Red RC » P Off Road

June 20, 2008

Xray XB808 Alu Steering Blocks

Xray have announced the release of these new steering blocks for the XB808, which have been CNC-machined from premium Swiss 7075 T6 aluminium, and then hard coated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Smart Xray engineering includes use of composite bushings to secure ball-bearings in both sides of the steering block, allowing perfect fitting and smooth operation to ultimately impart much higher lifetime compared to bearings installed directly into aluminium steering blocks.

Click here for more photos… content

June 18, 2008

Xray XB808 Clutch Bells

Xray have released a new range of clutch bells for the XB808, manufactured on a precision manual gear machine from Hudy gear steel, a material specially formulated and developed for use in gears. Heat treated for highest strength, minimal wear and extra-long lifespan, the XB808 clutch bell features unique oversized ball-bearings designed and engineered by Xray. Replacing the standard 5×10 bearings with 1.3mm balls, the oversized 808 clutch bearings are 5×12 with 2.0mm balls and extra-thick bearing walls. This translates to higher load-carrying capabilities which will increase the life of the bearings and reduce the risk of clutch bearing failure during long final runs. The bearings come with special high-temperature resistant grease to ensure proper lubrication during high-revving engine operations and long runs. Available in sizes of 15T, 16T, 17T and 18T.

Click here to see more pictures… content

June 18, 2008

RB Concept ST28 RotoStart Engine

RB Concept in France have released the new ST, a .28 big block mill using the same design as their RT line-up. The engine features an ABC 3 port liner and comes with the strong, resilient MSC reinforced crankcase. Also a standard feature included is a roto-start system for ease of operation. The adjustable position of the starting nuts allows for the engine to be mounted in practically all chassis’.

Source: RB Products [rbproducts.com]

June 17, 2008

JConcepts Illuzion Xray 808 body

New for the Xray XB808, JConcepts have released the Illuzion – Scoopless body, whose styling presents a smooth yet detailed design while incorporating many of the features from the original Scoopless body for the RC10B4. Race inspired aggressive styling, Illuzionized cab and durable design are just some of the features that make the new Illuzion Xray 808 body stand out from the rest. Made from clear heavy-duty thickness polycarbonate, it comes supplied with protective film, window masks and detailed Illuzion decal sheet.

Click here to see more angles of the shell… content

June 17, 2008

Losi Tuned Flex 8ight-T Chassis

Losi have released this Tuned Flex Technology Chassis for the popular 8ight-T truggy, having been previously available for the 8ight buggy. It has been milled at exact points to give more flex to the chassis while not sacrificing chassis flex at the gear mesh, which greatly improved overall traction and stability on all track surfaces and has been vigorously tested worldwide by Losi drivers Adam Drake, Mike Truhe and Yannick Aigoin. This lighter chassis will reduce the vehicle’s overall weight to provide increased acceleration and better handling.

Source: Losi [losi.com]

June 17, 2008

Pro Line Velocity V2 Wheels

Also new from Pro Line are the Velocity V2 wheels, that are Larger in diameter and width than previous wheels to give your car more traction and stability. The V2’s are 1.3mm wider and 3mm taller than the traditional size 1:8 wheels, which transfers into a stiffer side wall for less side wall flex enhancing stability and connectivity with your 1:8 buggy. This is achieved by using the same size 1:8 tires that you use now. Simply stretch standard tires over the V2 wheels and you’re ready to go. Additional features include an integrated hot runner system when the wheel is produced, which allows the wheel to be moulded to the tightest of tolerances and the ultimate in trueness.

Source: Pro Line [prolineracing.com]

June 17, 2008

Pro Line Hyper 9 Crowd Pleazer 2.0

The Crowd Pleazer 2.0 body has proven itself to the highest performing body on the market as a well established performer. Now Pro-Line is continuing the legacy with the release of the Hyper 9 Crowd Pleazer 2.0. Certain to provide racers with the ground breaking design cues they demand in a body, it incorporates ultra-low styling, original body lines, and functionality to bring you the latest in high performance race technology.

Source: Pro Line [prolineracing.com]

June 17, 2008

Pro-Line Vortex for Kyosho Lazer ZX-5

Get ready to cool those high voltage brushed or brushless systems in your Kyosho Lazer ZX-5 with the new Vortex body by Pro-Line. Designed to give your car the latest in off-road styling and function, the Vortex was born from today’s top electric racer IFMAR Off-Road World Champion, Ryan Cavalieri. “We need a body that will better cool the brushless systems we are using and looks like it is ready to compete,” says Ryan Cavalieri. So, Ryan, along with Pro-Line’s body moulding experts, set out to create something that improved the overall performance of the car’s electronics and the car’s performance on the track. With 4 unique cooling features (1 on each side of the body, 1 directly underneath the front wind shield, and 1 on top of the cab), the Vortex received it’s name.

Source: Pro Line [prolineracing.com]