Red RC » P Off Road

September 17, 2009

Nova Plus 21-4C LE Buggy engine

Novarossi’s Plus 4 Buggy engine has been very successful for the Italian company with a second place at the European Championship as well as winning the ROAR nationals in the USA. Aiming to further improve the engine the new Nova Plus 21-4C is the result of close collaboration between their factory drivers and the engineering department at Novarossi World S.r.l. Using the Plus 4 Buggy engine as a starting point they worked to improve the throttle response, lower fuel consumption and give it a better driveability by fitting a lighter tuned crankshaft in combination with a ceramic rear ball bearing. Note that the new Plus 21-4C is a limited edition of only 600 pieces and is available right away.

Click here for images of the internals

September 9, 2009

X-Factory X-6 and B4 front axles

X Factory have announced new front axles to fit both the X-6 Squared and the RC10B4. B4s are sold with steel front trailing axles that secure the wheel with a nut. The nut protrudes from the front wheel and can catch on things. The new X Factory trailing front axles are hardened steel so they won’t break and secure the wheel with a button head screw. Made for X Factory by M.I.P., the new axles are completely drilled through the center so they each weigh just 1 gram more than the aluminum FT axle. The package contains two axles and four button head screws, X Factory’s axles are secured in the car with a screw instead of an E-clip, so each pack contains everything needed for both sides of the car.

Click here to see the axle mounted

September 5, 2009

Pro-Line Closed cell Foam inserts & new tire options

Continuing on with the recent releases by Pro-Line, the US company have introduced some new items for 1/8th scale off road vehicles. First up are these closed cell foam inserts that feature channels to capture the tire so the carcass flex is kept to a minimum. This removes air gaps in between the tire and ensures it is perfectly balanced. This can also be re used which is just in time for Pro-Line’s next release which are ‘a la carte’ tires that means you can now buy your favourite thread and compound in a set of 4, without foam. Finally you can now also get your favourite VTR 4.0″ threads pre mounted on zero offset yellow and white Velocity VTR rims.

Click here to see the other products

September 4, 2009

Pro-Line Slash Bumper, Skid plates & Undertray

More new items from Pro-Line Racing who have released some new products for the popular Traxxas Slash. First up is this range of protectors for the car which include a front bumper as well as front and rear skid plates. Made from extremely durable nylon material they are a direct replacement and offer added thickness throughout for longer bashing life. Also new for the Slash is a lexan undertray which fits directly onto your Slash and protects against dirt and debris from entering into the chassis and electronics.

Click here to see the Slash undertray

September 4, 2009

KM Racing HB D8 Rear uprights

KM Racing continue to release new products, this time for the World Champion Hot Bodies D8 buggy. They have produced a new hard anodized aluminium rear hub for the car, that increases the stability and strength in this area, compared to the standard version. Available in both 0 and 1 degree toe-in versions.

Source: KM Racing [km-rc.com]

September 3, 2009

KM Racing MBX-6 option parts

More new items from KM Racing, this time for the European Championship winning Mugen MBX-6. First up is this aluminium centre diff housing which has been hard treated and helps increase rigidity as well as allowing the smooth and efficient movement of the differenial. Next up is a new 1.8mm thick lightweight brake disc, that claims to enhance the braking force. Finally there are 2 new hard anodized aluminium rear hubs that are super stable, and come in 0 and 1 degree versions.

Click here to see the other parts

September 1, 2009

ABEC35 Engine & Thrust bearings

Ball bearing company ABEC35 have released version 2 of their 7x19x6mm engine bearing. This new type features redefined radial play and inner diameter and each bearing comes with 2 contact rubber shields (1 black & 1 blue) and is greased. Suitable for off road conditions and if using them in on road simply take the blue shield away. Another new product is their thrust bearings (F5-10M 4.8/5.0) for Kyosho push type clutches. Comparing to the previous clutch bearings (F5-10M 5.0/5.2) they have over size balls, 9pcs x 2.0mm, for extended life.

Source: ABEC35 [abec35.com]

September 1, 2009

X-Factory X-6 Squared Plastic Flex chassis

X-Factory have announced the release of this new ‘plastic’ chassis for the National Champion X-6 Squared buggy. The first ones were ready just two weeks ago and were rushed to the Team for testing and Tom Cockerill used one to take a convincing win at the Blythe UK National. The new chassis is made of the same material as the original ‘graphite’ version, except that the carton fibres are replaced by fiberglass giving it a bit more flex. X-6 Squared kits will continue to be supplied with a graphite chassis, and the plastic ones will be available as an option.

Click here for another image of the chassis