The lightweight flywheel & locknut wrench from Yeah Racing is made from tough plastic material and ideal to securely hold 2-shoe or 3-shoe flywheels during clutch assembly. The tool also incorporates a 17mm hex wrench for standard 1/8 scale wheel nuts.
Source: Yeah Racing [yeahracing.com]
Team Associated is pleased to introduce a 12mm hex drive front wheels for the RC10B4 and RC10B4.1 buggies. Available soon or already are plastic wheel hex adapters including shims and drive pins, B4 front axles for hex use, SC10 steering blocks to go with the hex axles as well as white and yellow 12mm hex disc front wheels. The rear hex adapter allows the TLR22 rear wheel offset to be used and the front wheels also fit the Kyosho RB5 buggy.
Click here to view the other new parts
Seen for the first time at the recent 1/8 scale nitro off-road European Championship in Sand/Germany, the new line of RB buggy tyres becomes available very soon. Coming in the form of three different medium to fine threads and in supersoft, soft and medium compound the tyres already showed their performance, with the only 11 lap run of the event was done using the RB Dragon thread. The tyres come either pre-glued on dish rims or as rubber only including a multi-purpose insert.
Click here to view another picture
Following closely on the heels of the 22 Buggy Kit, the 22T Truck Kit will posses the same unique design of the 22 allowing it to be the first truck in the industry to include both a rear and mid motor completion option in the same kit. Having both of these options opens up the potential for the 22T because different parts of the country benefit from different chassis configurations, varying tracks styles and layouts as well as indoor vs. outdoor tracks. The 22 and 22T share a majority of the same parts with about only 15% of the total parts listing being new. The hard anodised aluminium chassis, stadium truck-length 12mm big bore shocks, adjustable front kick, oversized rear outer bearing, bolt-on camber blocks are just a few of the features that make the 22T different from the 22 buggy as well as a force to be reckoned with in 1/10-scale 2WD truck racing. Like the 22 buggy the 22T is packed full of innovation and expert TLR engineering.
Click here to view more pictures
Chazz Sinclair of X Factory got in touch to tell us about their recent progress with the new X-7 4WD buggies they made. This weekend will set a milestone for the Gen 5.1 called prototypes as they are raced in two very important races – one of which is the ROAR National Championship at NorCal Hobbies.
Click here to find out what Chazz has to report about the X-7 buggy
Fastrax have added new moulded inserts for 1/10 scale buggies to their growing range of tyre accessories. Available in three sizes suitable for 2WD front, 4WD front and rear tyres. The inserts are of a medium profile making them a good all-round solution.
Source: CML Distribution [cmldistribution.co.uk]
Bittydesign distributor Ansmann Racing release first information on the Force body shell for the Mugen MBX6. Featuring a cab forward design the body was used by 2011 European Champion Robert Battle at the recent 1/8 scale off-road European championships in Sand/Germany. The body gives the buggy more steering due to its cab design, provides better airflow around the engine, is made from 1.0mm Polycarbonate and available soon.
Source: Ansmann Racing [ar-rc.com]
Hobbywing release a new speed controller for 1/10 scale Short Course trucks and 1/8 scale buggies. The speedo features dimensions of 53.5x36x36mm, is usable with 6 to 12 NiMH and 2 to 4S LiPo cells and has a 760A burst rating. The constant current allows for motors up to 6000kv with 2S LiPo batteries and up to 4000kv with 4S packs. The on-board BEC delivers 6V/3A, the controller features several software programmes and is being programmed using the fans 3-pin connector.
Click here to view another picture
