Red RC » P Off Road

May 19, 2014

Schumacher Cat K1 & Cougar KF transmission housing

Schumacher introduce a new alloy upper transmission housing for the Cat K1, K1 Aero and the Cougar KF. Designed to replace the previous version the new parts allows to mount the shocks simply and quickly in front of the axle or behind with the removal of two screws. Changing the shock location is an important tuning option as the front position provides the best solution for high grip with good steering and responsiveness while rear mounted shocks give good stability on bumpy or slippery tracks.

Click here to view another photo

May 19, 2014

MIP Pucks Shiny drive system for B-Max2 MR

The latest buggy to receive MIP’s Pucks drive system treatment is Yokomo’s B-Max2 MR. Included in the set, that makes for a better serviceable drivetrain, are MIP’s Shiny steel C-CVD driveshafts, changeable Pucks cushions, new steel outdrives as well as MIP’s clear ball diff grease and blue thread lock.

Source: MIP [miponline.com]

May 19, 2014

Xceed bearing size tool

New from Xceed comes this bearing size tool. The stepped design allows to measure the inner diameter of metric bearing from 2mm up to 15mm and it also help to hold ball races in place during cleaning or lubing. The tool is made from machined aluminium and comes in Xceed’s signature green anodising.

Source: Xceed [xceedrc.com]

May 17, 2014

Pro-Line Electron tire & Velocity VTR wheels

Pro-Line have unveiled their new Electron 1/10th rear tire, available in M4 Super Soft and MC Clay compounds. The Electron shares close family ties with Pro-Line’s popular ION tire with the iconic dirt grabbing centre tread and futuristic styling. Featuring connected tire tread technology to improve traction and wear on even the most abrasive of indoor track conditions, the square centre pins laid out between the connected tread provide consistent forward and side bite even when the track gets dusty. PL have also introduced their new Velocity VTR 2.4” front wheels. The VTR wheels introduce the horizontal mounting style common in 1:8 Nitro and brings it to the precision environment of the 1:10 racing scene, resulting in a lightweight tire/wheel package. The tire mounting surface has been increased from 2.2” to 2.4” giving the tire a lower profile sidewall and ultimately more traction. Suitable for the front of the 2wd 22, RB6, B4.2 and B5 and a separate version for the 4wd B44.2 they are available in yellow or white.

View the VTR wheels here

May 17, 2014

AKA Roadblock SC tires

New from AKA, the Roadblock has been designed to get your short course truck through any surface from to dirt to asphalt. The dense, lugged tread pattern will give you long life to bash with plenty of grip, pack after pack. It comes in AKA’s proprietary Soft Compound and is available in pairs with Red inserts or pre-mounted on Cyclone wheels with fitment options to suit most short course trucks.

Source: AKA [raceaka.com]

May 17, 2014

Ultimate M814 .21 off road engine

Ultimate Engines have introduced their new M814 .21 off road engine which is based on the successful M8 engine with a few improvements. The cooling head has been redesigned to remove weight for lowering the centre of gravity, as well as to increase the surface of the cooling area. Furthermore, this CNC machined cooling head has been modified to make adjusting the idle easier. In addition the mounting points of the crankcase have also been modified to avoid rubbing the rear centre shaft. Ultimate also have their new EFRA 2119 off road Super Strong Tuned Pipe set w/ Manifold that has been developed to provide a good balance of top end, and low end power with good run time. Available as combos, which include the engine, complete pipe set, clutch, clutch bell, air filter and foam, they also now supply the engines and pipe alone without combo.

View the pipe and combo set here

May 16, 2014

Xceed 1/8th & 1/10th wheel balancers

Available now from Xceed are there new wheel balancers for 1/8th off-road, 1/8th on-road and 1/10th on-road tyres. They are built around a sturdy aluminium base that can be disassembled for storage and transportation purposes. The main balancer shaft is made from spring steel and rests on ball races for super true running. Included with each balancer comes a fabric pouch to keep all parts together during storage.

Click here to view more photos

May 16, 2014

LRP introduce updated Pulsar Touch charger

LRP’s popular Pulsar Touch DC charger received a small update in the form of a new UV light resistant case, updated discharge cut-off voltage settings and an additional EHR to XHR balancer adapter. The updated case will prevent the charger from becoming unsightly due to sun bleaching while the new cut-off values will prevent LiXX batteries from becoming deep discharged. The additional balancer adapter on the other hand improves the compatibility to all commonly used LiXX packs. Otherwise the charger, whose first version was released back in 2010, remains unchanged.

Source: LRP [lrp.cc]