Red RC » P Off Road

August 20, 2014

Avid Aura bearing line

Avid have introduced their new Aura bearing line. Taking what they learned from their rear ceramic engine bearings they shrunk that technology down to offer the most advanced bearings to be used in the gearbox of popular 2wd 10th scale off-road vehicles. These bearings have no seals, a high speed nylon ball retainer, SiN34 ceramic balls, tighter tolerances and high-speed oil and was developed for the racers that enjoy maintaining their equipment and don’t mind spending a little extra to have the best performance available. They are not stopping with just gearbox kits either and will be rolling out the Aura bearing with different seal options for those that would like to use them throughout their whole vehicle. Bearing kits are currently available for a wide range of 2wd buggies.

Source: Avid [avidrc.com]

August 20, 2014

Serpent Spyder RTR 2wd RM buggy

Serpent have released details of the Ready to Race Spyder 1/10 rear motor Buggy. The RTR Spyder buggy is based on the high end competition version of the Spyder RM buggy and shares most components and geometry. All option parts of the race version also fit the RTR version. The RTR version comes supplied with Dragon RC electronics, servo and tires. Release date is expected to be end of August.

View more details here

August 18, 2014

Serpent Cobra E-Truggy chassis plate & shock tower

Serpent have released a number of new items for their 1/8 Cobra E-Truggy. First up is the hard coated 7075 T6 aluminium CNC machined chassis plate for less flex and more durability, complete with laser engraved logos. Also new is a great looking lightweight and very durable grey anodized rear shocktower, a more durable option than the standard carbon fibre version. And finally the standard front and rear bodymounts on the E-
Truggy can also be used on the earlier GP Truggy when combined with the E-Truggy shock towers.

View the new shock tower here

August 18, 2014

JConcepts RC10B5 & B5M Honeycomb motor plates

JConcepts have released these replacement motor plates for the popular RC10B5 and RC10B5M vehicles. Looking at the typical construction of the second operation processes on standard motor plates, it easy to see why bending is sometimes an issue. The design team at JC have incorporated a honeycomb milling affect with placement more suited to surrounding geometry making the plate lightweight and very rigid in multiple directions. The honeycomb features add a 3D look especially as they remain natural aluminium while the rest is available black or blue in color. Slight chamfering on the 3mm thickness material allows the rather beefy plate to look quite skinny.

Source: JConcepts [jconcepts.net]

August 16, 2014

Infinity by X-Factory B5M chassis

X-Factory introduce their new Infinity by X-Factory line, a line of hop-ups for other car brands. The first release is a new carbon fibre chassis for the Associated B5M and the line will be expanded soon to include shock towers, new steering systems and other products that take your car to the next level. This new chassis gives the B5M lots more flex and tunability with drivers reporting much better cornering and increased forward bite on all surfaces. Rough tracks require more flex, so loosen some or all of the side deck screws on the Infinity chassis. The forward screws affect front flex, while the rear ones work on the back end. The kit comes complete with the CF chassis, all the other CF parts, aluminium stand-offs, hardware, and instructions.

View the complete kit here

August 15, 2014

JConcepts B5 & B5M alu front suspension brace

New for the Associated B5 & B5M from JConcepts comes this aluminium front suspension brace. The machined and anodized aluminium brace is spot on in terms of geometry, fit, finish and position. The edging has been slightly chamfered to remove sharp corners and adds extra luster to an already polished looking piece while the tightened design eliminates extra bulk and weight with deep cutouts. Finally the perimeter ledge has a hefty chamfer which provides slightly more front clearance during hard landings and corning.

Source: JConcepts [jconcepts.net]

August 14, 2014

Exotek B5 carbon front towers

New from Exotek for the Associated B5 comes this heavy duty 4mm carbon fibre shock tower set with machined alloy camber link mounts for both the B5 gull wing arms and B5 flat arms. Much stiffer and stronger than the stock tower, recess cuts on the back side of the tower allow for spring clearance. Choose between factory blue or black machined camber blocks. Matching the stock geometry the total weight is only 14 grams and 13.6 grams respectively.

View more images of the product here

August 14, 2014

JConcepts TLR22-4 pre-cut chassis protective sheet

JConcepts expand their range of pre cut chassis protector decals with the addition of one for the TLR 22-4 4wd buggy. With 2 pieces included per package, the durable and low-resistance material fits each chassis layout like a glove and adds protection and style in one easy package.

Source: JConcepts [jconcepts.net]