Red RC » P Off Road

June 26, 2014

KO Propo RSx one10 Response servo colour variants

KO Propo’s RSx one10 Response low-profile servo is now also available in three different colour variants. Offering 0.07s of transit time and a torque of 9.0kg-cm at 7.4V input the servo offers the same specifications as the standard servo but your choice of a red, purple of blue middle heatsink section makes it now even easier to colour match the chassis and accessories. Other features include a coreless motor and gold-plated connector contacts.

Click here to view the colour variants

June 26, 2014

RT RB One ultra lightweight wheel axle

New from the Reckwald brothers’ own Reckward Tuning brand comes this set of wheel axles for the RB One and RB E-One. Fitting both the front and rear of the buggy the CVD wheel shafts are machined from high-quality 7075 aluminium and offer a lower weight for reduced rotation mass and unsprung weight resulting in improved car performance on the track. The axles include grub screws for the wheel adapter cross pins and are usable on both the competition and RTR variants of the RB One and E-One.

Source: RMV [rmv-deutschland.de]

June 26, 2014

Area RC DBXL double arm steering system

Made for Losi’s DBXL large-scale buggy is this double arm aluminium steering set from Area RC. The set includes new inner aluminium steering bellcranks with the servo saver side offering a dual arm setup for the steering servo links meaning the steering assembly is actuated by two and not just one steering link, which is meant to make for a more precise and more reliable steering action. At the same time the dual links on the servo arm will lower the stress on the servo resulting in improved durability of the highly stressed part. The set is available in red, black and silver colour and also includes a reinforced servo saver spring and a ball-raced aluminium steering link.

Click here to view the installed steering assembly

June 26, 2014

Team Associated B5/B5M FT ball bearing set

Team Associated introduce a new Factory Team ball bearing ses for the B5 and B5M buggy. Including ball races for the front axles, the rear hubs, and the gearbox the kit is ideal to replace worn out bearings. A blue rubber seal protection on one side makes the bearings, that are also available as separate 4-piece packs per size, more robust when the going gets tough.

Source: Team Associated [teamassociated.com]

June 25, 2014

Kyosho FO-XX 1/8th basher truck

Kyosho have released first information and photos of the FO-XX 1/8th scale basher truck based on what appears to be a revamped Twin/Mad Force chassis. Featuring a lightweight vertical plate chassis with inner dirt shields and front and rear rigid axles the truck resembles a mud-slinging Formula Off-Road vehicle with its paddle-type tyres and scale bodyshell. Threaded big bore shock absorbers make for improved off-road performance while a front bumper with light buckets not only look cool but also protect the chassis from the rigours of off-road racing. The FO-XX comes ready-to-run including a 2.4GHz radio system, a waterproof high-torque steering servo and your choice .25 big block nitro motor or a high-performance brushless system.

Click here to view more photos

June 25, 2014

Arrowmax B-Max4 III rear 50g brass weights

Made for the use with the Yokomo B-Max4 III are these 50g brass weights for the rear part of the chassis. Offering a cool shiny look the weights come laser etched with the Arrowmax logo and they help to fine-tune the weight balance of the buggy for improved performance on high-bite surfaces.

Source: Arrowmax [arrowmax-rc.com]

June 25, 2014

Powerstar PL-1207 plastic case low-profile servo

The Powerstar PL-1207 low-profile servo is now also available in a plastic case variant with different colour middle heatsink sections. Offering a torque of up to 12kg-cm and a speed of up to 0.074s at 6V input, the brushless servo with mixed stainless steel and titanium gears is good for the use in 1/10th on-road and off-road vehicles alike. It weights in at 45g and is available in four different colour variants, red, orange, blue and light blue, to match with the colour scheme of your car.

Source: Powerstar [powerstar-racing.com]

June 25, 2014

Arrowmax B-Max rear knuckle set & multi shock clamp

Arrowmax have a rear knuckle set for Yokomo’s B-Max line of 1/10th buggies and the V3 version of their multi shock clamp tool available. Starting with the Yokomo option part, the rear knuckle set is designed for the use both on the B-Max2 and B-Max4 buggy and includes two blue anodised rear hubs, carbon fibre camber link mounts, rubber-sealed ball bearings and a hardware set. Six different mounting positions for the upper camber links give additional setup options while overall rigidity is improved at the same time as the set replaces the stock plastic hubs.

View more details here