Reds Racing have released their new R5 .21 Buggy engine, a 5 port powerful and lightweight motor. Thanks to the new long needle carburetor and its new ABC liner configuration, the engine is extremely driveable and is suitable for all types of track. It also features a CNC machined billet piston, hard chromed liner, a separate cooled combustion chamber and Swiss main bearings.
View more details and images here
The TP1430C is a powerful and advanced multi-chemistry charger, discharger and balancing system. With up to 1000 watts of total charging power the TP1430C is equipped to charge, discharge and cycle a variety of 1-14S LiPo, LiIon and LiFe (A123) batteries, as well as 1-40 cell NiCd and NiMH along with 6-48V Pb batteries. The built-in 2-14S LiPo/LiIon/LiFe (A123) cell balancer and included balance connector adapter board are readily compatible with Thunder Power balance connectors and the JST-XH balance connectors found on most other batteries. The TP1430C is capable of charging at rates up to 30 amps offering the ability to charge many of the latest-generation LiPo batteries at ultra-fast rates up to 6C and beyond. Other features include built-in data monitoring and internal resistance measurement, plus the ability to use a standard USB cable to install future firmware updates available for free download from the company’s website.
Click here to view the features
Team Associated has taken all of the refinements from the RC8.2 and have applied them to their electric-power platform, creating the RC8.2e Factory Team Kit. The RC8.2e has already been proven as a winner after TQing and winning the 2011 Sidewinder Nitro Explosion in the capable hands of Ryan Cavalieri. The RC8.2e Factory Team Kit has a long list of new performance parts, making for the best and lightest Associated EP 1:8 scale buggy to date. The RC8.2e starts with the Factory Team +3mm 7075 hard anodized chassis. The new chassis and side-guards shed over half an ounce along with adding 3mm of length to optimize weight distribution and overall handling.
View more details and images here
Pro-Line have released these aluminium 12mm Front and rear clamping hex adapters for the B4.1. If you just converted your B4.1 to 12mm hexes, then Pro-Line’s clamping hexes are a must have for all serious racers. These hexes clamp on to the axle and will not fall off when you change tires like the plastic hexes. Made from high quality, aircraft grade aluminium so you know that they will last and stand up to the power of your B4.1. Pro-Line have also released their popular Blockade tire in pre mount form. Available in M2 (medium) and M3 (soft), they come pre glued to V2 white wheels.
JQ Products have released a number of new parts, sway bars, clutch bells and options for THE Car. Firstly there is all new stronger plastics which include new wishbones front and rear, C-hubs and ball joints. JQ have also released a new line of clutch bells in 13T, 14T, 15T & 16T versions to allow you to fine tune your clutch to all conditions. Next up is a new smooth gearing set that was tested in various race conditions by their team drivers, which makes the car more consistent and easier to drive. Other new parts include a pair of lightweight servo saver posts and a range of sway bars in 2,6mm front and 2.6mm, 2.7mm, 2.9mm & 3.0mm rear versions.
French company Hobbytech have introduced their latest version of their STR8 buggy, the X2 EP. As the name suggests, this electric brushless powered 1/8th scale buggy features correctly balanced and optimized weight distribution and comes pre assembled as a race roller. Some of the features include CNC machined hard coated Spiral cut gears, 16mm big bore oil-filled aluminium threaded shocks, two piece motor mount for fast motor maintenance and new innovative battery tray design 3S or 4S or 6S LiPo capability.
S-Workz have announced that their S350 BK1 2012 version is now available. Based on the original car, the new kit now comes with the 4mm longer chassis and also 3mm longer chassis brace. This will give the new BK1 more steering and make it more stable. The 2012 kits will also include a new fuel tank cap system which features a double o-ring for more pressure for your engine system. The new chassis plate and brace can also be bought as a set to upgrade your current buggy.
View the new chassis and brace here
Mugen Seiki have announced the MBX6R based off the ultra successful MBX6 buggy. The 6R contains many high performance parts that the Mugen Seiki design team have created. The buggy comes equipped with a new 5mm longer had anodized chassis and a forward mounted receiver & battery tray, something which we have seen previously. The combination of both new items will improve handling in all bumps and jumps and the increase in stability means you can drive the MBX6R harder and faster. To further improve the handling a new set of front and rear damper springs and chassis braces are included. An aluminium rear toe in block with various toe in and anti squat adjustments and an aluminium front upper suspension arm holder with adjustable roll centre positions will keep the car dialed into all race conditions. The give the new buggy the finishing touch it comes supplied with the newly designed Force cab forward body from Bitty Design in Italy.
View more images of the car here
