Red RC » P Off Road

November 26, 2024

JConcepts Arina 1:8 Buggy tire

A new design from JConcepts is the Arina 1:8 Buggy tire that features a unique elliptical pattern scattered throughout the tire surface. Available as pre-mounted in sticky green compound on bright white or fluorescent yellow rims, it produces heavy forward bite. The centre section, called the “marina” has parked back-to-back shaped pins that provide the difficult task of holding the grip during high-speed expansion. In-between, the half-height, dog bone shaped pins create more contact patch after initial tire wear is complete. A large and patterned arrangement of horizontal style pins complete the entire carcass giving it performance characteristics like JConcepts legacy tires like the Crossbow. Each pin has a slight and divided recess which gives multiple edges of bite during fresh outings on the track. The crisp nature of the pins is excellent in slightly fluffy conditions, fresh water, and outside loam is where the Arina excels above many others.

Source: JConcepts [jconcepts.net]

November 22, 2024

JConcepts RC10B7 Option Parts

JConcepts has just dropped a range of new option parts for the World’s most popular 2WD 1:10 Buggy, the Team Associated RC10B7. First up is a Standard & -4mm hard anodised 7075-material chassis that maintains many of the critical and standard mounting geometry but features black hard anodising and additional pocketing in a progressive pattern. The -4mm length chassis weighs in at approximately 122g and with the addition of the angular pockets provides racers with another tuning option for the B7. JConcepts are also offering 7075-aluminium machined front bulkheads in both 0-degree, that allows the vehicle to maintain its original kick-up angle, and 2.5-degree variants that allows the racer to alter the kick-up angle of the buggy. Both are available in blue or black finishes. A steel electronics plate set and steel servo weight plate set which provide the ability to add or remove weight in a race car is the adjustability racers lust for. The steel servo weight plate is adjustable and features 2 pieces. The main body of the plate weighs 9.5g making it slightly heavier than an aluminium option. Adding the included optional insert of 8g boosts the weight to a combined 17.5g making it a hefty and adjustable item. The main body of the plate electronics weighs 18.6g while adding the included an optional insert of 16.7g boosts the weight to a combined 35.3g. Finally JConcepts has designed a user friendly and light-weight titanium axle specifically for the B7. The blooming flower design offers individual pads to support the wheel. This allows the part to reduce even more rotating weight on the axle and with the titanium material supporting the load, offers great durability. The titanium material axle anodised in either burnt blue or stealth black has performance and aesthetic advantages.

View more parts here

November 22, 2024

Matrix Red Giant 1:8 Offroad tyre

Italy’s Matrix Racing Tires has announced the release of their new Red Giant offroad tyre for 1:8 Buggy. Announcing its entry into the offroad market at the beginning of 2023, the reigning World Champion tyre manufacturer is describing the newest addition to its 1:8 Offroad line-up as ‘a new Game Changer’ with the Red Giant the result of hours of development by their R&D department. Claiming the IFMAR 1:8 Offroad World Championship in Spain in September with Davide Ongaro, Matrix don’t go into an specific details on the tyres pattern or the types of conditions the new Red Giant is best suited for.

View more images here

November 21, 2024

MiniPro Inertia Engine Dyno V2

MiniPro has announced it newest Engine Dyno which is designed for break-in, tuning and testing nitro engines. The new Inertia Engine Dyno V2 features include true engine torque and power by using an inertia flywheel with it also possible to brake-in your engine with data logging capability with the Dyno controller board having nine I/O ports for sensors. It also has a built-in throttle control sensor and Ambient Temperature, Pressure and Humidity sensor. The Dyno allows you to test engines under load with correction factor and its modular design allows different size engines and exhausts configurations. On the dyno the engine can be started with starter box, pull-start or electronic starter with the aluminium base with anti-vibration foot pads.

View more images here

November 20, 2024

TZO 400 1:8 Buggy Tire

Another new release from California based tyre brand TZO is the new 400 tire designed for maximum forward bite and side bite on loose, loamy tracks. Featuring a distinctive outer row pin layout that enhances grip in challenging conditions, with pins moved further out to the tire’s edge and new 3-rib carcass design they have created and refined another high performing tire in their 1:8 offroad line up. The centre section uses 402-style pins for exceptional acceleration, while the 202-style outer pins, combined with the unique layout, deliver superior cornering traction and control. This tire is ideal for racers seeking improved handling and forward bite on softer, loose surfaces.

Source: TZO Tires [tzorires.com]

November 20, 2024

JConcepts JCI Tucked 1979 Ford F-150 body

JConcepts has added another body shape to its crawler line-up with a Tucked version of the classic 1970’s Ford body. The iconic body style shaped and revised by Ford, specifically for the 1979 model year, features rectangular headlights and a one-piece centre grille. JConcepts meticulously set their sights on the 1:1 vehicle replicating the finest details of 1979. The heavily chiseled, square body look with enlarged, flat-top wheel wells set this body off as a favourite. The recessed body line extends down the entire side of the standard cab body and the included decal sheet details this section to appear like the chrome trim of yesteryear. The wrap-around front windshield, recessed side windows are outlined to perfection while the body lines are all in place to show off that vintage look. For crawling enthusiasts, the team from Groveland, Florida adapted the Tucked style to the front and rear sections of the vehicle. The vision for the project is for those wanting to replicate an original, but also be ready for competition equipped vehicles. The recessed bed area allows plenty of space for a variety of mounting applications as well as storage or placement of other scale accessories (not included). Large wheel well openings allow an assortment of tires ranging from 4.19” to 4.75” overall diameter tires.

View more images here

November 19, 2024

SuperRad SR-31 Super2RS 1:10 Frontie Body

US competition body shell manufacturer SuperRad has released its first 1:10 Front Wheel Drive Touring Car Body, the SR-31 Super2FT. Silhouetting the shape of Renault Megan Trophy car, the body is available in both a regular 0.7mm and Lite 0.5mm polycarbonate option and is BRCA approved. The clear unpainted body shell comes complete with a lights & grilles decal sheet , wing, and window masks.

View more images here

November 18, 2024

JConcepts Pioneer 2WD Buggy Wheel

While no one can reinvent the wheel, JConcepts attended the 2024 Florida Carpet Championship at Beachline Raceway with a fresh new wheel called the Pioneer that carry a hint of inspiration from the past. Created for the 2WD buggy class they boast unique features and aesthetics previously unseen with their inspiration coming from a 1989 Masami Hirosaka replica Jason Ruona envisioned recreating an iconic variation. The pop-out panels of the Pioneer wheels introduce a fresh look while maintaining the correct offset and mounting characteristics. Distinctive outer ribs fall between the sectional panels, forming a radial ring around the wheel nut area. These ribs connect the four screw locations, representing adaptors reminiscent of the golden age of RC racing. The Pioneer wheels are designed for both show and performance; racers looking for a fresh appearance, high-end performance, and a range of colour options will turn to these wheels in 2025. The dimensions of the wheels match the IFMAR World Championship-winning Mono wheels, featuring an industry-standard offset and durable construction. Reinforced inner ribs and a robust 12mm hex area complete this design. Each 4-pack of wheels includes decorative screws and will be available in popular colours, including bright white and fluorescent yellow. Additionally, JConcepts will introduce retro pink and stealth black colours as extra options.

View more images here