Kyosho America introduce a 69 teeth 48 pitch spur gear for the use in stock and spec brushless classes. The smallest spur gear to fit the current 1/10th slipper clutch allows the lower ratios typical for this type of racing and it is made from high-quality composite material for low weight, high strength and low running noise.
Source: Kyosho [kyoshoamerica.com]
Reds Racing have new R5 buggy engines available in the form of the R5T Team Edition and the R5 Racer. The 2014 versions both feature a new front ball bearing with improved sealing and better durability, a redesigned crankcase with wider fins close to the exhaust makes for better cooling and the power plants also come with a new combustion camber insert and cooling head. The R5T Team Edition is hand-tuned by Mario Rossi and comes with a silicone-filled, balanced and tuned crankshaft, rear ceramic bearing, RDC hard-coated backplate, 5-port sleeve with exhaust port booster and a long needle carburettor. Before leaving the factory the engine is hand inspected and compression checked for maximized performance.
Click here to continue reading
Speed Power introduce the E801B 1/8th scale electric off-road ARTR buggy kit. The vehicle builds on a tough aluminium chassis with 3-differential shaft drivetrain, it features aluminium suspension mounts with moulded inserts for easy setup adjustments and it comes with aluminium shock towers and spring steel CVD driveshafts. Included are also hardened steel main, crown and spur gears, big bore shock absorbers with rubber boots, a carbon fibre differential and steering support plate as well as a clear polycarbonate bodyshell. The buggy comes factory assembled and without the needed RC components, speedo, motor and batteries.
Click here to view more photos
MCD Racing have new setup tool for large scale cars available in the form of a camber and ride height gauge. The camber gauge allows measuring the wheel’s camber angles in a -10 to +10 degree range while the ride height tool measures in a 20mm to 70mm range. An extended arm allows to virtually measure on all parts of the chassis for improved usability and precision. The tools are made from high-impact plastic and work with 1/5 and 1/6 scale cars, buggies and trucks.
Click here to view the ride height gauge
RB have two new nitro airfilter foam sets for the RB One as well as the MBX7 and the XB8 available. The foam pieces offer improved airflow and a high degree of filtration to maximise performance and airflow. Included are 12 inner and 12 outer foams per set.
Source: RB [rbproducts.com]
Germany company PSM have new optional parts for Yokomo’s B-Max2 and B-Max4 III buggy available. Made for the 2WD B-Max2 is the 4mm carbon fibre front shock tower. CNC-machined from glossy finish material the part weights in at 4.5g and it comes including two 7075 2mm aluminium spacers. Also new is the front upper brace for the B-Max4 III. Cut from 3mm material the brace weights in at 3g, it reinforces the front steering and bulkhead assembly and comes including two aluminium spacers for the steering posts. Both parts are direct replacements for the respective stock items and are available now.
Click here to view more photos
LRP have new option parts for the S10 Twister line of off-road vehicles as well as alloy servo arms available. Starting with the Twister parts, the aluminium wheel adapters are made from high-quality material and they offer increased rigidity over the stock parts. Included are also four steel drive pins and rubber O-ring to hold the pins in place. Also new are three aluminium servo arms for 23 teeth, 24 teeth and 25 teeth splines. Coming as single arm variant for steering duties and dual arm versions for throttle and brake applications in nitro cars, the arms offer increased rigidity especially when used with high-power servos for increased steering precision and brake holding power. They come blue anodised and with a pre-drilled ballstud mounting hole.
Click here to view the servo arms
Vampire Racing introduce their new line of highly flexible “flat-type” sensor wires. Made from tough yet easy-to-bend wire the sensor harnesses make for tidy wiring and the highly flexible design reduces unwanted tweak when used in pan cars. The wires come in seven different length including 50mm, 75mm, 100mm, 125mm, 150mm, 175mm and 200mm, ideal for all applications from 1/8th to 1/12th scale.
Source: Vampire Racing [vampire-racing.com]
