Red RC » News

January 27, 2012

Robitronic 5500mAh 3S 60C LiPo pack

Robitronic have added this 5500mAh 3S 60C LiPo pack with hard case to their battery line up. The ideal LiPo pack for monster trucks, truggys and buggys, it features the newest generation internals with extra low resistance to keep higher voltage for the complete run. Due to the small dimensions of the battery it fits perfectly under most bodies and the battery comes equipped with a convenient “T” connector and comes pre wired with 10 cm long, super flexible 4mm² silicon cable EH Type balance connector.

Source: Robitronic [robitronic.com]

January 27, 2012

Tresrey DEX210/410 hop-up parts

Tresrey have released new hop-up parts for the Team Durango DEX210/410 expected to be released in early February. First up is the aluminium RF suspension hanger for more stiffness and durability. Changing “kick-up” angle to 3deg from 2deg which is kit standard makes the rear of the car more stable and gives you more room to set-up.

View more details here

January 27, 2012

EFRA 1/12th Spec Euros cancelled

EFRA logo

More announcements from EFRA, this time its the turn of Electric Vice Chairman Russell Giles to tell us that the 1/12th Spec Euros, scheduled for 9-11 March in Austria has been cancelled due to lack of entries.

Read the full letter here

January 27, 2012

KO Propo BSx Standard servo & wires

KO Propo have released a number of new items starting with this BSx Standard servo. Based on the successful high-quality RSx series materials is this high end brushless steering servo. Featuring full aluminium gears made from a special Japanese aluminium, double ball bearings and an aluminium middle case machined from one piece of aluminium that incorporates the gear pins and motor being held properly in place. Suitable for all 1/8th and 1/10th scale vehicles it has a speed of 0.06s@60°(7.4V)/0.07s@60°(6.0V) and a torque of 20.0kg-cm(7.4V)/15.0kg-cm(6.0V). Also new is a 7.4V adjuster connector for allowing RSx series, BSx series servos or any high voltage servo to operate at high voltage in an electric vehicle. Finally their is a Servo lead extension wire with an increase to 50 cable core copper wire that allows for more current to be carried through a servo or a receiver battery pack.

View the other products here

January 27, 2012

MIP ‘Real Shocks’ Bypass1 piston technology

MIP have announced the release of their ‘Real Shocks’ Bypass1 piston technology. Unlike any piston seen before in the RC Industry, this Piston is design inspired by Real Off-Road Vehicles. The basic drawback of a stock piston is that when the shock compresses, all of the oil must be forced through the provided holes at once. Of course, this design works to an extent, but as the shock moves faster and more force is applied the oil simply cant travel through the holes fast enough. Because of this, the shock will actually pack out thus hindering the cars handling. MIP’s Bypass 1 piston regulates the amount of oil transferring from the bottom of the shock to the top depending on the amount of velocity and force the shock is subject too. The allow a car’s shocks to perform unhindered and gives the driver and endless range of adjustability.

View an image showing the function here

January 27, 2012

Vertigo Performance Tyres stiff rims

Italian company Vertigo performance tyres have released a new rim made with a light polymer with graphite polymer inside. The new rims guarantees top performance during a complete race, without the structural deformation normally caused by hot temperatures. Also with this new material Vertigo have improved the structural design of the wheel to improve upon some minor structural deformation.

Source: Vertigo [vertigotyres.com]

January 26, 2012

EFRA clarify 1/8th Track rules

EFRA logo

Having received clarifications on the new EFRA 1/10th IC Track rules just 2 weeks ago, today it is the turn of Sander de Graaf, 1/8th track chairman, to clarify the rules for his section. The confusion surrounding the new rules, voted on at the recent AGM, has again to do with the date of implementation. Most of the new rules will come into effect this year with the exception of the new lower weight limit of 2400 grams which will only come into affect in 2013.

Read the full letter here

January 26, 2012

Associated XP SC700-BL & SC1200-BL ESCs

Team Associated’s XP SC700-BL and SC1200-BL brushless ESCs are now available. Both models are available as a stand-alone unit or in combination with a powerful Reedy 540-SL/550-SL brushless motor. XP Brushless ESCs are water-resistant for maximum durability. Their light weight and compact design allows for easy installation in most 1:10 vehicles. Simple calibration and a wide variety of tuning options make these ESCs perfect for both casual enthusiasts and racers. When paired with a Reedy 540-SL/550-SL brushless motor, you create a potent combination of power and efficiency that brings performance to a new level. More power and less maintenance, elevate the fun factor by increasing top speeds and reducing down time.

View complete details here