Red RC » P Off Road

April 11, 2025

Invisible Speed Complete Setup Station Pair

Invisible Speed, the platform created in 2020 by Joseph Quagraine to share over two decades of car set-up knowledge through books and online courses, has released its own complete Setup Station Pair, with Measurement Plate, Droop Blocks and Droop Gauge. The tool set is made for 1:8 Nitro and Electric Buggies, and includes many unique features, solving common problems, as well as improving the experience of setting up your car. Features include Camber Angle Wheel Plates that are wide enough to allow for full lock, in order to measure Ackermann, and Bump Steer at different wheel angles. These Camber Angle Wheel Plates rest on ball bearings, allowing for smooth stick free operation, allowing the car to settle at ride height. Droop Gauge with 0 as axle in line with bottom of chassis. Droop Blocks have space for balancing pins, holes to hold shocks or diffs while assembling, holders for soldering battery connectors, and a quick gauge for measuring droop with tyres on your car, 60-70mm steel ruler method.

View more images here

April 11, 2025

JConcepts Cougar LD3 P2 Body

JConcepts’ P2 body shell is now available for the Schumacher Cougar LD3 1:10 2WD buggy. A staple in the Florida company’s product line, the Punisher body shell design, started its time in offroad during the 2010 racing season. Over the course of a decade, the design team along with the racers have helped push the envelope and re-invent the Punisher along the way. The P2 design arrived just in time for the IFMAR Worlds in 2017 where the team tested and confirmed performance characteristics on the Xiamen, China track surface. The body arrives as clear polycarbonate with protective film and is available in standard and lightweight formed thickness. A popular and versatile JConcepts decal sheet is included while a simple instruction sheet covers the basics for new or inexperienced painters.

View more images here

April 11, 2025

VP-Pro IFB8 Nitro Buggy Body

VP-Pro has released a new body for the Infinity IFB8 1:8 Nitro Buggy. Featuring an integrated shark fin on the cab, this helps adds stability and increases high speed handling. The low-slung design also features a laid-back windshield and long centre fin for ideal stability and side bite. Manufactured from lightweight 0.8mm thickness high-quality polycarbonate, the body is comes clear with window masks for painting and official VP-Pro logo stickers.

BView more images here

April 10, 2025

RC-Project RC8B4.1 30g Rear Chassis Weight

New from Italian option parts brand RC-Project comes this 30-gram Rear Chassis Weight for the Team Associated RC8B4.1 1:8 Buggy. The latest weight features a redesigned structure that centralises mass distribution compared to the previous version. This update provides improved stability in high-speed corners and better responsiveness during direction changes. Unlike the previous model with a fixed position, the new version allows for forward weight adjustment, enabling fine-tuning of the mass distribution according to the driver’s specific needs. Additionally, the lower geometry has been revised to ensure a mount that minimises contact surface with the chassis, significantly enhancing the chassis torsion.

View more images here

April 8, 2025

Xray X4 CFF Front/Rear Lower Arms

Xray has released new CFF (Carbon Fibre Fusion) lower arms for its X4 1:10 Electric Touring Car. The lower suspension arms feature optimised flexing under dampening and with the shock being mounted in the middle of the arm, the load is evenly distributed onto the suspension arm, which increases the mechanical traction, and response of the car. Graphite hardness of the lower suspension arms is recommended for carpet tracks and even for some high traction asphalt conditions. These will provide the most consistent handling and will make the car more free in corners compared to when H or M arms are used.

View more images here

April 7, 2025

Xray XB4 Lightweight Steering Block & 7° C-hub Set

Xray has released a new lightweight complete set of aluminium steering blocks and with 7° caster C-hubs for their XB4 1:10 4WD Buggy. 30% lighter than previous version, their ultra-strong construction provides very long life and durability in even the most extreme racing conditions. CNC-machined from Swiss 7075 T6 aluminium and black coated, using the steering blocks in an aluminium material reduces flex, and improves consistency, and will free up the buggy. The set includes all 3 different graphite steering extensions – 1 dot, 2 dots, 3 dots.

Source: Xray [teamxray.com]

April 4, 2025

Hudy 1:10 Offroad Set-up Toolset

Following on from the release of their new Set-up Toolset for 1:10 onoad, renowned Slovakian RC tool manufacturer Hudy has released this set for all 1:10 offroad cars. Pioneers & industry leaders of set-up systems, they have combined all their different tool offerings to created this latest set that includes all tools for complete geometry adjustment. All components are made by Hudy in Europe and are are machined from lightweight aircraft aluminium ensuring the highest precision & superior quality.

View Toolset content list here

April 4, 2025

Yokomo SO 30mm fan shrouds

Yokomo is releasing a 30mm fan shrouds for their SO3.0 and SO2.0 1:10 2WD Buggies. The 30mm fan shroud is attached to the cooling fan to increase the cooling effect of the motor. The motor duct shape has been optimised and will greatly contribute to maintaining motor performance and efficiency in the coming warmer season. A 30mm cooling fan is attached to the chassis via the Z2-CFM aluminium cooling fan stay and secured using the upper hole of the fan – the cooling fan/aluminium fan stay are sold separately.

View image of shroud mounted here