Red RC » P Off Road

July 22, 2014

Team Orion Vortex VST2 Pro LW lightweight motors

Team Orion soon have special lightweight versions of their Vortex VST2 Pro electric brushless motors available. It is understood that they offer the same specifications as the regular weight variants but the heavily machined cases scrub around 15g of weight. Especially the front part sports new milled out sections that not only reduce weight but help with cooling. The LW motors are available in a range of windings including modified 3.5T, 4.0T and 4.5T variants as well as 10.5T, 13.5T and 17.5T stock motors.

Click here to view another photo

July 22, 2014

PR Racing SB401 4WD off-road buggy

Precirotate introduce the SB401 1/10th scale 4WD electric off-road buggy. The vehicle is based on a black anodised aluminium chassis that allows to run a conventional saddle pack battery in the rear or a single 2S shorty pack with the electronics sitting on the opposite side of the chassis. Composite side rails fit snuggly with the body to keep dust, dirt and moisture away from the chassis. The drivetrain makes use of CNC-machined gears for maximised durability while a total of six CV-type driveshafts take care of smooth and efficient power distribution. On the suspension side of things the SB401 offers 12.75mm aluminium big bore shock absorbers with volume composition bladders and a total of four different pistons supplied with the kit. The kit is rounded out by a cab forward bodyshell and a medium size rear wing.

Click here to view the features and more photos

July 22, 2014

Xray XB8 aluminium steering kingpin plates

Xray introduce new aluminium steering kingpin plates for the XB8 buggy. The plates are specially designed for the use with Xray’s XPBS pivot ball system and allow to fine-tune the Ackermann setting and thus the steering characteristic of the buggy. Beside the standard 14 degree part there are also 10 degree and 6 degree plates available that reduce the on-power steering, with the 6 degree part offering the smoothest on-power steering setting. The parts come as pairs, they are machined from 7075-T6 aluminium and offer a hard-coated finished for durability and looks while white markings help with identification.

Click here to view the other two kingpin plates

July 22, 2014

Schelle B5M aluminium rear ballstud mount

Schelle Racing Innovation’s latest option part for the Team Associated B5M mid motor buggy is this aluminium rear ballstud mount. The lightweight mount adds durability in addition to increased tuning options as along with standard kit width mount holes – the middle hole on the Schelle part – there are option inner and outer holes which give added fine tuning for the upper links. The mounting bracket is available in either black or blue anodised versions.

Click here to view another photo

July 21, 2014

Schumacher Cougar alloy front hub carriers

Available now from Schumacher are these CNC alloy hub carrier in black with silver edges. Stronger and longer wearing than the standard kit plastic parts, they are suitable for the Cougar KF and KR which use hex wheels. The hubs are also useable on the Cougar SV2 if fitted with the hex wheel conversion.

Source: Schumacher [racing-cars.com]

July 21, 2014

Team C TC02C Evo 2WD mid motor buggy

Team C Racing introduce the TC02C Evo mid motor 2WD buggy kit. Based on the proven TC02C, the Evo variant received a new 8mm longer composite chassis, 12mm big bore aluminium shock absorbers, a front aluminium arm mount, and a rear anti-roll bar. The new design chassis is designed for the use with shorty, saddle pack or square pack LiPo battery packs while the 4-gear transmission is equipped with a heavy duty gear differential and a machined aluminium heatsink motor plate. The kit is topped off by a new cab forward bodyshell.

Click here to view more photos

July 20, 2014

Exotek SRX hub set & mid rear bulkhead

Exotek Racing have two new aluminium option parts available for Serpent’s SRX-2 line of buggies and trucks. First up is a front C-hub set made from 7075 aluminium. Weighing in at only 12 grams, the parts are lightweight yet strong and with the included 2mm spacers they match the stock SRX C-hub geometry. With the vertical ball end mounting, roll centre adjustments are easily made by adding or removing spacers.

Click here to continue reading

July 19, 2014

Arrowmax B-Max aluminium spring cup set

Arrowmax now have a 4-piece aluminium spring cup set for Yokomo’s B-Max line of 2WD and 4WD buggies available. Offering improved rigidity over the stock parts, the cups promise a more secure fit of the springs. They come blue anodised and with laser-etched Arrowmax logos.

Source: Arrowmax [arrowmax-rc.com]