September 4, 2023

Leadfinger Racing A2 Tactic B6.4 Body

US offroad bodyshell producer Leadfinger Racing has introduced their new A2 Tactic body and turf wing for the Team Associated B6.4/B6.4D 1:10 Buggy.  The new body is the key component whether racing on carpet, turf or dirt.  The A2’s straight-line design and strategically built side pods provide the B6.4 with precise maneuverability.  The raised fin positioned down the centre of the body stabilises the B6.4 under full punch and high-speed passing situations.  For more level jumping and quicker landings, a perfectly sized swoop at the back of the body assists air flow over the rear tower and helps guide it to the included “Sniper” turf wing.  To ensure a safe return home after your victory, the body has been made from light weight and durable polycarbonate.  This will also protect your B6.4 for many more battles to come should you be called to serve once again.

View more images here


August 28, 2023

JConcepts Spring box double decker w/foam liner

JConcepts has introduced this spring box to assist racer the organisation of their spring selection.  The double decker design stores up to 18 pairs of springs plus 2 added compartments on each layer for miscellaneous items.  The injection molded box itself has been in the JConcepts line-up for years assisting in motor and battery storage with a nice closure and stealth black colour combination.  The box now makes a nice and tidy space with high density foam layered with compartmentalised section and blue floor space to aid in a visual cue to identify springs quickly.  The package includes a decal for the inside of the lid for the racer to write in notes, combinations, spring rate and type, to further trackside organisation.  The spring box is ideal for 1:10 off-road, and on-road racers looking to tuck away their setup secrets and keep them protected in style.

View more images here


August 28, 2023

ProStar RC Tekno 1:10 Alu Bulkheads

American based ProStar RC has released these new Aluminium Bulkheads intended for use on the 1:10 chassis offerings from Tekno. Suitable for the SC410SL, ET410, EB410, & .2 versions, as well as  the SC2410T Short Course Conversion by ProStar RC, the are produced from T7 Aluminium and gold anodise finished.  Laser engraved with the ProStar RC logo the bulkhead upgrade weights 44 grams and offers much greater durability than the kit standard part.

View more images here


August 25, 2023

Factory Team Diff Decoder

Factory Team has released a Diff Decoder which is says is an indispensable tool for the hardcore racer.  The Diff Decoder displays a consistent, measured value for differential hardness rather than relying on an estimation or feeling. This measurement can be used to build differentials to a specific hardness, fine tune to improve vehicle performance, understand the differences between oil brands and temperature, or to replicate an existing differential.  The Diff Decoder’s machined aluminium body is compact and lightweight with a 5-digit LED display suitable for measurement of a wide variety of differentials. Includes three adapters: one 1:10 7mm hex to measure at the wheel, and 1:10 and 1:8 pin adapters to measure at the diff outdrive.  A 5V power source is required to operate.

View image in use here


August 25, 2023

Takashima 2.4G Wireless Receivers

Hong Kong’s Takashima D-13 has launched two 4-channel 2.4G wireless receivers.  The RX-492 receiver supports the Sanwa FH-5 mode, while the RX-482 receiver supports the FH-4 operational mode.  Both products weigh only 7g and are 28×20.5×18.5mm in size making them a highly cost-effective alternative choice.

View more images here


August 24, 2023

SWORKz S35-4 EVO

Sworkz has a new 1:8 Nitro Buggy with the release of the S35-4 EVO.  The geometry from the Worlds Edition conversion kit provides optimised cornering speeds with a more easy handling feel and maximum traction.  The S35-4 EVO features a T7075 hard anodised and lightened aluminium chassis with a new short wheel base design that was tested for a long time by our factory pilots which guarantee the best speed balance for both front and rear suspensions.  HET differentials are included in the kit while the High Density Clutch Bell system are optional. The new S35-4 EVO comes with a brand new steering Lay-Down Type Steering Bell crank servo saver system. This new Ackerman design provides the driver with better control over the S35-4 EVO buggy.

Continue reading here


August 23, 2023

Densford & MacDonald complete ROAR Committee

ROAR, the sanctioning body for RC racing in the United States & Canada, has announced the completion of its Executive Committee with the appointments of Brent Densford as Competition Director and Lance MacDonald as Promotions Director.  Under the guidance of new President Clayton Young, ROAR appears to be on a much overdue positive trajectory and the latest appointments should be a boost to national championship racing and the bobby in general.  Densford is the owner of Beach RC while MacDonald has vast experience in race organisation and so their combined experience and knowledge should assist ROAR in being more more proactive in the promotion of the hobby as opposed to just being a rule enforcer.

Read official ROAR announcement here


August 21, 2023

Amped Up RC 2s Balance Charge Leads

Following Donathen RC’s launch of its Amped Up RC range of off the shelve cables, they have released the first 3 products, 2s Balance Charge Leads.  These leads are designed by DRC using DRC proportions, DRC connectors, 10 awg wire, and adhesive heat shrink.  Each lead is fully protected with black sheathing covering all wires, increasing the protection, and lifespan of the lead.  This sheathing can easily slide around with regular heat shrink, that is why we offer these leads with dual wall adhesive heat shrink. Not only does the adhesive heat shrink keep the sheathing in place, it adds durability, sturdiness, and molds to the connection providing the best protection available.  To start, Amped Up RC is offering 3 balance leads, 5mm bullet connectors, Xt90 connectors, and Qs8 connectors 24″ long made with 10 awg wire.  A unique feature of these leads is that they can be used with any charger that uses a JST-Xh balance housing.

View more images here


Mibosport
TargetRC
VP Racing
T-Works