Red RC » P Off Road

June 29, 2007

Kyosho release Evolva & MP777 Optionals

Kyosho France have a number of new optionals for the Evolva and Inferno MP777 displayed on their website that have just been made available. First up for the Evolva are these pretty cool looking setup wheels, which are pretty unique in that its rare to see them for 1/8th circuit cars. They are sold in a set of 4, feature a rubber o-ring around the circumference and are anodised grey. Next up, again for the Evolva, are some lightweight wide off-set front wheel axles that come supplied with spacing shims, we presume to enable you to set the amount of offset required. For the MP777 come some anodised wheels nuts in brown, red and blue and also available are aluminium steering blocks, that feature nylon inserts for using smaller bearings.

Click more to see the other parts… content

June 27, 2007

GRP release new Truggy wheels

Italian tire makers, GRP, have announced that they will release an additional range of wheels for truggy racers, to be sold alongside their current versions. The new wheels have a bigger Offset (1/2′), compared to the original versions that come with a standard offset, which ensures that all the different models of truggy currently present on the market are covered. Also announced is that both standard and bigger offset wheels are available in the original fluorescent yellow and now also in while, meaning there are now 4 different types of truggy wheel from GRP.

Source: GRP [grpgandini.com]

June 25, 2007

HB Cyclone D4 – New shock bodies

HB Cyclone D4 - New shock bodies

Hot Bodies have announced on their buggy blog site that they are working on a new coated shock body for the Cyclone D4. This coating aids the movement of the piston in the body by reducing the friction for the piston, while the coating also provides a scratch resistant surface. These new parts are now currently in testing and initial running has proved positive, more information should be released later.

Source: HB Buggy Blog [hbbuggy-blog.com]

June 25, 2007

Vita Tuning Big block clutch

Vita Tuning have released information about their new big block clutch, which is suitable for use in truggies. This clutch was successfully tested last weekend at the first round of the German truggy Nationals, and Dario Vita, racing a Mugen, won the event with this clutch which was also being used by the Reckward brothers and other top racers at that event. The release date is yet to be set.

Source: Vita Tuning [vita-tuning.de]

June 24, 2007

Atomic Carbon Ultima RB5 shock towers

UK based carbon fibre specialists Atomic Carbon have announced the release of these new Kyosho Ultima RB5 shock towers. Made from 4mm carbon fibre these front and rear shock towers have been developed in conjunction with Team oOple team driver Stu Wood.

Stu using the atomic carbon shock towers managed to qualify 7th out of 130 drivers, at the recent BRCA national held at Bury Metro and this is the 1st time in 15 years that a Kyosho 2wd car has made a BRCA national A final.

Click here to see the front tower… content

June 20, 2007

ATS Tires & Accessories

Italian tire manufacturer ATS have announced the release of a number of new products for both off road and general use. First up are these very unique foam truggy tires, created in 56mm width and in 130mm tire diameter, they will be available in both hard and medium compounds and should allow your truggy to tear up the tarmac. Next up is the announcement that ATS will enter the buggy tire market and they are currently testing rims and compounds and will launch with 3 compounds called Sticky, Adherence and 1600, expect to see them available soon. ATS have also released a range of clutch bell housings for off road and rally game that come in both closed and open finish and in a number of different teeth amounts. Finally comes the release of cleaning putty, similar to that sold by Serpent, that comes in a handy little tub and helps remove oil and other crap from your car.

Click here to see the other products… content

June 20, 2007

Riemon Speed Works metal optionals

We brought you information about shock bodies from Japanese firm, Riemon Speed Works before, and today they have announced more metal optionals, including more shock bodies. In the picture above you can see on the left, new metal shock bodies for the Kyosho Lazer ZX-5, the left shock body being a prototype made from brass and the aluminum version on the right the final sale version. In the middle of the image are the prototype and final shock bodies for the Tamiya M-chassis while the final product on the right are hex adaptors for 1/10th touring cars, which have been made from brass to apparentley help transfer the power from the tires to the ground in low grip conditions. Available this month.

Source: Riemon SW [muscat-s.com/riemon]

June 20, 2007

JConcepts Illuzion Losi 8ight T body

JConcepts have released their latest Illuzion body, this time for the Losi 8ight T truggy which features a stadium truck style that combines hard edge racing lines with a front hood scoop. The roof of the body has been dramatically wedged or for that aggressive look, while the rear of the body has been designed for extra bed durability. The body has been made from heavy-duty thickness polycarbonate and comes complete with window masks and protective film.

Click for more photos… content