact size and uniquely shaped front and rear fender designs. As a racer, front and rear clearance is important for racing and freestyle competition and the Junior Mortician is tightly compressed to help pull-off the most ridiculous freestyle runs possible. Looking into the eyes of the body shell tells you everything you need to know, a menacing and battle tested beast rests behind those optics. JConcepts created an angular front-end, platform front flares for a vintage feel and a very broad centre grille section to back up promises of massive carnage. The panel truck cab and roof-over section is flat and to the point, the windshield has a slight V-treatment for realism. Maximum imagination to the masses is what this body shell is all about with the large exposure panel areas. The tall panel section is a bonus, an art-board in a sense to decorate, decal or paint however the user desires. Included in each body set comes a clear and heavy-duty polycarbonate body, decal sheet and the paint mask for all windows.
KO Propo’s carbon fibre throttle servo horn is a perfect complement to the existing range of carbon fibre steering servo horns and ideal for many 1/10th 200mm nitro on-road cars. The clamping design servo arm utilises an aluminium centre section with a sturdy yet very lightweight 2.5mm carbon fibre arm that takes the throttle and brake linkages of cars such as the Shepherd Velox V10, Infinity IF15 or Kyosho V-One R4. The set includes the carbon fibre servo arm, the aluminium baser and upper washer as well as a M2x6mm cap screw.
Source: KO Propo [kopropo.co.jp]
JConcepts have introduced their latest Street Eliminator body shell, the infamous 1987 Buick Grand National. The American produced, sinister, wedged shaped vehicle is now released to the RC enthusiast to fit the latest Street Eliminator vehicles on the market. The crew in the JConcepts R&D department tackled one of its finest projects to date and together with Chevrolet licensing has produced some exciting muscle. The G-body construction is a shape fit for the RC scene. The vehicles which are wide-bodied, flat panelled and have a low-roof line always track well down the racetrack. A low front chin, bumper construction and pocketed headlights immediately look like punishment is headed your way. The long and swooping quarter-panels are a staple of this generation vehicle and it certainly cuts like a knife on the drag strip. Fender flares are apparent and appropriately positioned and sized for tires like the JConcepts Hotties tyres. The cab itself is one of the identifiable features of the GNX and its balanced positioning and sharp lines makes competitors retreat in fear. Rear bumper creation was detailed even allowing position for personalised license plate from the included decal sheet. A small built-in rear spoiler keeps things looking original for those sleepy builds and creations. Included in each body set, a 1987 Buick Grand National decal sheet and the paint mask for all windows.
HRC Distribution have introduced the new HRC Racing Transporter car bag for 1/8th and 1/10th scale vehicles. The multi-functional bag allows to carry a single 1/8th or 1/10th scale vehicle with the raised side portions capturing the wheels and parts of the suspension, meaning any possible collected dirt stays inside the bag when carrying or storing the bag, meaning trunks, pit spaces or work benches stay cleaner for longer. An incorporated bottom plate provide additional stability to the bag while the patent pending backpack functionality allows to keeping both hands free despite carrying your car. The back measures 46x32cm and it is available from now on.
