Red RC » P Off Road

February 22, 2024

FlySky Noble NB4+ Transmitter

Having published preview images of the new Noble NB4+ Transmitter from FlySky last month, the much anticipated radio has today gone on official worldwide release with FlySky publishing its full specs. Highlights include the 2CH (Ultra-fast) mode, with latency below 3ms, ultra-low latency, allows users to precisely control responses in every critical moment and place themselves at the peak. An improved 3.5-inch 320*480 resolution IPS high-brightness outdoor display can be used under strong outdoor light, and its dazzling brightness cannot be conquered even by the limits of sunlight. The NB4+ controller features a “Removable” internal battery design, equipped with a standard large-capacity, high-quality 18650 battery. With a charging base, it can achieve over ten hours of ultra-long endurance, even in the face of RC marathons. The 3450mah battery means NB4+ has longer life of half an hour, has slower attenuation rate, has larger capacity.

Continue reading here and view screen menus

February 21, 2024

Xray XB2 Delta 2C Light Body

New from Xray is the Delta 2C Light body shell for its XB2 1:10 2WD Buggy. The Carpet version of the new XB2 body is designed for higher traction conditions with its profile improving the stability and corner speed without rolling too much. The lightweight version of the Delta body is produced from thinner 0.5mm Lexan material for reduced weight which helps to improve stability in fast corners, chicanes and helps with rotation in tight corners.

Source: Xray [teamxray.com]

February 21, 2024

Hobbywing XeRun XR10 Stock Spec G2 ESC

Reigning Onroad & Offroad World Champion manufacturer Hobbywing has released its latest Stock Spec speedo, the XeRun XR10 Stock Spec G2. A sensored and brushless ESC, it is suitable for Stock Class of 1:10 Touring Car and 1:10 Offroad Racing as well as RC Drifting. Compared with the prevision version of the ESC, the new Stock Spec G2 has increased maximum current rating of 100 amps. This is 20 amps more than the previous Stock Spec. Testing has shown as much as 30°C lower temps under the same loads. The BEC’s continuous output current has been upgraded from 3A to 5A. The centre of gravity of the ESC has been lowered by 14.3%. It has a built in reverse voltage protection and has multi-level throttle and brake curvature, freely adjustable. It supports 79 Settings (10000-88000RPM) RPM limit value selection.

View Specification and more images here

February 20, 2024

JConcepts JCI Warlord Crawler bodies

New from JConcepts are two variants of the JCI Warlord body for 1:10 crawlers. Available as a full tucked body or tucked cab only body, the the Warlord is designed for 12.3” wheelbase vehicles fitting crawlers such as the Traxxas TRX-4 Sport, Enduro, Axial and Vanquish. The Warlord has tucked front and rear fenders to allow clearance for an assortment of tire options while also giving the body shell a very competition inspired look. The new body combines elements from vintage vehicles while carrying some new ruggedness and attitude which JConcepts can provide. In addition, the Warlord includes a roof visor which can be installed separately to give the roof a top and windshield overhang if the user visualises it this way.

View more images here

February 19, 2024

Moto-Obscura B7 Chassis weights

Moto-Obscura is branching into the modern racing market with their newest release of chassis weight plates for Team Associated’s B7 1:10 2WD Buggy platform. Coming in two different shapes, one is for mounting under the servo, and one is for under the ESC & Receiver. They are available in Brass, Stainless Steel, or Aluminium to fine tune the balance of your vehicle. These brushed metal weights are made in the USA and come with the necessary countersunk mounting screws.

View other weight option here

February 15, 2024

Pro-Line Sector 1:10 2WD & 4WD Buggy Bodies

Pro-Line has a new 1:10 body design with the release of the Sector in both a 2WD and 4WD offering for TLR and Team Associated’s latest competition chassis. Available to fit the 2WD TLR22 and Associated’s B6.4, and in 4WD the 22X-4 and B74.2, the Sector lineup of race bodies features a ground-up redesign to optimise the handling of your buggy in the trickiest of track conditions. The low-slung design features a laid-back windshield and long centre fin for ideal stability and side bite, lowering your lap times. The overall rake of the body contributes to the planted yet drivable feel of the Sector, while the body has the right amount of clearance around the gearbox, chassis, and bulkhead. Included with the Sector body is the Air Force 7″ Wing with its ultra-wide wing design a perfect blend of downforce and low drag, with durability and tunability built in. Ample tire clearance is designed into the outer edges, along with 2 diagonal ribs to keep the wing true at high speeds. The trailing edge of the wing features 3 rear chord trim heights to tune to your specific track conditions. Each body includes a 2-pack of wings formed from ultra-durable 1mm thick material.

View more TLR22 body images and AE B74.2 example here

February 14, 2024

MonacoRC iCharger Bag with Flexible Rubber Tray

Continuing to extend the uses for its Bag range, MonacoRC has released a version with a Flexible Rubber Tray for the iCharger 408/456 and iCharger DX8. The MonacoRC Flexible Tray is produced in rubber through the use of 3D printing. This innovative alternative to the traditional foam insert gives the product a more distinctive and stylish appearance. The elastic properties of the rubber ensure optimal protection for the charger inside the bag. MonacoRC has revolutionised the transportation of materials in the RC world with its exclusive line of bags. The new MonacoRC Bag Small V2.1 stands out for its attention to detail: the interior is adorned with an elegant tone-on-tone red MonacoRC logo print, enhancing the quality of the finish. In addition to the practical tone-on-tone red mesh inner pocket (for the Black and Red version), the exterior is enriched with a MonacoRC label, maintaining the elegant simplicity that has made the bag so popular. The series is available in three sizes, easily distinguishable by the colour of the zippers.

iew more images here

February 14, 2024

Avid B7 Ringer Titanium Turnbuckles

New from Avid Racing Concepts is the Ringer Titanium Turnbuckles for the new Team Associated B7 1:10 2WD Buggy. The US brand’s first dip into the turnbuckle market, the Ringer Titanium Turnbuckle is currently available for the B7 with all other modern 1:10 scale vehicles arriving in March. Creating a unique design instead of merely replicating the JC Fin style, which dominates 95% of the industry, proved to be an arduous task. It took one year and four design iterations before they arrived at the distinctive Ringer style. These feature a shiny black finish with silver highlights making them pop on your vehicle like no others on the market due to their trademark round Ringer design which reflects more light than your traditional flat surface cuts. They have also incorporated their logo machined into the centre on all four sides so it won’t wear off over time and makes it easy to determine which direction tightens or loosens, the A-Arrow turning forward tightens the turnbuckle.

Source: Avid [avidrc.com]