Red RC » P Off Road

October 20, 2009

GRP Endurance buggy tire

MRP, makers of the GRP tire range have sent us details on their full range of buggy tires. Most you have seen before, but new from the Italian company is the Endurance (first from left, click to make bigger). This is a very rounded tire with very big and low pins, ideal on flat, clean and very blue groove surfaces. It has a plain structure which makes it very smooth and fast on high grip tracks, where with traditional tires, the car tends to roll over easily, making driving very difficult. Its very long life pins makes it an unbeatable tire for all finals, also on high wear tracks. Also suitable for use on asphalt such as on road tracks or car parks. As with all the tires they are available in a variety of compounds, with a variety of inserts.

These tires along with the complete range of GRP products are available now at their new online shop.

October 17, 2009

Mugen Seiki LD Buggy wheels

Mugen Seiki have released a new type of wheel for their MBX-6 buggy. Suitable for other makes of buggy with the same axle, the new LD wheel has a 3mm larger diameter and 1mm larger width than the standard wheels. These dish style wheels are available in both yellow and white.

Source: Mugen [mugenseiki.com]

October 15, 2009

Team Orion CRF .21 Mike Truhe Edition engine

Following on from the news earlier in the week in which Mike Truhe was spotted running a new black headed motor in recent testing, Losi have announced the release of the Truhe Edition 21 ceramic buggy engine. Designed by renowned engine expert Adrien Bertin with feedback from Losi driver Mike Truhe, the Team Orion CRF .21 Mike Truhe Edition motor delivers the ultimate combination of speed, torque and fuel economy. This high-performance competition-level engine for 1/8-scale buggies and truggies features a patented CRF crankshaft, a 5-port ABC piston and cylinder, a custom-machined and lightened cylinder head, an aluminum twin-needle, a slide-valve carburetor with replaceable venturi inserts and an aerospace-quality ceramic rear bearing.

Click here for the specifications

October 14, 2009

Tekno RC D8/T & Losi wing mount & Shock towers

Tekno RC have announced some hot new products for the Losi 8 and Hot Bodies D8 line of 1/8th scale vehicles. First up is the new adjustable wing mount for the Losi 8B/8T (and D8/D8T/Ve8). A direct fit for the Losi it is made from an extremely durable plastic composite and has adjustable angle and height. No more body clips to hold on the wing, instead screws take up this task for a tightly fitted wing. The new wing mount is also designed to fit the Hot Bodies D8/D8T/Ve8/Vorza line using of one of their 3 new shock towers. The new rear shock towers are machined from 5mm thick 7075 T6 aluminium and are lighter and stronger than stock and are hard anodized for a sleek appearance. By using the bulkhead as an attachment point for the wing rather than simply attaching it only to the shock tower, the new wing mount and shock tower combo is far more durable than stock. Finally there are two separate towers for the D8/Ve8/Vorza buggies, a standard stock replacement and one for the optional 112mm shocks. All of these shock towers accommodate the new Tekno RC Adjustable Wing Mount, the stock wing mount, or the Losi 8 wing mount.

Click here to see the shock towers

October 13, 2009

Losi Covered 17mm Wheel nuts

Team Losi have released 4 new sets of 17mm aluminium covered wheel nuts, which are now available for 8ight 2.0 buggies, 8ight-T 2.0 truggies and the LST XXL monster truck. These wheel nuts will also fit any other 1/8-scale off-road buggy or truggy that uses a traditional 17mm wheel nut/axle design. The covered design of the wheel nuts eliminates dirt from getting into the axle and are available in aluminium, red, black or blue.

Source: Losi [losi.com]

October 11, 2009

VP Pro Bull Dog buggy tire

VP Pro have released their new offroad buggy tire, the Bull Dog. This sharp tire offers superior grip while the wear rate remains very low and is available in low flexx, medium flexx and ultra flexx compounds for suitability in a wide range of different track and weather conditions.

Source: VP Pro [vp-racing.com]

October 9, 2009

Phat Bodies Zen & Blackjack shells

Two new shells from Phat Bodies for both the X-Factory X-6 / X-6 squared and the LRP Shark ST. The new Zen shell has been revamped and made better for the X-Factory car and sports a new sleeker shape and made lightweight by using 0.8mm thick polycarbonate in place of 1.0mm and comes supplied with a front wing. For the smaller scale, the new Blackjack is a mini short course body which captures the look of the class very well and is supplied in 0.8mm thick polycarbonate.

Click here to see the Blackjack

October 8, 2009

Losi DLM2 Rubber dirt oval racing tires

New from Losi for their 1/8-scale L8ight dirt oval racer are these low profile DLM2 rubber dirt oval racing tires that provide the traction needed for oval racing, and meet the proposed ‘Spec’ racing rules. The tires come mounted on white 1/8 buggy dish wheels, include a precision foam inner liner, and will fit all 1/8-scale vehicles with 17 mm hexes.

Source: Losi [losi.com]