Red RC » P Off Road

July 15, 2009

Racers Edge 1 degree Associated rear hubs

Racers Edge have released their new 1 degree rear toe in aluminium rear hubs to fit the Associated B4, B44, T4, and SC10. Designed after the stock B44 4wd buggy hubs but with a larger outside bearing for increased performance and bearing longevity, a setscrew holds the hingepin in place with access from the bottom, while four possible vertical ball stud locations allow for increased setup adjustments. Available in a hard anodized silver color, CNC machined for accuracy, and laser engraved with degrees and L or R for left or right sides.

Source: Racers Edge [racers-edge.com]

July 14, 2009

Hot Bodies Lightweight D4 body

Hot Bodies have released this lightweight body shell for the Cyclone D4 or D4 WCE. You’ll experience huge weight savings with this thinner polycarbonate version of the standard weight body shell for faster acceleration, better braking and improved handling. Every HB body shell features clear overspray film, clear and blemish-free polycarbonate plastic, a full set of die-cut detailing decals, a range of Hot Bodies decals and large racing wing to fine-tune the performance of your new body shell.

Source: Hot Bodies [hbeurope.com]

July 13, 2009

HPI Racing Cyber 10B option parts

HPI Racing have released a huge selection of new option parts for the Cyber 10B, that are now available for racers and bashers wanting to optimize the tuning capabilities of the buggy, or make it even faster for club racers. Used properly and with the right skills, the Cyber 10B can put more expensive race-bred 4WD buggies in their place and with these cool new options you can get the ideal dialed-in setup for your local track. The new aluminium parts include a motor mount set, a centre bulkhead, an upper centre bulkhead, 1 degree rear hub carriers and 13 degree front hub carriers.

Click here to see the other parts

July 13, 2009

Xray Active Center Differential bevel gears

New for their active center differential, Xray have released large bevel gears in 43T, 42T & 41T which have been machined from special Hudy steel material that has been specially developed for gear-type products. They have been additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. The gears are individually machined on a precision German gear machine and every gear is individually tested, inspected, and run in. The diff gear is then laser engraved with for easy and instant recognition. Their special heat treatment makes the gear very hard and strong not only on the surface but also in the core, thus give the gear an extraordinarily-long lifespan with very low wear comparing to standard gears.

Source: Xray [teamxray.com]

July 10, 2009

ABEC35 Type-X ball bearings

ABEC35 have announced that their latest Type-X ball bearings for 1/8 nitro buggies and truggies are now available. Featuring special radial play to best fit plastic/composite parts, they sport medium and light grey shield colors for easy identification. With the exception of the clutch sizes, the grey shields are greased unlike the red and orange ones, and are ready for serious off-road actions. Available in a wide range of sizes they will fit most off road chassis’.

Source: ABEC35 [abec35.com]

July 9, 2009

Associated SC10 Bully Dog & Readylift replicas

Team Associated have released 2 more new replica body shells for the SC10, and which will also fit the Traxxas Slash. The SC10 Officially Licensed Short Course bodies are designed to look just like the full-sized race trucks that run in the Lucas Oil Off Road Racing Series throughout the southwest. The new bodies are the Bully Dog and Readylift versions.

Click here to see the other shell

July 6, 2009

Xray Lightweight Centre Diff Outdrive adapters

Xray now offers lightweight CNC-machined centre diff outdrive adapters. Made from Hudy toughened steel, the outdrives have been strategically machined to be lighter than the standard outdrive adapters. CNC-machined on precision German long-turn machines they have been additionally ground and strategically lightened to reduce rotating weight, then further hardened to ensure maximum strength and extra-long lifespan. Final precision hand-grinding ensures a very high tolerance and a tight fit in the diff body and diff gear.

Source: Xray [teamxray.com]

July 5, 2009

Axial Racing 32RR-1 Nitro engine

Axial Racing have released their new 32RR-1 nitro engine. Based on the popular .28RR, this engine is designed to be more efficient and output more power than the previous .32 engine while still delivering monster torque. Featuring a true ABC sleeve construction for durability, a balanced crankshaft for improved RPM & efficiency and a composite 9.0mm slide carburetor that includes 8.0 and 8.5mm optional air venturi’s, the new machined aluminium cooling head features increased surface area for better cooling.

Click here to see the engine’s liner