Red RC » P Off Road

November 10, 2020

JConcepts RC10 standard front axles

JConcepts continue with their vintage car part releases and one part that brings the originality of the RC10, RC10B2, and RC10B3 together is the original length front axle. While using the stock offset front wheel, having the standard length axle contributes to the original stance and performance of the iconic vehicles. JConcepts has re-created these parts in 7075 aluminium, anodised black, threaded on the outside for the original style nylon wheel nut and in addition, threaded inside for 4-40 set screws (not included).

Source: JConcepts [jconcepts.net]

November 10, 2020

JConcepts RC10 Mono wheels

JConcepts supports the vintage RC enthusiast with the release of new Mono wheels. The original offset front and rear wheels for the RC10, RC10B2 and RC10B3 have been highly sought-after for years by drivers looking to outfit a restoration project or racers actively racing their vehicles. The 2.2” Mono wheels are inspired by the originals, feature the iconic dish shape with the rear wheels utilising the pin drive setup for 3/16” axles while the fronts accept a non-flanged 3/16 x 3/8” bearing. JConcepts has taken the liberty of increasing the wheel width to the inside in order to accommodate today’s race tires. The wheels include a vent hole on the outer diameter and an added outer “catch” to reduce the ability for glue to run down the face of the wheel during application and curing. Mono wheels are available in bright white and fluorescent racing yellow and packaged 4 pieces per pack.

View the Mono front wheels here

November 10, 2020

T-Works adjustable clamping servo horns

T-Works have introduced their new adjustable clamping servo horns. Available in two different versions, standard and +5 as well as for both 23T and 25T splines, the new horn features an insert to precisely locate the lever mounting hole. Between the two inserts there is a range of mounting position from 17mm to 20mm from the pivot point and with both the insert and servo arm made from high quality aluminium, as well as the use of a clamping screw, the entire arm assembly is rock solid.

View the other servo horn type here

November 9, 2020

LC Racing LE lightweight pit mat

New from LC Racing to commemorate their 7th Anniversary, comes a limited edition lightweight pit mat. The mat measures 100x50cm and with a thickness of 1.5mm, it is made from a special durable fabric that will stand up to regular usage while looking new for an extended period of time. The pit mat is made of black material and it features LC Racing along with the outline of their LC10 B5 4wd buggy.

Source: LC Racing [lcracing.net]

November 7, 2020

SWorkz 1-Unit-Fit motor mount

A new development from SWorkz is the ‘1-Unit-Fit’ motor mount. This not only makes it easy to change the engine quickly, it is also super convenient to set 2 different engine inclination angles. The motor mount is available with a 6 degree tilt angle or a 4 degree tilt angle which allows the chassis balance to be changed during jumps or in high-speed curves. By simply loosening 4 screws you can easily change your motor without having to realign it each time.

View the set here

November 7, 2020

ONG Shock caps & membrane set

ONG have introduce their new shock caps which have been made in Italy in Ergal 7075 T6 and then hard anodised and branded with the ONG logo on the front. The 6 upper machined pockets on the cap have a dual purpose, reducing the weight of the cap, making it the lightest on the market as well as helping with heat dissipation. The 3 bleed holes coupled to the new membranes will allow a rebound close to 0 and a homogeneous response between the shock absorbers once closed. The kit includes 12 membranes with 3 different hardnesses that will allow you to vary the behaviour of the shock absorber based on the track, the driving style and temperature.

View more images of the shock caps here

November 6, 2020

Reds Racing R5R Racer 5.0 engine

The new R5R Racer 5.0 from Reds Racing has been fitted with a brand new one-piece cooling head to improve engine cooling and efficiency. Designed with a 5 ports sleeve and crankshaft timing to improve fuel efficiency and drivability and is suitable for both buggy and truggy this new engine is equipped with the best technology to improve reliability and guarantee the best performance on all terrains. R5R Racer factory tuned guarantees the same performance as a Pro engine at reasonable price and every single engine is hand inspected and compression checked inside their headquarters by Mario Rossi to achieve the highest quality standards. The feature set includes a 5 ports sleeve with boosters, HCX horizontal carburettor, silicone filled and tuned crankshaft, high sealing Japanese front bearing and Swiss made steel high quality rear bearing.

Source: Reds Racing [reds-racing.com]

November 6, 2020

Ministry Of Bearing 3 or 4 shoe clutch

Ministry of Bearing have introduced their new 3 and 4 shoe clutch system. The set is available with 3 or 4 pin flywheel, clutch assembly and springs with a range of shoe materials and combinations available. Similar to other versions on the market that can be used in a 3 or 4 shoe configuration, the entire assembly is red anodised and works with the majority of 1/8th offroad cars and clutch bells.

Source: Ministry of Bearing [ministryofbearing.com]