February 1, 2020

JConcepts 9 Shot 2WD Buggy wheels

JConcepts ups the ante in in the wheel department and provides a new style for 1/10th 2WD off-road and dirt oval racers. The 9 shot is full-scale inspired to provide the ultimate performance to off-road racing vehicles. The 9 spoke design, 2.2” mounting diameter, 12mm hex base design fits a huge assortment of vehicles competing in the market such as Team Associated, Yokomo, Xray, Kyosho, Serpent and Schumacher. The wheel features a deep 3D depth spoke with mock 5-lug bolt pattern to bring Sprint, Late model and Street Spec cars to another level of scale inspiration on dirt oval scene. The wheels are the maximum size allowed under ROAR rules and they incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process and are packaged 4 pieces per pack in white, black or yellow color styles. They come as 2WD front or 2WD/4WD rear wheels and will hit stores very soon.

View more images here


January 31, 2020

Protoform Vittoria GT body shell

Protoform have announced a new GT-style race body option for racers in scale-spec style classes such as USGT, GT10 or Spec Grand Touring; the Vittoria GT. The body takes inspiration from a new wave of Italian hypercars, featuring a low-CG, cab-forward design sure to provide exceptional handling characteristics while also looking stunning on the track. The rear wing features two trim lines: a lower 10mm tall line for USGT-sanctioned racing, and a taller cut line for no-holds-barred club racing where extra rear downforce is needed. Fully-approved for competition by USGT rules, the 190mm Vittoria GT is produced in high-quality 0.75mm polycarbonate, coming in at around 85g to 90g race-ready weight. A comprehensive decal sheet including; windshield headers and number plates, wing mounting hardware, and paint-then-peel overspray film are all included.

View more images here


January 31, 2020

Torpine R11F 2mm carbon fibre upper deck

Coming from Torpine is a new carbon fibre upper deck for the ARC R11F FWD kit. Of a symmetrical design the top deck is softer than the kit upper deck with comparable front and rear geometry. The result is a more equal torsional chassis flex that makes for a more precise and easier to drive car. The top deck is machined from high-quality 2mm carbon fibre and it is available from now on.

Source: Torpine [torpine.com]


January 31, 2020

2019/20 BRCA LMP12 Nationals Rd4 – Report

Round four of the 2019/20 BRCA LMP12 nationals took place in Chesterfield last weekend. A capacity entry of 85 drivers took part in the weekend’s racing. Unfortunately round 3 of the championship had to be cancelled in December due to structural issues with the venue meaning that the Championship has been reduced to three counting rounds from five. Chesterfield hit their usual high standards laying a challenging track on perfectly smooth carpet laid with no tape joins to upset the cars. Saturday would see drivers competing in 13.5 and 17.5 stock classes. Winner of the first two rounds Olly Jeffries would be looking to complete the trio this weekend. From the start it was clear who was the racer to beat with Olly topping the timesheets on all four rounds of qualifying. Mark Stiles would get the closest to Olly lining up second on the grid from David Spashett and Ollie Payne. Olly would get a clean start and after a first lap error from Mark Stiles that overturned the car of David Spashett would complete the race unchallenged taking his third win and securing the 13.5 Stock Championship.

Continue reading the report here


January 31, 2020

Hudy air filter sealant

Hudy have introduced their new air filter sealant, a chemical that was developed for the use between the sides of the foam filter and the plastic part of the filter to perfectly seal the contact area, ensuring no dust will pass through. The sealant is usable with all foam air filter elements, it is easy to apply and long lasting, ensuring maximum protection for the delicate engine internals. The sealant should always be used in combination with a high-quality foam air filter oil.

View another image here


January 31, 2020

RaceRoof Series Rd2 – Report

The new RaceRoof indoor on-road track in Istanbul, Turkey held round 2 of the RaceRoof Series last weekend in Touring Pro Stock and Club Stock classes. The race was well attended and even the freezing weather did not lure the competitors away. In the Pro Stock class it was Atahan Yildiz with the overall win, coming from the 2 spot on the grid, leaving behind Alain Sarafyan in 2nd overall. Yunus Sahin ended the day on the final podium spot for an all-Xray top 3.

Continue reading the report here


January 31, 2020

Protoform Vittoria GT body shell – Coming soon

Protoform have released a first teaser image of their forthcoming all-new Vittoria 1/10th scale GT body shell. Full details of the 190mm USGT body will surface very soon from what is understood.

Source: Protoform [racepf.com]


January 31, 2020

HB Racing European Race Days – Announcement

The 2020 HB Racing European Race Days will be held from the 3rd to 5th of April in Boisset-St-Priest, France. Sign-up for the event, that is reserved exclusively for HB Racing 1/8th scale nitro and electric buggies, is available now. Each entry includes #PA9387 Performa Black Jack Yellow tyres and #PA9400 Wheel Stickers as a hand-out spec package. Full information can be found on the event’s website here.