Losi announce the new Micro Truggy RTR 1/24 scale micro-size truck. The 156mm long vehicle features 4WD, shaft-driven transmission, adjustable coil-over shocks, micro all-terrain Kingpin tyres, threaded suspension pins, and a 2-in-1 ESC/receiver combo. Included in the RTR kit are a 27MHz radio set, 4.8V NiMH battery and Peak-detection wall charger.
Click here to view the features
Now available from Answer-RC are 48dp double hard coated pinion gears. Each one is individually machined from 7075 aluminium and double hard coated for reduced wear. Depending on the size the pinions weight between 0.9g for a 14T and 2.1g for a 30T, sport a spare grub screw hole and even come with a spare screw.
Source: Answer RC [answer-rc.com]
Airtronics introduce the TLS-01 telemetry data logger to real-time display and record parameters like temperatures, speed, RPM, steering and throttle input and more. Compatible with the MT-4 2.4GHz telemetry transmitter and – with limitations – also the M11X, MX-3X, and other Airtronics FHSS3 surface systems, the data logger gives you knowledge of how the car handled and even how you drove and allows to compare data in a spreadsheet or database environment on a computer via Airtronic’s Windows-compatible interface system.
Click here to view the features
Xceed RC soon release two new starter boxes for on-road and off-road cars. Sporting a dark green anodised aluminium case with with flip top the boxes feature a strong 775-size motor, harness set for NiXX and LiXX batteries, integrated on/off switch, a durable rubber flywheel, ballraced Kevlar-reinforced belt and mechanics, foam padding and universal positioning mounts. The off-road starter box also comes with a slightly raised bottom support bracket to give more clearance for buggies and truggies.
Source: Xceed RC [xceedrc.com]
Xray have a new progressive spring set for the XB808 off-road buggy available. The ultimate-match front and rear springs sport progressive characteristics for a soft initial feel and increasing hardness while the spring compresses. This makes for a sensitive damper behaviour but enough stiffness to retain a precise overall feeling. The springs are recommended for medium-high traction tracks, are available as a pair, are measured, controlled, inspected and matched to provide identical damping characteristics. The front progressive C=0.7-0.8 mimics a hardness 0.7 spring at the beginning of the compression and a hardness 0.8 spring at the end. The rear progressive C=0.5-0.6 behaves like a hardness 0.5 to hardness 0.6 spring.
Source: Xray [teamxray.com]
New at Exotek Racing are the Schuur Speed Extreme Spec brushless race motors. Engineered and designed in the USA to ROAR specifications the 540-size motors are available in 13.5T, 17.5T and 21.5T variants and are of a sensored design, come with 12.5mm sintered Neodymium rotor, high quality ball bearings and ribbon style sensor cable. An optimised airflow through the motor makes for cool operating temperatures improving speed and run time.
Click here to view more photos
Team Durango announced the DEST210R 1/10 scale 2WD stadium truck. Based on the DEX210 the truck will make use of Team Durango’s revolutionary “Hybrid” 3/4-gear gearbox that allows to tune the weight distribution and torque orientation without changing the suspension setup. More details will be released very soon.
Source: Team Durango [team-durango.com]
MaxAmps.com is pleased is introduce the smallest and lightest low voltage alarm on the market. Designed to prolong your battery’s life by not allowing the voltage on your LiPo pack to drop too low, this unit plugs directly into the JST-XH style balancing tap on your battery pack during discharge and notifies you when to stop running the pack. It can also be used to check the status of your battery at any time. The unit measures 40x25x11mm and weighs only 5 grams.
Click here to view the features
