April 27, 2011

Matt Sistrunk takes all at I-20 series Rd1

Matt Sistrunk takes all at I-20 series Rd1

Last weekend was the first round of the I-20 series in Monroe, Louisiana. Racers from all over the area came to a freshly built track at Full Throttle Raceway. With the rain during the week the Track crew had some work ahead of them. By the time qualifiers started the track was in great shape. The Battle for TQ was close but TLR driver Matt “Puddin” Sistrunk took the top spot in buggy followed closely by TLR privateer Denver Houghton. Following the start of the main it was a three car battle with Denver taking the early lead followed by Matt and Allen McCoy. Matt and Denver battled for the lead the entire race with Allen in the shadows waiting for them to mess up. Matt passed Denver on the last lap of the race and they crossed the line .05 apart with Matt taking the win, Denver in 2nd and HB driver Allen McCoy in 3rd. In Truggy Matt started 3rd with Steve Traxler taking TQ. Matt took the lead in early going and never looked back, winning from the HB pairing of Jeff Gray in 2nd and Steve Traxler in 3rd.

Source: TLR [tlracing.com]

April 27, 2011

JConcepts TLR 22 Punisher body

JConcepts TLR 22 Punisher body

The Punisher body by JConcepts for the TLR 22 is the meanest, nastiest thing out for 1/10th buggy racing. The slight cab-forward treatment is amongst the most aggressive in class giving the Punisher top notch performance. Blended wing / body design gives additional down-force to the side-pods and windshield which increases driveability, corner speed and jump control. The rear base of the cab area represents the latest offering for 1/10th buggy racing featuring a rear scoop allowing additional tune-ability and cooling for high-performance racing. The Punisher body includes both cut-lines so the user can trim to either rear or mid motor chassis configurations. In addition to the newly designed body JConcepts has included 2 of the popular 6.5″ wide high down force V-wings that are commonly used around the world.

View more images of the body here

April 26, 2011

Huang Yi-Hao wins 200mm Rd1 in Taiwan

Huang Yi-Hao wins 200mm Rd1 in Taiwan

The first round of the Taiwanese on-road national championship was held last weekend at the Tainan GTR Racing Track and attracted close to 80 drivers in 3 different classes 1/10th GP, 1/8th GP and 1/10th EP. Serpent Taiwan driver Huang Yi-Hao took his S733 to the expert class TQ, setting a best lap time of 17.6 seconds, which would be a new class track record. He went on to take the win in the final ahead of Xray NT1 driver Howard Cho in 2nd with another Serpent S733, that of Ji-Chen Ton, in 3rd. The 1/8th GP class was won by top qualifier Wing Wang Sang-Chun ahead of Yang Chong Zha in 2nd and Shu Jhi Hao in 3rd, while in the 1/10th EP class it was Leo Chan who took victory from pole position, with Zen Wen-Pin in 2nd and Ron Chen in 3rd.

View the other podiums here

April 26, 2011

Toshiki wins 2011 CRC cup

Toshiki wins 2011 CRC cup

The 2011 CRC cup was held at one of the finest carpet venues in Japan, the Crest speedway Race facility in Gunma Prefecture. The CRC cup is an open race for all 1/12th pan car to participate in that is sponsored by Team CRC Japan. 43 drivers participated in this race, including three from the quake-stricken area of the country. Following qualifying it was CRC driver Hayato that took the TQ ahead of team mate Toshiki in 2nd. In the final the places were reversed with Toshiki taking the win ahead of Hayato in 2nd.

View a video from A-main leg 2 here

April 26, 2011

Team Orion Carbon FLX LiPo packs

Team Orion Carbon FLX LiPo packs

Following the success of the hard case packs developed specifically for the 1/10th scale Traxxas E-Revo & Summit as well as the 1/16th scale Traxxas E-Revo, Summit and Slash platforms, Team Orion has designed a hardcase pack to maximize the capacity and overall performance of the HPI Savage Flux. It provides a perfect fit and combines LiPo technology with maximum capacity to help push the Savage Flux to its limits. Featuring a carbon look special hard case, up to 45C discharge rate and it comes in 2S and 3S Versions with Deans connector fitted, so it can go into any HPI cars without modifications. Available in 4000mAh, 6000mAh, 8000mAh 2S and 4000mAh and 6000mAh 3S versions.

Source: Team Orion [teamorion.com]

April 26, 2011

Arrowmax RX8 ventilated brake disk

Arrowmax RX8 ventilated brake disk

Arrowmax will release this new ventilated brake disk for Xray RX8 chassis. CNC machined from high quality steel it features multiple holes, some with air channels, to ensure the best heat dissipation and friction, while also remaining lightweight and durable.

Source: Free Max [freemaxmp.com]

April 26, 2011

Shepherd V8 Velox yellow clutch shoe

Shepherd V8 Velox yellow clutch shoe

Shepherd have introduced their new performance enhancing yellow clutch shoe for the V8 Velox Competion Clutch. This new clutch shoe was succesfully used by our factory teamdrivers at the World Championship 1/8th scale where Shepherd had the second most cars in the top 20 after qualifying with Daniele Ielasi and Michele Romagnoli even ranked in the top 10. The shoe is CNC-machined from a special high grip material that is a little bit harder than the optional white clutch shoe material. Due to the high friction surface it slips less providing maximum acceleration also on high grip tracks when setting the enganging point to high RPMs.

Source: Shepherd [team-shepherd.com]

Mibosport
TargetRC
VP Racing
T-Works