Red RC » P Off Road

August 17, 2021

JConcepts Finnisher magnetic wrench & wheel nuts

JConcepts is making the job of taking your tires on and off a little easier with the release of the Finnisher magnetic T-handle wrench. With the locking wheel nuts of today such as the new JConcepts serrated wheel nuts, the initial spin is always easy, however, once you lock, it’s important to have a T-handle to clinch against the wheel. One of the trends is to feature a magnet inside the wrench to allow for quicker or user-friendly tire changing and maintenance. The wrench is designed so a driver can quickly spin with the tip of the wrench in a conventional style and then move lower to the T-handle portion to lock into position. The main structure of the design is aluminium and anodised blue, while the T-handle is constructed of steel with a black oxide finish attached to aluminium finger paddles for the feel and touch to adjust easier and with less pain. The wrench has etched size and JC logos for authenticity and identification.

View the new wheel nuts here

August 16, 2021

NathoBuilds XB2 & XB4 carbon fibre options

NathoBuilds have released a number of new carbon fibre parts, for the Xray range of EP buggies but also this general purpose 2 in 1 turnbuckle and ball cup tool. The tool allows you to work on a number of 1/10th vehicles with either a 3mm or 4mm Turnbuckles and also has a built in ball cup holder that helps you to build and adjust your turnbuckles. For the Xray XB4’21 is this front top deck that helps keeps the front end rigid, perfect for improved steering in high grip tracks. Also for the same car is this o-ring battery strap that replaces the standard kit taps. The new parts firmly secures your battery, also allowing you to make adjustments on your shorty pack. A similar part is also available for the XB2, the o-ring battery strap is made from carbon fibre along with a 3D printed spacer, which replaces the standard kit taps. The o-ring holds your pack secure enough to keep it in place but also flexible enough to allow for the chassis to flex underneath. Finally for the XB2 is a carbon bulkhead brace, which is a direct replacement for the kit standard aluminium version.

View the other new items here

August 15, 2021

SWorkz carbon 1/8 wing shim plates

SWorkz factory team partner RC Carbon Cavalieri has produced two new carbon options for their 1/8 cars. Available in two different versions, the wing shim plate can raise the height of the mounted wing, 5mm or 10mm, by placing it between the rear wing mount and wing itself. This allows for easy fine tuning of the rear downforce of your car.

View an image of the mounted plate here

August 15, 2021

TLR 22X-4 carbon fibre chassis

TLR have introduced this carbon fibre chassis for the 22X-4 4wd buggy. Weight is the best way to improve the performance of your 22X-4, making the buggy handle better, stay flatter, accelerate harder, brake quicker, land smoother and just go flat-out faster. The 22X-4 2.5mm aluminium chassis weighs around 115g, while the 22X-4 Carbon Chassis weights in at 75-77g – a weight savings of 38-40g. The massive 40g weight savings allows spec racers to run full-sized short batteries at near minimum weight. Unlike most off-road carbon fibre chassis that are cut from flat sheet carbon and require an aluminium front bulkhead for the chassis kick up, which effectively cancels out the weight savings, this carbon chassis is laid and includes the front chassis kick up in the carbon plate so no extra weight is added back on.

View the top of the chassis here

August 12, 2021

T-Works AE, TLR & Xray carbon fibre wing buttons

T-Works have introduced two new carbon fibre wing buttons, a narrow version (20-26mm) for the Team Associated & TLR buggies and a wider version (20-30mm) which also fits the Xray. The 1-piece wing button is machined from high-quality carbon fibre and makes for easier wing mounting, improved looks and better wing support, especially when running lightweight polycarbonate wings. The buttons come has elongated holes to allow mounting on a multitude of mounts and comes supplied with the mounting hardware.

View the wide wing button here

August 12, 2021

Maclan M32e Pro 200 ESC & MR8.4 series motor

Maclan Racing have introduced their new M32e Pro 200 Competition 1/8th ESC and all-new MR8.4 series motor for 1/8th competition applications. The M32e Pro 200 is purpose-built for the 1/8th scale eBuggy and eTruggy applications with upgraded internal components ensuring the operating temperature is lower than its predecessor. With silicon coating on the circuit boards, the M32e also offers better durability for the 1/8th scale competition environment. It utilises a full aluminium case that ensures maximum thermal dissipation and extreme durability and the 30mm HV turbo ESC fan provides that extra insurance to cool down the ESC in extreme ambient conditions. The super-switch-mode BEC is designed to handle true HV for all types of servos from 6V to 8.4V.

View more images & details here

August 11, 2021

Penguin Cat L1 Evo Dart body

New from Penguin Custom Bodyshells is this Dart body for the Cat L1 Evo. The L1 Evo Dart body is designed to compliment the Cougar LD2 kit shell. It keeps the car flat through corners and is designed for high grip, with aerodynamic flicks down the side directing airflow over the wing to the rear. Supplied clear and available in both standard 0.75mm and lightweight 0.5mm version, it includes window masks and Penguin decals.

View another angle here

August 10, 2021

Team Associated Pro2 SC10 RTR

Team Associated’s Pro2 SC10 is a Ready-To-Run RC replica of the Pro 2 trucks driven in Off Road Racing. It features a rear motor short-course chassis that uses many of the same parts from the widely successful RC10SC5M platform. Adjustable aluminium big-bore coil-over shocks, a sealed-gear differential and heavy-duty CVA driveshafts are all features that come standard on the Pro2 SC10. A powerful water-resistant Reedy electronic speed controller and 3300kV electric motor power the Pro2 SC10 for hours of high-speed fun. To handle the power the Pro2 SC10 comes equipped with realistic Method Race wheels and tires specifically made to handle any off-road condition.

View more details & images here