Red RC » P Off Road

January 8, 2021

PSM S35-4 FC System V2 engine mount

From PSM Racing for the SWorkz S35-4, this new FC System V2 engine mount features a unique design and race proven strength along with premium build quality. Also compatible with the S35-3, this system features a straight (0°) engine mount design which provides an alternative to the kit standard 6° degree angle. The zero (0°) angle design also provides improved, more linear corner speed compared to an angled engine which tends to push the vehicle out in corners. Available exclusively through MW Handel GmbH.

View another image of the engine mount here

January 7, 2021

JConcepts 2007 Cadillac Escalade MT body

As the monster truck segment evolves, options are key and with a range of sizing, wheelbase requirements, the Escalade by JConcepts fits several trucks currently on the market, including the Losi LMT. On the design side, the dramatic grille is placed front and centre with the stunning and tall front headlights to create an impact. In the world of SUV’s there is nothing more iconic than the look and stance of the Escalade. The high-slope windshield angle cuts through the air with a tightly compressed rails on top to channel air over the large cab and rear enclosure. The SUV allows a lot of space for doors and windows but also decoration space for paint and decal schemes. Following the fenders along the door lines, the Escalade is rather slim and upright and the built-in trim on the panels creates a rather accurate and durable design. The fender flares are larger in size to accommodate the monster truck sized tires like Renegades, Firestorms, Golden Years and JCT’s. The rear gate section has body lines for a large rear window and impression area for license plate blending into a wrap-around style rear bumper. Included in each body set, a clear and heavy-duty polycarbonate body, decal sheet and the paint mask for all windows.

View another angle of the Escalade here

January 7, 2021

Axial 1/10 scale RBX10 Ryft 4WD

Axial have introduced another first with the 1/10 scale RBX10 Ryft 4WD. This ready-to-run vehicle lets any RC driver experience the thrills of rock bouncer off-road action. Full-size rock bouncers refuse to stop, or even back down on the throttle, when facing steep climbs and massive rocks. So does the RBX10 Ryft 4WD. The robust, custom tube chassis is engineered from a high-strength composite plastic that withstands the hard knocks of RC off-roading, even while moving at the high speeds produced by a strong powertrain featuring a 4S-capable, 2200Kv brushless motor. Both the front and rear axles boast a rugged two-piece, solid axle design. Licensed Interco TSL Bogger tires on Raceline wheels, aided by long travel front and rear shocks, do their part to tame wild off-road tracks. These features, along with a full-time 4WD transmission, make the RBX10 Ryft a fun vehicle to send over the trails at full throttle.

View more details & images here

January 5, 2021

JConcepts 2.2″ Stadium Truck Sprinter

The Sprinter tire from JConcepts is now available in a 2.2″ Stadium truck variant. Featuring square, angled pins that are stacked vertically to flex and fold evenly across the tire the company started with a new tread and focused on durability and performance to bring a rear tire option to market that competes on loose surfaces which are wet or dusty. The outer sidewall of the tire has angled pins incorporated into the design to help release the turn and provide the rotation not only needed in dirt off-road but specifically in dirt-oval racing. The blended tread to tire body is supported with a generous radius which promotes “pin snap” and resists tearing or separation. Horizontal traction bars connect several pins near the centre of the tire which bonds a critical area for increased push at high-speed. The sidewall area blends nicely into a step-spike feature which helps smooth the transition in bumpy sections and create side-bite.

Source: JConcepts [jconcepts.net]

January 5, 2021

175RC B6.2 HD titanium turnbuckle set

New from 175RC is this HD titanium turnbuckle set for the Associated B6.2 and B6.2D models. Titanium is stronger and lighter than the stock turnbuckles and the turnbuckles are directional, allowing you to identify the direction that they should be installed. These Turnbuckles are the Heavy Duty version with a thicker diameter for even more added strength. The package includes six turnbuckles, front and rear camber link and steering link and are available in natural silver or black.

View the black versions here

December 30, 2020

T-Work’s Airflow 1/8 buggy wing

T-Work’s have come up with a new 1/8 buggy wing which features a wickerbill design that allows greater air flow which increases the downforce when needed. Available in three colours, black, white & yellow, the Airflow wing has pre-drilled holes which saves you the hassle to have to drill them yourself. The package includes wing, as well as two wickerbills.

View more images of the wing here

December 29, 2020

LC Racing +2mm aluminium servo arm

LC Racing have produced this +2mm aluminium servo arm for their LC12B1 1/12 buggy and 1/14 EMB series vehicles. The longer servo arm gives a faster steering response and the material used improves strength. Red anodised, it features a 23T spline.

Source: LC Racing [lcracing.net]

December 28, 2020

Pro-Line PowerStroke shocks for Arrma 3S & 4S vehicles

Pro-Line have introduced their high-performance PowerStroke Shocks specifically designed for your Arrma 3S and 4S vehicles. They include 14mm big bore aluminium shock bodies with infinite spring pre-load adjustment, strong machined aluminium shock caps, beefy 3.5mm shock shafts and true dual-rate springs for a massive performance and durability upgrade over the stock shocks. Pro-Line have also released a complete set of optional dual-rate front and rear springs. Mix and match the different upper and lower spring rates to dial in your suspension to the conditions. The 3 different upper and lower rates allow for 9 different combined spring rate options.

View the shock springs here