Red RC » P Off Road

December 30, 2021

PowerStar PM-4500W digital crawler servo

PowerStar has introduced a new digital servo for entry level crawling called the PM-4500W. Featuring a full CNC machined aluminium case for the best thermal dissipation and durability it also has a waterproof design with clear signal wire making it IPX7 waterproof and dust-proof. High Torque & Speed, the maximum torque of this short body servo is up to 45 kg-cm @ 8.4V with an operating speed of 0.16sec/60°. Over current and temperature protection is also included.

View the full servo specs here

December 28, 2021

JConcepts RC10T nose piece, bellcrank & nose brace

JConcepts have released three new option parts for the classic Team Associated RC10T. One of the primary differences between an RC10 and an RC10T is the aluminium front nose piece. Made for a longer suspension arm setup, the RC10T nose piece is significantly narrower to accommodate truck specific geometry. Re-creating the masterful item was no easy task given the number of bends and changes in positioning throughout the part. The team at JConcepts took on the challenge for vintage enthusiasts to give new life to a resting generation of Team Associated stadium trucks.

View more details & images here

December 28, 2021

JConcepts pre-mounted Pin Swag & Fuzz Bites

JConcepts now offer their latest carpet tires, the Fuzz Bite front and rear as well as the Pin Swag rear as pre mounts on either white or yellow Mono rims. The Fuzz Bite lands on a low-profile carcass carried over from tires such as the Twin Pin. The low stance provides quick transition at high-speed and minimises side-wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting. The Swag is split down the centre to give a little individual control to contort to surfaces. In between, a stagger section with angular front is placed just behind a vertical rib to complete the design. The tight spacing of the Pin and Swag bite together and minimise wear across the carcass. An already low-profile carcass rolls through the turns and transitions well at high and low speeds.

View the other new pre mounts here

December 26, 2021

O.S. Speed B21 Ongaro Edition

Davide Ongaro has his first Ongaro Edition O.S. Speed B21, having joined the Japanese brand at the start of 2021. Modified according to his own feelings, it is based on the latest O.S. Speed B2104 off-road engine. The crankshaft has been changed to a counter web shape and uses of single tungsten weight specially made for this engine to suit his driving style. The inner head also has a specially designed combustion chamber, and the synergistic effect of these gives a smooth feeling and more powerful top end. In addition, the outer head adopts a standard round type, and sports Ongaro’s original logo mark. A new size φ5.8mm / φ6.3mm black anodised restrictor is also used for the carburettor to create an “Engine that can win big races” that matches his requirements. They will also have a combo set that includes the TB02 (also known as T-2090) EFRA 2089 tuned silencer with MB01-75 (75mm) manifold.

View more images of the Ongaro edition here

December 23, 2021

JConcepts pre trimmed high-clearance wings

Two new High-Clearance wings available pre-trimmed has been developed and manufactured by JConcepts Inc. The 6.5” and 7” wide HCW incorporates a short-chord design for quick rotation and a flat-base which provides more tire clearance. As the carpet, Astroturf, and high-traction dirt conditions become more prevalent, racers have asked for specific 6.5” & 7”rear wings. The durable and pre-trimmed design has chopped rear corners for rigidity plus a traditional lower-level gurney that is achievable for even less drag over large jumps. The side-dams of the wing feature hard radius cut-outs which allow even more tire rear expansion and flex space. JConcepts designers Paul Wynn and Fred Reep added dual stability fangs which also help boost the front to rear structure. The rear of the wing still maintains a high-angle to vertical rear dam to give drivers a straight-forward layout suited to high-speed circuits. The HCW is a direct bolt-on piece for most 1/10th buggies and includes one pre-trimmed wing per package.

View the 7” wide HCW here

December 23, 2021

Mugen Seiki MBX8R Nitro buggy

Mugen Seiki have released the MBX8R buggy, the result of extensive testing and development by some of the best drivers in the world. The team spent a lot of time testing and developing the MBX8R geometry in race conditions throughout 2021, which lead to many major victories, with Ryan Maifield winning The Dirt Nitro Challenge, Silver State Nitro Challenge and ROAR 1/8th Fuel Nationals all in the same year. The MBX8R has many new parts to increase stability, rear traction, improved jumping, and have a wide tuning range. The buggy uses new narrow RF (C) and RR (D) pivot blocks with new pivot inserts for increased tune-ability. Further updates include longer box-shaped suspension arms and arm stiffeners, with the rear arm using an impact resistant material for increased durability. Adjusting the hardness of the lower suspension arms is possible with optional CFRP plates. The rear uprights are also new, the moulded uprights have CFRP plates to adjust rear roll centre. New front shock tower and upper front arm mount use new pivot inserts for increased tune-ability.

View more details & images here

December 22, 2021

Xray XB4’22 1/10th electric 4wd buggy

Xray have presented their new for 2022 XB4 1/10th electric 4wd buggy. Featuring a new chassis layout with centre slipper/diff, motor and battery moved significantly forward makes the car faster and easier to drive on any surface. It sports a unique one-way centre slipper with precisely adjustable slipper for more forward traction, less diving under braking and easier landings. The side guards have now symmetrical mounting to the chassis left and right and the chassis features multiple battery mounting positions with various O-ring diameters for every battery size. Sporting centre dogbones for better performance and less maintenance, their new front & rear diff outdrives with inner O-rings help eliminate damage in high impacts. There is also a redesigned servo holder and shorter radio plate that is fitted directly on chassis so it has no negative effect on chassis flex. The new aluminium centre bulkhead is designed to fit the new one-way centre slipper (carpet version) and the arm lengths for both carpet and dirt versions have been standardised with both kits coming with short length hard front arms and long hard rear arms in the hard composite. There is a new front graphite chassis T-Brace (carpet edition) to increase front stability on high traction tracks, making the car more predictable and easier to drive. The T-Brace is mounted via included aluminium posts to the chassis and to the front lower brace. And finally there is different centre upper top decks included in the Carpet and Dirt versions due to the dimensions of the one-way slipper vs gear diff

View the full XB4 2022 presentation here.

December 22, 2021

JConcepts Mono RC10 Truck front & rear wheels

JConcepts supports the vintage RC enthusiast with the release of new Mono wheels. The original offset wheels for the RC10T have been highly sought-after for years by drivers looking to outfit a restoration project or racers actively racing their vehicles. The 2.2” Mono wheels are inspired by the originals, feature the iconic dish shape with the front utilising the non-flanged 3/16 x 3/8” bearing and the rear the pin drive setup for 3/16” axles. The wheels include a vent hole on the outer diameter and an outer lip to reduce the ability for glue to run down the face of the wheel during application and curing. JConcepts wheels are moulded in a durable material with precise techniques to ensure dependability and performance. Mono wheels are available in bright white and fluorescent racing yellow, packaged 4 pieces per package and backed with JConcepts racing heritage and customer support.

View the other Mono wheel options here